What Wheels Fit Nissan Hardbody?

You are aware that these are designed for an Isuzu vehicle, don’t you? Look around at tire rack or budget tires; some of those websites sell rims that resemble those.

Additionally, ebay can actually match wheels that will fit your truck properly if you enter the specifications of your car. However, to be safe, perform a dry fit on your truck before having tires placed on them. Apply a lug nut, then verify the ride and steering clearances.

Thank you for your comment. I have stored my truck in my eBay app, and those parts appear to fit, but I’m not sure if they do, which is why I wanted to check around. What is a dry fit, too?

To ensure that the rim fits properly and that you can turn with the size of the tire, you can mount the rim and only the rim to the car in a dry fit. You’re stuck with new rims you can’t use if you mount the tires first, fit, and it doesn’t fit.

Most, if not all, retailers of rims will not accept rims for return if tires have already been put on them. So to save a ton of money, make sure to get a dry fit done first.

Many XEs that resemble that one have a stock 15×6 chrome wheel that was supplied by Nissan Hardbody 4×4. You could probably find a complete set of old ones for less than $100. If it were up to me, I’d check out the Frontier SE’s original 16×7-inch four-spoke alloy wheels.

Re: Cross-referencing D21 tires and wheels (seang)

From 1986.5 to 2004 all D21/D22 Hardbody/Pathfinder/Xterra/Frontier wheels should be interchangeable. The 96-04 R50 Pathfinder rims and, in my opinion, the 720 4×4 rims will also bolt up.

This lug pattern, 6 on 5.5″, is highly popular. All of the wheels used by the Nissan models I specified will bolt up. Naturally, tire size must be appropriate for the vehicle, but generally speaking, a 31×10.50 tire is the largest that fits without lifting on 4x4s, while a 235/75/15 tire (about 28.5″) is the largest for small 2wds. Lower aspect ratio tire sizes can be used with larger rim diameters. A 4×4’s brakes will not be cleared by 14″ 2WD rims.

Can a Nissan Hardbody be drifted?

Nissan Hardbody trucks are not “built” to drift, it should be noted. While it is feasible to slide them stock, making a few changes will make it much more fun. The two categories of modifications are D21-specific and general drifting modifications.

If you already have a limited-slip differential, the rear leaf springs are the main problem. Although leaf springs offer among of the simplest lowering techniques (using blocks, it can be lowered a few inches for only $50), they have sluggish reflexes and are too soft for abrupt shifts.

The greatest thing you can do for these automobiles is to replace the suspension and switch to double wishbone or four-link. Online resources include fantastic lessons and information that walk users through the full procedure.

The other suggested changes are more generally applicable to drift cars. This uncomplicated truck may be transformed into a drifting machine by installing a hydraulic handbrake, a turbo kit, bucket seats, welding the differential (if a limited-slip differential is not available), and adding negative camber.

The D21 is a Nissan Hardbody, but why?

Informally known as Nissan Hardbody in the US was the D21 series. The term “Hardbody” describes the truck’s double-wall bed and general design. The Hardbody, which competed directly with the Toyota compact truck on the American market from 1986.5 to 1997

Nissan stopped producing the Hardbody when?

In 1986, the Datsun/Nissan 720 pickup was replaced by the D21 generation Nissan truck, which was marketed differently depending on the country you were in.

It was sold as the Nissan Hardbody here in North America, and compared to the 720 it replaced, it had considerably more stylish and contemporary-looking fenders and bumpers.

In the US, the Hardbody was offered with both long and short beds with either a conventional or extended cab design.

There were two different engine variants available on the US market. Most trucks featured a 2.4L four-cylinder engine, originally from the Z-series before being switched out in 1990 for the KA24E SOHC motor. Notably, this was the same engine that ran the 240SX sold in the US in 1989–1990.

Nissan’s popular VG line of V6 engines, with a 3.0L displacement, was also an option. In foreign markets, four-cylinder engines with smaller displacements and turbodiesels were available.

A four-door crew cab was also offered in other markets, but not in the US, as was the case with the majority of Japanese pickups in the 1980s and 1990s.

Are Nissan Hardbodies considered Frontiers?

  • Three Nissan Frontier concept pickup trucks are being unveiled today in preparation for the 2022 Chicago auto show.
  • The Project Hardbody concept car, which honors the Nissan Hardbody from the late 1980s, has wheels that are modeled after the Desert Runner pickup from a similar era.
  • The Project Adventure is the more contemporary of the three and is targeted at overlanding fans. The Project 72X is reminiscent of the Datsun 720 pickup with white wheels and body side graphics from the 1970s.

The inspiration behind two of the three Nissan Frontier ideas at this year’s Chicago auto show will be readily apparent to enthusiasts of vintage pickup trucks. Both the gray Project 72X and the red Project Hardbody concept cars are based on pickup truck designs that were instrumental in the Japanese company’s growth in North America throughout the 1970s and 1980s.

recent reviews and news on the frontier:

The Project Hardbody truck, which is perhaps the most well-known of the designs, is modeled off the Nissan pickup from the late 1980s. Its unique wheels are obviously influenced by the Desert Runner edition of the previous Hardbody pickup. Nissan also added a distinctive gloss-black grille surround, unique 4×4 graphics, and a full-size spare tire mounted on the bed to the concept car.

