A dead battery, an alternator issue, or a bad starter are the three most frequent causes of a Nissan Versa not starting.
In This Article...
The reasons why your Nissan Versa Note won’t start and how to fix it
Although the Nissan Versa Note is a dependable travel companion, it is a machine with hundreds of interrelated parts, and like all machines, it occasionally fails to perform as intended. We discuss the most frequent reasons Versa Notes malfunction in this article, along with solutions.
The most frequent reasons why your Versa Note won’t start normally include a dead key fob battery, a dead 12 volt battery, corrosion on the battery terminals, a bad alternator, a clogged fuel filter, a broken starter, a blown fuse, an empty gas tank, an immobilizer error, or any other electrical system flaw.
Step 5
Try starting the engine and keep an ear out for any strange noises. Clicking sounds could be a sign of a bad starter. There may be an issue with the gasoline line or pump if the engine starts for a brief while before shutting off. If there is absolutely no sound, your Versa might have a broken ignition switch.
- Your Versa should be towed to a shop or your dealership if any of these troubleshooting techniques fail to identify the issue.
jas32
I always explained to my brother—who has no automotive knowledge—that combustion simply requires three elements: air, fuel, and spark.
Before you begin replacing parts, I would advise doing two things. Remove a spark plug, but keep it connected and grounded and leave it exposed. Check for sparks by turning the starter. If it doesn’t, your ignition isn’t working properly. If it sparks, there might be a gasoline issue. Check the spark plug’s condition to see if it is dry or submerged in fuel while it is out.
If there is spark, replace the spark plug and spray some starting fluid somewhere practical inside the intake manifold, perhaps close to the throttle body or air cleaner (a 2-3 sec squirt will do). Try to start the engine; if it starts, then dies, you have established that there is a fuel issue. From there, it may be several fuel-related factors (fuel pump, relay, clogged lines, dirty tank, fuel contamination, etc).
07Versa6MT
Have you checked all of your fuses and relays? There might be an ignition control module fuse, which would result in “no spark”… Before this, did anything weird happen? lately had to raise it? Unfortunately, there is no way to remove any of the plugs from these items, making it difficult to readily check for spark. To check for spark, I suppose you could look for a voltage pulse at the ignition coil plug that is the easiest to access. At this stage, checking the fuel pressure at the rail is a no-brainer. A faulty regulator might result in a full no-start, but, to my knowledge, they typically go gradually. If you turn the key on for two seconds, then off and on again, and then try to start the car, you can sort of isolate a fuel problem; if it starts and runs for a short while, the regulator is definitely the issue. If the fuel pump isn’t maintaining system pressure, your issue is that it will typically power up for approximately 2 seconds in the KOEO position (key on engine off) to develop system pressure before shutting off. Try turning the fuel pump on and off several times, or even jumper the fuel pump relay to give it constant power while you attempt to start the vehicle. I’m not sure if the fuel pump can run continuously on the Versa’s electrical system. IPDM could stop that. Still worth a shot.
Common causes of this include:
Bad starter: Starter motors can deteriorate and begin to malfunction over time. If this is the issue, a new starter needs to be installed. The starter is not the issue if the car starts. The starter may be at fault if the ignition is turned on but nothing happens, or if the engine turns over very slowly and the dash lights dim while the engine is cranking.
Poor Relay Wire: The starter motor may not operate if the starter motor’s starter motor wiring is loose or damaged. It will be necessary to replace or fix the wiring.
Dead or low battery: The starter motor requires electricity from the battery to function. The starter motor may not run if the battery is weak or failing to supply adequate electricity. This issue should be fixed by charging the battery or replacing it.
The battery terminals may also be loose or have developed corrosion. It is advised to clean and tighten the cables and terminals.
Failure of the Solenoid: The starter system frequently experiences problems with the solenoid, which makes it challenging to start the car. To identify whether the beginning motor or solenoid is the issue, the starter must be examined. The malfunctioning solenoid must be replaced.
Ignition Switch Failure: One of the most typical signs of an ignition switch failure is that the car is difficult to start. If the ignition switch is warm to the touch, there may be a problem with the wiring for the ignition switch. A malfunctioning ignition switch will eventually cease to function entirely and will require replacement.
Fuel pump defect: If the engine is not receiving enough fuel, starting will be challenging, if not impossible. When the fuel pump does not provide enough fuel, the automobile will start slowly and eventually not at all. The fuel pump is in charge of transferring fuel from the tank to the injectors.
Spark plugs, which produce the spark that enables a vehicle to burn fuel, are fouled. One of the most frequent causes of a hard starting engine is fouled plugs. The voltage needed to leap the gap and ignite the fuel rises as the electrodes deteriorate. This may result in the engine taking longer to start.
Clogged Fuel Filter: A clogged fuel filter might make it exceedingly challenging to start a vehicle. The fuel filter, which removes impurities, might clog up over time. This will make it difficult to start the car since the injectors won’t receive enough fuel.
