Depending on the trim level you have, your 2010 Nissan Altima’s tire size will vary. Except for the 2.5 S model, which uses 215/55R17 tires, the 2.5 models will all utilize size 215/60R16 tires. The 3.5 SR Coupe used 235/45R18 tires, while the 3.5 SR Sedan had 215/55R17 tires. The tires on the hybrid version of this car were 215/60R16 in size. Again, the trim level will determine the wheel size for this car, which will range from 16 to 18 inches in diameter and 7-8 inches in width. All trim levels of this vehicle should have the front and rear wheels’ tire pressure set at 32 psi.
The 2010 Nissan Altima comes with 16-inch silver aluminum wheels as standard. The recommended tire pressure is 32 psi for the front tire and the rear tire. P215/60R16 for the front tires and P215/60R16 for the rear tires.
In This Article...
Size, Simplified: 215-60-16
Your 2010 Nissan Altima’s original tire size is P215/60R16 94H. Below is a color-coded description of the tire size for the 2010 Nissan Altima.
The tire size was made to accommodate wheels or rims with a 16-inch diameter.
With a load index of 94, this tire can support a load that weighs no more than 1474 pounds (670 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.
This figure indicates that the aspect ratio of your tire is 60%. In other words, 60% of the width is represented by the sidewall height of your tire, measured from the rim’s edge to the tread. The sidewall height in this instance comes out to be 129 millimeters.
This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.
The highest speed that may be maintained for 10 minutes on this tire is 130 mph (210 km/h), according to its speed rating of H. A faster pace becomes risky.
Which tire sizes are OK for a 2011 Nissan Altima?
Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
How big of a tire should I get for a Nissan Altima?
The majority of contemporary Nissan Altimas have tires with a diameter of 16 to 19 inches. Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
What tire pressure is recommended for a 2010 Nissan Altima?
No matter if you drive a Nissan Altima from 2010 or 2021, each tire will need 32 PSI. The condition of your tires and your safety while operating the car are both impacted by this number. This is because maintaining even tread and providing you with the maximum amount of stability depend greatly on having proper tire pressure.
No matter what anyone tells you, the amount of pressure you require is not based on the size of your tires. The weight of your car will determine how much air your tires need.
Pounds per square inch is referred to as PSI. It does not measure how much air is in the tire. As a result, even if a larger tire needs more air, the vehicle still needs the same pressure to maintain its weight.
Furthermore, the PSI advised for your specific vehicle is not represented by the number on the tire. The tire can withstand this pressure up to a point. Look inside your door to find the PSI that your car needs. This information will be written on a sticker.
What size wheels fit the Nissan Altima?
The tire sizes for the 2020 Nissan Altima are P235/40VR19, P215/60HR16, and P215/55VR17. The wheel (rim) sizes for the 2020 Nissan Altima are 19 X 8, 16 X 7, and 17 X 7.5.
Can Subaru wheels be used on a Nissan Altima?
The wheel will be further out the higher the offset, which is the opposite for a lower offset. The XV uses the same bolt pattern and offset as the Forester, which has been in use for more than 16 years, expanding your selection of wheels. A lot of owners replace the OEM wheels, so don’t rule out alloys for winter wheels. Another option for searching is Craigslist.
Additionally, I might advise changing your profile to add a more precise location in Canada, which will assist with future and current regional suggestions.
On a Nissan Altima, how do you reset the tire pressure indicator?
Turn the key to the “On” position with the car off, but don’t let it run. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the vehicle and let it run for 20 minutes to let the sensor reset.
What is a bolt pattern for a Nissan Altima?
We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
Why does tire size matter?
The sizes of motorcycle tires and automobile tires are often equivalent. The first three numerals indicate the millimeters of the tire’s width (mm). The aspect ratio, which is the height of the tire’s cross-section to its width, is represented by the next two numerals after the slash. The motorbike wheel’s diameter, measured in inches, is represented by the final two numerals following the dash.
How can you tell which wheels fit your car?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
Can wheels from one car be used on another?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
A 5 by 120 bolt pattern is what?
The bolt circle dimension (120), the notional circle determined by the studs’ centers, and the stud count (5) make up the 5×120 Bolt Pattern or Pitch Circle Diameter (PCD).
What is a wheel’s offset?
The distance between a wheel’s hub mounting surface and its center plane is known as the wheel offset. Positive offset indicates that the hub-mounting surface is situated nearer to the outside of the wheel. In contrast, a negative offset indicates that the object is moving inboard. If the mounting surface and the center plane of the wheel are parallel, then the offset is equal to zero. In other words, the lateral, or side to side, position of the wheel is determined by offset. The offset must be carefully chosen together with the new width as wheel widths vary to ensure that the wheel and tire have enough room inside the wheelwell to prevent friction or unwelcome contact with other parts.
Numerous wheel fitment problems can be resolved with the help of an understanding of wheel offset. Upsizing of wheels and tires frequently calls for different offsets. The handling of the car may suffer if the wheel offset is incorrect for the vehicle.
Don’t worry; Town Fair Tires’ comprehensive database enables our sales experts to recommend tires that are the ideal fit for your car.
40 PSI—is it too much?
For some vehicles with specs within this range, a pressure of 40 psi may be suitable. But for some other tires, this number can likewise be too high or too low.
For example, sports automobiles or passenger cars may be suitable with a pressure level of 40 psi. However, this is too low for heavy trucks and below the recommended pressure of 35 psi for small cars.
The recommended pressure range for tires on well-known sports cars and passenger vehicles is 32 to 40 psi. Depending on the type of vehicle, a specific index will be given. It should be noted that this level is suggested while the tire is cold, so after a lengthy trip, you must check it again to ensure proper adjustment.
There are many various car models available today, and each will utilize a different type of tire. Therefore, the manufacturer will decide in advance what pressure should be used in each of these tires.
It is your responsibility to maintain the best level for the car to run safely and smoothly. To find out whether or not this 40 psi pressure level is good for your car, you must first verify the tire specifications.