Nissan included a 215/60R16 tire with the 2012 Altima Sedan 2.5 S.
In This Article...
Size, Simplified: 215-60-16
Your 2012 Nissan Altima’s original tire size is P215/60R16 94H. Below is a color-coded description of the tire size for the 2012 Nissan Altima.
The tire size was made to accommodate wheels or rims with a 16-inch diameter.
With a load index of 94, this tire can support a load that weighs no more than 1474 pounds (670 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.
This figure indicates that the aspect ratio of your tire is 60%. In other words, 60% of the width is represented by the sidewall height of your tire, measured from the rim’s edge to the tread. The sidewall height in this instance comes out to be 129 millimeters.
This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.
The highest speed that may be maintained for 10 minutes on this tire is 130 mph (210 km/h), according to its speed rating of H. A faster pace becomes risky.
On what size of a Nissan Altima can you place tires?
The majority of contemporary Nissan Altimas have tires with a diameter of 16 to 19 inches. Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
What tire pressure is recommended for a 2010 Nissan Altima?
No matter if you drive a Nissan Altima from 2010 or 2021, each tire will need 32 PSI. The condition of your tires and your safety while operating the car are both impacted by this number. This is because maintaining even tread and providing you with the maximum amount of stability depend greatly on having proper tire pressure.
No matter what anyone tells you, the amount of pressure you require is not based on the size of your tires. The weight of your car will determine how much air your tires need.
Pounds per square inch is referred to as PSI. It does not measure how much air is in the tire. As a result, even if a larger tire needs more air, the vehicle still needs the same pressure to maintain its weight.
Furthermore, the PSI advised for your specific vehicle is not represented by the number on the tire. The tire can withstand this pressure up to a point. Look inside your door to find the PSI that your car needs. This information will be written on a sticker.
Can Subaru wheels be used on a Nissan Altima?
The wheel will be further out the higher the offset, which is the opposite for a lower offset. The XV uses the same bolt pattern and offset as the Forester, which has been in use for more than 16 years, expanding your selection of wheels. A lot of owners replace the OEM wheels, so don’t rule out alloys for winter wheels. Another option for searching is Craigslist.
Additionally, I might advise changing your profile to add a more precise location in Canada, which will assist with future and current regional suggestions.
What size wheels fit the Nissan Altima?
The tire sizes for the 2020 Nissan Altima are P235/40VR19, P215/60HR16, and P215/55VR17. The wheel (rim) sizes for the 2020 Nissan Altima are 19 X 8, 16 X 7, and 17 X 7.5.
What size steering wheel does a 2013 Nissan Altima have?
The steering wheel of the 2013 Nissan Altima is 14 1/2″ X 4″ (wheel diameter: 14 1/2″; grip circumference: 4″).
Why does tire size matter?
The sizes of motorcycle tires and automobile tires are often equivalent. The first three numerals indicate the millimeters of the tire’s width (mm). The aspect ratio, which is the height of the tire’s cross-section to its width, is represented by the next two numerals after the slash. The motorbike wheel’s diameter, measured in inches, is represented by the final two numerals following the dash.
What kinds of car wheels are interchangeable?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
What is a wheel’s offset?
The distance between a wheel’s hub mounting surface and its center plane is known as the wheel offset. Positive offset means the hub-mounting surface is closer to the wheel’s outboard side. Conversely, negative offset suggests it’s closer to the inboard side. If the mounting surface and the center plane of the wheel are parallel, then the offset is equal to zero. In other words, the lateral, or side to side, position of the wheel is determined by offset. The offset must be carefully chosen together with the new width as wheel widths vary to ensure that the wheel and tire have enough room inside the wheelwell to prevent friction or unwelcome contact with other parts.
Numerous wheel fitment problems can be resolved with the help of an understanding of wheel offset. Upsizing of wheels and tires frequently calls for different offsets. The handling of the car may suffer if the wheel offset is incorrect for the vehicle.
Don’t worry; Town Fair Tires’ comprehensive database enables our sales experts to recommend tires that are the ideal fit for your car.