Where To Put Water In Nissan Juke?

Where to put coolant in a Nissan Juke is the phase that you are probably most curious about. Now that you know how important it is to maintain the optimum level of this coolant, you can take action. Here are the many methods to help you locate the Nissan Juke’s expansion tank, which is fairly simple to identify and houses the coolant:

  • Wait a few minutes or so for your engine to warm up before taking any action to avoid getting burned when checking the coolant level.
  • Your car’s hood should be opened.
  • The expansion tank for your Nissan Juke’s coolant must be promptly located; it is typically located in one of the four corners of the engine block. To locate it, simply search for a plastic container with a black or yellow plastic cap and a danger symbol or thermometer on top.

You’re here

Home | Nissan Juke coolant replacement instructions (2010 to 2017 petrol and diesel engines)

Do you have a 2010–2017 Nissan Juke that needs its coolant replaced but are unsure where to begin? You can watch this video guide to learn how to accomplish it step-by-step.

The video was shot in our workshop, where we disassemble each automobile before rebuilding it to create our best-selling car repair manuals. Our 2010–2017 Nissan Juke manual is available as a traditional printed book and covers 60–17 reg plates with both gasoline and diesel engines. The online manual edition, which includes 20 additional films like this one, is also available.


To prevent seals from deteriorating and developing leaks, Nissan vehicles manufactured in 2009 and later require an engine coolant made of ethylene glycol phosphate that is devoid of silicate, borate, nitrite, and amine. Blue coolant is Nissan OEM and “Asian” coolant. A suitable blue coolant in concentrate and 50/50 is produced by Recochem OEM. The 50/50 split is for uncomplicated radiator drain and filling and top-off. Because some water will remain in the system after a flush and fill (repeated distilled water fills and drains), concentrate is perfect for this. After flushing, add concentrate at 50% of the coolant volume (and optional water wetter, like those from Red Line or Royal Purple), then fill the cooling system to the top with distilled water to ensure a 50/50 mix.

In what part of a car engine do you put water?

The best way to avoid overheating in your car is to use coolant in the radiator. If you don’t have any water, you can still utilize it in a hurry. Just keep in mind that water boils more quickly than coolant, so you should swap it out as soon as you can.

Once your car has cooled down, you must remove the pressure cap in order to add water to the radiator. If your automobile is overheating to the point where there is steam, you can also add water to the coolant reservoir or recovery tank.

The liquid used to stop cars from overheating is called coolant. In an emergency, you can also use water, or you can combine both in a 60/40 ratio.

Every car has a dashboard symbol that shows when the coolant is low or the engine is overheated. Steam flowing out of the engine when you open the hood is another indication of insufficient coolant. To be proactive, it’s better if you frequently check the level.

How can I add water to my car?

If your coolant level is too low (below or close to the lower mark), fill it off by adding pre-mixed antifreeze directly to the reservoir or mixing water and antifreeze 50/50 (for typical driving conditions). In an emergency, you can use clear tap water, but antifreeze should be applied right away. DO NOT OVERFILL since doing so could cause the antifreeze to heat up and harm the entire cooling system.

Can you fill your automobile up with only water?

Due to its narrow range of boiling and freezing points and inability to safeguard the engine of your car, water cannot substitute for antifreeze on its own. Additionally, it doesn’t absorb heat as well. You can use water in your coolant rank in a severe situation.

Should I add water to my car battery?

A. All batteries once required the addition of water. In actuality, monitoring the water level during an oil change was normal practice. Most batteries today don’t require any maintenance.

When does your car require water, and how do you know?

Despite the numerous advancements in automotive technology over the years, you probably still need to check the levels of your car’s fluids, the most crucial of which being oil and water. We have a few suggestions for you if you’re not sure why or even how.

Your engine’s oil is the substance that keeps everything running smoothly. Your engine will gradually lose oil, and if it entirely runs out, it will seize, which is about as horrible as it sounds. Worst of all, frequent oil checks may have fully prevented a seized engine, which is a very expensive undertaking.

The same holds true for checking the water levels in your engine. The engine of your car is cooled by the water that circulates around it. Your car stands the risk of rapidly overheating without water in the system, which could harm the engine.

The process to check the oil level in your car is simple. First, stop your automobile on level ground and check to see that the engine is off so that the oil can settle.

Find the oil dipstick; it should be easy to identify thanks to its brightly colored handle. Check your owner’s manual if you can’t find it.

