What Size Tire Does A 2017 Nissan Altima Have?

Tire size for the 2017 Nissan Altima SR is P235/45R18.

What are the tire size, pressure, and wheel size for a Nissan Altima?

The tires for the 2017 Nissan Altima are p215/60r16 on the front and rear. The Tire Pressure Monitoring System, often known as the TPMS, measures it at 32 to 35 psi. The Altima’s wheels are a standard 16 inches in diameter. These wheels have aluminum rims. Your tires will need to be replaced if you experience a flat tire or tire damage. The majority of vehicle stores charge between $87 and $348 per tire. You will have to pay an additional $40 to $218 for labor if you decide to have a professional mechanic or even a service technician do the modification.

The front and rear tires of the 2017 Nissan Altima should have 32 psi of pressure in them. The P215/60R16 front tire and the P215/60R16 rear tire sizes. The 2017 Nissan Altima comes with 16″ silver aluminum wheels as standard.

Size, Simplified: 215-60-16

Your 2017 Nissan Altima’s original tire size is P215/60R16 94T. Below is a color-coded description of the tire size for the 2017 Nissan Altima.

The tire size was made to accommodate wheels or rims with a 16-inch diameter.

With a load index of 94, this tire can support a load that weighs no more than 1474 pounds (670 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.

This figure indicates that the aspect ratio of your tire is 60%. In other words, 60% of the width is represented by the sidewall height of your tire, measured from the rim’s edge to the tread. The sidewall height in this instance comes out to be 129 millimeters.

This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.

The highest speed that may be maintained for 10 minutes on this tire is 118 mph (190 km/h), according to its speed rating of T. A faster pace becomes risky.

How big should my tires be for a 2017 Nissan Altima?

Depending on the year, model, and trim level of your Altima, the most popular tire sizes include 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires. Whatever tire size you have on your Altima, we have them available for you at the lowest cost available.

A 2009 Nissan Altima has what size tires?

Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.

What size tires come on a Nissan Altima in stock?

The majority of contemporary Nissan Altimas have tires with a diameter of 16 to 19 inches. Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.

What size wheels fit the Nissan Altima?

The tire sizes for the 2020 Nissan Altima are P235/40VR19, P215/60HR16, and P215/55VR17. The wheel (rim) sizes for the 2020 Nissan Altima are 19 X 8, 16 X 7, and 17 X 7.5.

The 2019 Nissan Altima will fit what size wheels?

Depending on the model year and trim level of your Nissan Altima, a choice of rim diameters, including 16″, 17″, 18″, and 19″, are commonly available.

What tire pressure is recommended for a 2017 Altima?

Are you concerned about your Nissan Altima’s tire pressure? Perhaps your low-pressure indicator lit up, but you are unsure of how much air your tires require. We looked into the matter, and the following is what we learned.

Tire pressure for your Nissan Altima should be 32 PSI. The majority of year models share the same number. Additionally, it is unaffected by the size of the tires.

You must understand how to check the levels now that you are aware of the recommended tire pressure. Continue reading to learn how to check the air in your tires, how often to check it, whether you can drive with low air pressure, and other topics.

Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!

On a 2017 Nissan Altima, how do you reset the tire pressure light?

Turn the key to the “On” position with the car off, but don’t let it run. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the vehicle and let it run for 20 minutes to let the sensor reset.

What is a bolt pattern for a Nissan Altima?

We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:

Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.

That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!

Why does tire size matter?

The sizes of motorcycle tires and automobile tires are often equivalent. The first three numerals indicate the millimeters of the tire’s width (mm). The aspect ratio, which is the height of the tire’s cross-section to its width, is represented by the next two numerals after the slash. The motorbike wheel’s diameter, measured in inches, is represented by the final two numerals following the dash.

On a Nissan Altima, where is the TPMS reset button located?

There is a TPMS reset button, which you can press. The specific placement is specified in your owner’s manual, however it is typically found underneath the steering wheel. By placing your keys in the “on” position while keeping your engine off, you can operate this. When the TPMS light flashes three times, continue holding the button.

How can I tell if the wheels will fit my vehicle?

The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.

Can wheels from one car be used on another?

Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.

By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.

What is a wheel’s offset?

The distance between a wheel’s hub mounting surface and its center plane is known as the wheel offset. Positive offset indicates that the hub-mounting surface is situated nearer to the outside of the wheel. In contrast, a negative offset indicates that the object is moving inboard. If the mounting surface and the center plane of the wheel are parallel, then the offset is equal to zero. In other words, the lateral, or side to side, position of the wheel is determined by offset. The offset must be carefully chosen together with the new width as wheel widths vary to ensure that the wheel and tire have enough room inside the wheelwell to prevent friction or unwelcome contact with other parts.

Numerous wheel fitment problems can be resolved with the help of an understanding of wheel offset. Upsizing of wheels and tires frequently calls for different offsets. The handling of the car may suffer if the wheel offset is incorrect for the vehicle.

Don’t worry; Town Fair Tires’ comprehensive database enables our sales experts to recommend tires that are the ideal fit for your car.

A 5×114-3 bolt pattern is what?

The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).

40 PSI—is it too much?

For some vehicles with specs within this range, a pressure of 40 psi may be suitable. But for some other tires, this number can likewise be too high or too low.

For example, sports automobiles or passenger cars may be suitable with a pressure level of 40 psi. However, this is too low for heavy trucks and below the recommended pressure of 35 psi for small cars.

The recommended pressure range for tires on well-known sports cars and passenger vehicles is 32 to 40 psi. Depending on the type of vehicle, a specific index will be given. It should be noted that this level is suggested while the tire is cold, so after a lengthy trip, you must check it again to ensure proper adjustment.

There are many various car models available today, and each will utilize a different type of tire. Therefore, the manufacturer will decide in advance what pressure should be used in each of these tires.

It is your responsibility to maintain the best level for the car to run safely and smoothly. To find out whether or not this 40 psi pressure level is good for your car, you must first verify the tire specifications.