Your 2016 Nissan Altima’s original tire size is P215/60R16 94T. Below is a color-coded description of the tire size for the 2016 Nissan Altima.
The tire size was made to accommodate wheels or rims with a 16-inch diameter.
With a load index of 94, this tire can support a load that weighs no more than 1474 pounds (670 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.
This figure indicates that the aspect ratio of your tire is 60%. In other words, 60% of the width is represented by the sidewall height of your tire, measured from the rim’s edge to the tread. The sidewall height in this instance comes out to be 129 millimeters.
This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.
The highest speed that may be maintained for 10 minutes on this tire is 118 mph (190 km/h), according to its speed rating of T. A faster pace becomes risky.
In This Article...
What are the tire size, pressure, and wheel size for a Nissan Altima?
The 2016 Nissan Altima is available with one of three different tire sizes mounted on three different sized rims, depending on configuration. Each of the 2.5 and 2.5 S models’ P215/60R16 tires is mounted on a 16-inch rim. The larger 2.5 SR, 3.5 SL, and 3.5 SR utilize P235/45R18 tires on 18 inch wheels, while the improved 2.5 SL and 2.5 SV each have P215/55R17 tires mounted on 17 inch rims. These shoes have a width between 7 and 7.5 inches. Depending on the load, the suggested inflation range for each of these typical load variants is 32 to 35 pounds per square inch. If your Altima has an XL variation, which is not very common, you can safely increase this (and certainly not from the factory). For typical operation, you should remain close to the bottom of the range, and close to the top if you are approaching your payload capacity of 952 to 1029 pounds, depending on configuration.
The 2016 Nissan Altima’s standard wheel size is 16 inches. The 2016 Nissan Altima’s tire size is P215/60R16. The 2016 Nissan Altima’s tire pressure recommendation is 32 psi.
What types of tires can you put on a 2016 Nissan Altima?
Depending on the year, model, and trim level of your Altima, the most popular tire sizes include 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires. Whatever tire size you have on your Altima, we have them available for you at the lowest cost available.
What tire size is used by a Nissan Altima?
Size of Tires The Nissan Altima provides three alternative tire sizes: the base P215/60HR16, the optional P215/55VR17, and the optional P235/40VR19. In addition, the tire measurements appear to be a mysterious puzzle that you must solve.
What does 2016 Nissan Altima tire maintenance entail?
The Maintenance Tire Light: What Does It Mean? When your Nissan’s tire maintenance light comes on, it’s time to rotate the tires as part of your normal maintenance program. (This warning light has nothing to do with tire pressure.) Thankfully, the tire maintenance light is not a cause for concern.
How big is the steering wheel on a 2016 Nissan Altima?
Size of the 2016 Nissan Altima steering wheel The steering wheel of the 2016 Nissan Altima is 14 1/2″ X 4″ (wheel diameter: 14 1/2″, grip circumference: 4″).
What tire pressure should a Nissan Altima have?
Are you concerned about your Nissan Altima’s tire pressure? Perhaps your low-pressure indicator lit up, but you are unsure of how much air your tires require. We looked into the matter, and the following is what we learned.
Tire pressure for your Nissan Altima should be 32 PSI. The majority of year models share the same number. Additionally, it is unaffected by the size of the tires.
You must understand how to check the levels now that you are aware of the recommended tire pressure. Continue reading to learn how to check the air in your tires, how often to check it, whether you can drive with low air pressure, and other topics.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
What is the Nissan Altima’s bolt pattern for 2016?
The bolt pattern on the 2016 Nissan Altima 2.5 SL is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
On a 2016 Nissan Altima, how do you reset the tire pressure sensor?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the reset button for the tire pressure monitor. Check the owner’s manual for your vehicle if you can’t find it.
What is the Nissan Altima’s bolt pattern?
We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
Why does tire size matter?