Pull out the dipstick once more after replacing it in its holder. The oil level indicated on its marks may now be seen. The oil should ideally be positioned halfway between the minimum and maximum notches.

Make careful to top off your oil if it falls below the required level, but make sure you use the right grade for your engine. You should find a mention of this in your owner’s manual. If not, don’t be afraid to get in touch with an expert.

Even though it’s still very necessary, you should only check your car’s water levels while the engine is cold. Checking your car’s water levels is a much simpler task.

Lift the bonnet of your automobile and make sure it’s fastened before checking the levels. Once you’ve found it, check to see that the water level in your coolant reservoir is between the minimum and maximum limits. Do not forget to fill up if it is not.

If you’re having trouble finding the reservoir, check your owner’s manual or ask a specialist for assistance.

Visit your nearby Midas repair center or make an appointment online right away if you’d like to have a qualified mechanic check these things out on your vehicle.

Can you replace the coolant with water?

Your radiator system becomes more contaminated when you use water. Although using water instead of low coolant is significantly better for the engine, you should switch the water out as soon as you can for the proper coolant for your car.

Any remaining coolant in the radiator is diluted when water is added to it. Preventing corrosion, raising the boiling point of water, and reducing the freezing point of water are just a few of the crucial jobs that coolant does. While using water in place of the coolant will allow you to drive the automobile for a brief period of time, your engine won’t be adequately protected.

This means that the radiator needs to be filled with a 50/50 mixture of coolant and water as soon as the issue that led to a low coolant level is resolved.

How often should I fill up my automobile with water?

Most automakers advise changing the radiator fluid in your automobile every 24 to 36 months, or every 24,000 to 36,000 miles. However, the frequency of required radiator fluid changes will also depend on your individual driving habits.

Why do I need to fill up my car with water every day?

Your car’s coolant is a crucial fluid. Without it, parts will overheat and ruin your engine, necessitating costly repairs. There is a good probability you have a coolant leak if you see fluid on the ground where you park or need to regularly add more coolant to the engine.

The intricate cooling system in your car circulates across the whole engine. A leak can happen in many different areas, and identifying it can be challenging. Discover the most frequent reasons of a coolant leak and how to fix them by reading on.

Why does the water in my car keep leaking?

Unmistakable indicators of a coolant leak can occasionally be seen, such as steam beneath the hood or odd droplets on your garage floor, but not usually. A small crack in the hose, a tiny hole in the radiator, or a problem with the water pump could all be the cause of disappearing engine coolant. Additionally, a coolant leak could appear inside your car or it could just vaporize into mist thanks to your defroster.

Once your automobile has been parked overnight, check for signs of a coolant leak in the morning. Find any puddles or drips on the ground beneath your car’s hood. If you discover any liquid that resembles coolant, open your car’s hood and visually examine the components above, particularly the hoses that connect to and depart from your radiator. Additionally, look for moisture on your radiator’s underbelly.

Can coolant just be diluted with water?

Only in an emergency situation when the coolant liquid level is lower than it should be, should coolant be topped off with water.

You shouldn’t rely on topping up with water to bring you safely to the closest garage and help you find any problems.

A small amount of water added to coolant shouldn’t cause any significant harm, but too much water will lower the coolant’s boiling point and prevent it from performing as effectively.

Can water be used as coolant in a car instead?

Although a car won’t overheat if you use water instead of coolant, it’s not advisable to do so because water might freeze and seriously harm your engine. Water cannot overheat in high temperatures because antifreeze has a lower boiling point than water. If water were to boil over, it might harm the cooling system and engine of your car.

How can I check the water in my tank?

By lowering a wetted steel tape into the well until the lower portion of the tape is submerged, you may determine the depth of the water. The final few feet of tape include a chalk coating that shows the precise water level.

How far can a car go while its radiator is full with water?

In general, as long as it’s above freezing, you may replace a car’s lost coolant with regular tap water or even water from a ditch or stream in an emergency to allow you to travel a few miles or even 100 miles.

What happens to coolant if I don’t add water to it?

3 is the requirement that water be incorporated into the antifreeze-coolant in order to maintain the suspension of the performance additives (silicates, phosphates, and nitrates). These significant additions have a tendency to settle absent water. If they do that, you will no longer have additional protection against corrosion.

Can I fill my radiator with plain water?

In an emergency, such as when your engine is overheated and you are out of coolant, you can fill your radiator with plain water. However, it is not advised that you travel a long distance with only straight water in your radiator because this could seriously harm your engine.