Fuel that has been contaminated by too much alcohol or water will make it difficult or impossible to start an automobile. Even if it does start, tainted fuel can cause the engine significant harm. Immediately get the vehicle inspected if fuel contamination is suspected.
How do you use a key to start a Nissan Versa?
An essential component of a car is remote start, which enables you to start the engine and regulate the cabin’s temperature to your preferences, keeping you warm when it’s cold outside or keeping the cabin cool when it’s hot outside.
The remote start feature is denoted by a circular arrow button on the key fob for your Nissan Versa. Your Versa can be remotely started by simultaneously pressing the lock and circular arrow buttons and holding them down for at least 2 seconds.
Your parking brakes turning on indicates that the engine has started and will run for ten minutes without a key. You will be able to use the remote starter once more for another 10 minutes, after which you will need to start your engine manually. If you don’t turn the key in the ignition or use the push-button within that time, your vehicle will not start.
Through NissanConnect, you may also use your smartphone to use the Versa’s remote start option. Using the MyNissan Owner Portal or the NissanConnect Services app, you can remotely start your car. As a security measure, a PIN is added to the MyNissan Owner Portal or the NissanConnect Services app.
Your Versa’s engine will run for 10 minutes after remote starting. The engine will need to be started with Nissan’s Intelligent Key before you can send another remote start command if you’ve already sent two through the NissanConnect Services app or MyNissan Owner Portal, or if it hasn’t been started in the previous 14 days. It utilizes a cellular network, so depending on where you are, the connection and signal quality will vary.
The Nissan Intelligent key must be outside your Versa, the hood must be closed, the brake pedal must not be depressed, the transmission must be in the “park” position, and the doors and windows must all be locked.
Even after the engine has been started, you can stop a remote start command by sending a Remote Engine Stop command through the MyNissan Owner Portal or NissanConnect Services app.
With features like these, you can make sure your Versa’s inside is in the condition you desire before hitting the Middletown, Connecticut, roads.
*Vehicle pricing includes all relevant discounts, including loan and/or lease incentives (such as VPP owner loyalty, military, college graduate, private offer, etc.); some discounts may or may not be available to all buyers. The prices for the vehicles indicated do not include acquisition costs, tax, title, registration, destination, and the $699 dealer doc charge (negotiable). Final cost is determined by extra accessories, sales, or aftermarket purchases; credit is never used. Even though every effort is taken to assure the correctness of the material on this site, mistakes can nevertheless happen. If in doubt, please check the information with a customer service agent. For further details, consult the dealer. Prices, where available, exclude the cost of a certification upgrade (7 year or 100k mile powertrain warranty from original in service date.)
How can you use a dead key fob to start a 2021 Nissan Versa?
- To release the little latch, flip the key fob over and press the button.
- Find your concealed emergency key at the base of the fob and remove it.
- Unlock the driver’s side door by inserting the key.
- Step inside your Nissan.
How is a Nissan remote starter started?
Your key fob’s lock button should be pressed. Simply hold the engine start button on your key fob for five seconds after pressing the lock button for the car to start.
How much does a Nissan Versa starter cost?
Estimated cost of replacing a Nissan Versa starter. Nissan Versa starter replacement typically costs between $406 and $590. Between $88 and $111 is projected to be the cost of labor, while $318 to $479 is the expected cost of parts.
when all the lights are on but your car won’t start?
If your headlights work but your car won’t start, your battery is charged but the starter or ignition isn’t working properly. A starting engine can be jumped using a charged battery if the starter or ignition is the issue.
How do you push a button to start a Nissan?
You might not immediately think of a remote start when you are purchasing a vehicle. When you have to go for work in the cold, you will however appreciate the value of this feature. Despite the fact that we’ve all had this experience, the remote start option isn’t what drives car purchasers to acquire a vehicle. If you fall into this category, we suggest that you get a car with this technological function.
A remote start is standard on most recent Nissan vehicles. You’ve come to the right place if you’re seeking for information about using Nissan remote start.
You can test drive any of the current Nissan vehicles at our Middletown, Connecticut, location. East Hampton and Meriden are only a short drive away from us.
Most likely, if you drive a Nissan with a higher trim level, you have remote engine start. Verify the key fob. If it features a circular arrow button, you can start your car from a distance. Even if the doors are locked at this point, push and hold the arrow button for two to three seconds before pressing the lock button on the key fob. Your car’s parking brakes turning on indicates that the engine has started. It runs for 10 minutes after it starts.
The best Nissan facility in town is our Nissan dealership. If you want to learn how to use the remote engine start, come to us.
You can use the key fob to remote start the vehicle once more if you forget to press the start button or turn the key in the ignition before the 10-minute grace period. After that, you must manually start the engine.
The remote start function has several amazing advantages. Before you get in, the heater will turn on and warm up the interior of the vehicle, including the engine. Keep in mind that you may rapidly turn on your air conditioning throughout the heat by using this tool.