The sizes of motorcycle tires and automobile tires are often equivalent. The first three numerals indicate the millimeters of the tire’s width (mm). The aspect ratio, which is the height of the tire’s cross-section to its width, is represented by the next two numerals after the slash. The motorbike wheel’s diameter, measured in inches, is represented by the final two numerals following the dash.
How frequently should a 2016 Nissan Altima have its oil changed?
One of the most important and important services for your car is an oil change. Nissan advises changing the oil and filter in your 2016 Nissan Altima every 3,000 to 5,000 miles, but it’s important to consult your owner’s handbook and your dealer to determine the intervals that are ideal for your car.
Does the 2016 Nissan Altima need synthetic oil?
By changing my own oil, I’m attempting to reduce the expense of car maintenance. Simply said, I want to be sure I’m utilizing the proper supplies. What kind of oil is recommended for the 2016 Nissan Altima?
In less than two minutes, find out if your auto insurance is being overcharged.
The full synthetic oil used in the 2016 Nissan Altima has an SAE 0W-20 viscosity. You require roughly 4.9 quarts of oil in addition to a new filter, regardless of whether your Altima has a 4-cylinder or a V6 engine.
You’ll also need the following supplies to complete an oil change:
- towels or rags to clean up any spills
- Tools, such as a mallet and a wrench set
- security lenses
- oil filter seal
- a container into which the used oil is drained
- Funnel
- oil slick
Updating your insurance is another option to reduce your car expenses. You won’t need to make a lot of calls or fill out a ton of paperwork if you use the Jerry app. In less than two minutes, Jerry will find customised estimates on the coverage you need. On average, you may save more than $800 a year on insurance!
The best oil for a Nissan Altima is?
Response given by. The ideal motor oil for a Nissan Altima is synthetic 5W-30. Synthetic oil will improve the performance of your Nissan Altima.
Where is the 2016 Nissan Altima’s TPMS reset button?
There is a TPMS reset button, which you can press. The specific placement is specified in your owner’s manual, however it is typically found underneath the steering wheel. By placing your keys in the “on” position while keeping your engine off, you can operate this. When the TPMS light flashes three times, continue holding the button.
How can I tell if the wheels will fit my vehicle?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
How frequently should tires be rotated?
Vehicles with two rear wheels should also rotate regularly. The two most typical rotational patterns for six-wheeled vehicles are listed here. However, examine whether there is a suggested rotation schedule in your owner’s manual.
To ensure that all tires wear equally and last longer, each tire and wheel are taken from your car and transferred to a new location during rotation. Every six months or 6,000 to 8,000 miles, tires should be rotated. Please refer to the Tire Rotation & Replacement section on page 14 of the Michelin Owner’s Manual for more information on tire rotation.
WHEN DISMOUNTING THE TIRE FROM THE WHEEL IS NOT POSSIBLE, AN ALTERNATE ROTATION FOR THE DIRECTIONAL TIRE IS APPROPRIATE.
This website does not support the web browser you are using. As a result, some functionalities might not function as intended. Strange browsing behaviors could emerge from this. For optimal use of this website, upgrade or install one of the following browsers.
What is a wheel’s offset?
The distance between a wheel’s hub mounting surface and its center plane is known as the wheel offset. Positive offset indicates that the hub-mounting surface is situated nearer to the outside of the wheel. In contrast, a negative offset indicates that the object is moving inboard. If the mounting surface and the center plane of the wheel are parallel, then the offset is equal to zero. In other words, the lateral, or side to side, position of the wheel is determined by offset. The offset must be carefully chosen together with the new width as wheel widths vary to ensure that the wheel and tire have enough room inside the wheelwell to prevent friction or unwelcome contact with other parts.
Numerous wheel fitment problems can be resolved with the help of an understanding of wheel offset. Upsizing of wheels and tires frequently calls for different offsets. The handling of the car may suffer if the wheel offset is incorrect for the vehicle.
Don’t worry; Town Fair Tires’ comprehensive database enables our sales experts to recommend tires that are the ideal fit for your car.
A 5×114-3 bolt pattern is what?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).