Readers with keen eyes will immediately recognize the Datsun 720 pickup from the late 1970s as the Project 72X’s source of inspiration. This more straightforward design has a gray exterior and side graphics that are custom-made in a vintage manner. The wheels on the Project 72X are really spare wheels from the normal 2022 Frontier pickup truck that have been painted white.

Nissan also unveiled the Project Adventure concept, which is based on the PRO-4X trim of the 2022 Frontier and features knobbier off-road tires, a unique carbon-fiber snorkel, and a slew of camping accessories to highlight the Frontier’s overlanding capabilities. If classic pickup truck looks aren’t your thing, Nissan also has a number of other concepts on display.

The Project Adventure wears improvements that are now offered through aftermarket vendors or through the Nissan accessory catalog, save from the bespoke body wrap and the snorkel. All three of these ideas have elevated suspensions, with the 72X receiving a 2.5-inch lift, the Hardbody receiving a 3-inch lift, and the Adventure receiving a 5-inch lift over the regular Frontier.

Any of these three ideas will probably only be produced in limited quantities or as special editions of the new Frontier. However, since the majority of alterations may be made in the aftermarket, think of these ideas as a starting point for your own unique design.

This information was pulled from a poll. At their website, you might be able to discover the same material in a different format or more details.

OpenWeb was used to import this content. At their website, you might be able to discover the same material in a different format or more details.

Which tire size fits a 1997 Nissan pickup?

2 Door Standard Cab Pickup, 6 Foot Bed XE, 1997 Nissan Pickup (215/70R14 96 S 6×14) According to our records, the tires on your car should be this size right now.

What kinds of car wheels are interchangeable?

Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.

By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.

How can I tell whether my rims work with them?

The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.

What is the lug pattern on a Nissan?

Nissan vehicles come in a wide range of lug designs, from 4×3.94″ to 6×5.50″. You need to be aware of the lug pattern for your specific Nissan model if you plan to replace your wheels. A

You must first determine the lug pattern if your Nissan’s wheels are broken, scratched, or if you just want to exchange them for a new size.


What vehicles were sold with a KA24E?

  • Nissan 240SX from 1989 until 1990.
  • Nissan Stanza, from 1990 to 1992.
  • Nissan Access and Nissan Prairie from 1989 to 1995.
  • Nissan Pathfinder, 1990-95.
  • Nissan Terrano II, 1993-96.
  • Nissan Pintara and Ford Corsair from 1989 to 1992.
  • Nissan Hardbody from 1990 to 1997

The Nissan Frontier weighs half a ton, right?

According on a truck’s GVWR, the United States classifies commercial trucks. The second-lowest category for trucks is Class 2a, which includes 1/2 tons. Class 1 is the score that is lowest. The GVWR of Class 1 trucks is less than 6,000 pounds. The Chevy Colorado, GMC Canyon, Ford Ranger, Honda Ridgeline, Jeep Gladiator, and Nissan Frontier are among the trucks with a Class 1 classification.

Which motor powers the D21?

For model years 1986.5–1997, the D21 Hardbody was produced with both four-cylinder and V-6 engine options. The 2.4-liter Z24i throttle-body injected four-cylinder with 106 horsepower was available from 1986 to 1989. It was succeeded by the 2.4-liter KA24E multi-point fuel injected four-cylinder with 134 horsepower (1990-1997). The 3.0-liter VG30i throttle-body injected V-6 (1986–1989, class-leading horsepower) was the V-6 option, and it had 140 horsepower. The 3.0-liter VG30E multi-point fuel-injected V-6 had 154 horsepower (1990-1995). Because of emissions, models from 1996 and 1997 could only be bought with a four-cylinder engine. A five-speed manual transmission or a three- or four-speed automatic transmission accompanied the engines.

There were standard Cab (single) and King Cab (extended) variants with rear and four-wheel drives, as well as six-foot and larger seven-foot bed options. Evidently, the long bed was the largest in its class. Fortunately, a four-door Crew Cab variant was released in some foreign countries! Base, XE, and SE trim levels were offered. Value packages with air conditioning, power mirrors, alloy wheels, and some chrome were available for late-model XEs. The SE had a package that included a sunroof, electric windows, power door locks, power mirrors, air conditioning, and unique alloy wheels in addition to its limited-slip rear differential. After a Nissan Hardbody won its class in the 1987 Baja 500, a super-sweet special version called the Desert Runner was created. Evidently, Nissan produced 1,000 of these.

The Hardbody saw several modest internal and exterior upgrades throughout the years, but it never lost its Hardbody-like appearance. A redesigned grille, white-numbered instruments inside, and modest changes to the front end were all introduced for the 1990 model year. 1993 trucks are distinguished by a distinctive gauge cluster and are the first to use a chrome “V” grille. 1994 versions include an updated interior with a new, curved dash style. In 1996, the installation of OBDII and a driver-side airbag was made.

Do small trucks have the ability to drift?

The finest vehicles for drifting on these shores are almost without a doubt compact pickup trucks, not cars. Pickups are almost ideal drifting vehicles in general. Rear-drive and incredibly light in the rear, even a regular truck will powerslide when provoked.

The majority’s size and weight are the only issues. But with as little as 300 horsepower, mini-trucks like vintage Chevy S-10s, Ford Rangers, or even the Courier, which was the Ranger’s precursor, will slide and stay that way for a while. low cost.