Your 2008 Nissan Altima’s original tire size is P215/60R16 94T. Below is a color-coded description of the tire size for the 2008 Nissan Altima.
The tire size was made to accommodate wheels or rims with a 16-inch diameter.
With a load index of 94, this tire can support a load that weighs no more than 1474 pounds (670 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.
This figure indicates that the aspect ratio of your tire is 60%. In other words, 60% of the width is represented by the sidewall height of your tire, measured from the rim’s edge to the tread. The sidewall height in this instance comes out to be 129 millimeters.
This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.
The highest speed that may be maintained for 10 minutes on this tire is 118 mph (190 km/h), according to its speed rating of T. A faster pace becomes risky.
In This Article...
Size of Nissan Altima wheels
When you want to improve your Nissan Altima with an aftermarket option or replace the factory wheels, you can use the wheel size chart as a fitment guide. It assists in determining the potential stock and custom offset range, wheel width specifications, and the crucial Nissan Altima bolt pattern for proper installation.
We have divided the Nissan Altima wheels specifications by generation for your convenience. To discover the required year of production and to view the wheel size, scroll down the page.
Vital
Offset and rim width are the other two factors you should think about. So yeah, unless offset and rim width are some insane figure as opposed to oem specs you will have no issues with your new wheels. In most cases these 2 will only matter when it comes to appearance (how far wheels/tires protrude out, how deep or how flushed they are in a wheel well).
You might not get a response because this is an old thread, and you might be restarting an old thread. Consider starting a new thread, please.
What are the tire size, pressure, and wheel size for a Nissan Altima?
Tire size for the Coupe 2.5 S, Sedan 2.5, Sedan 2.5 S, Sedan 3.5 SL, and Sedan Hybrid models of the 2008 Nissan Altima is 215/60R16. Both the Coupe 3.5 SE and the Sedan 3.5 SE have 215/55R17 tires. The Altima’s front and rear 215/55R17 tires should be inflated to 33 psi, while the front and rear 215/60R16 tires should be inflated to 32 to 33 psi. The car features wheels that are 7 to 7.5 inches wide and 16 to 17 inches in diameter. The vehicle features a 5×114.3mm bolt pattern and an M12 X 1.25 thread size. Lug nuts are used as the wheel fasteners, and the center bore of the vehicle is 66.1 mm.
The 2008 Nissan Altima comes standard with 16-inch wheels. The 2008 Nissan Altima’s tire size is P215/60R16. The 2008 Nissan Altima’s recommended tire pressure is 32 psi.
Can Subaru wheels be used on a Nissan Altima?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one. By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size.
What size tire should I buy for my 2008 Nissan Altima?
Learn what tires and wheels fit the 2008 Nissan Altima. For information on wheel size, tire size, bolt pattern (PCD), rims offset, and tire pressure, see the tables below.
What is the Nissan Altima’s bolt pattern for 2008?
Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
What is the 2020 Nissan Altima’s wheel bolt pattern?
The stud count (five) and bolt circle dimension (114.3), the notional circle determined by the studs’ centers, make up the 5×114. 3 Bolt Pattern or Pitch Circle Diameter (PCD). Vehicles from Acura, Alpine, Aston Martin, BAIC, BYD, Baojun, and Changan all have the 5×114.3 bolt pattern.
How can I tell if the wheels will fit my vehicle?
The bolt circle dimension (120), the notional circle determined by the studs’ centers, and the stud count (5) make up the 5×120 Bolt Pattern or Pitch Circle Diameter (PCD). Vehicles from Acura, BMW, BMW Alpina, BYD, Bentley, Buick, and Cadillac all use the 5×120 bolt pattern.
What kinds of car wheels are interchangeable?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
On a 2008 Nissan Altima, how do you reset the low tire pressure indicator?
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
How can I determine if my wheels are 5×114-3?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
What models of automobiles fit 5×114-3 wheels?
The tire pressure sensors are powered by a battery, thus if the TPMS indicator is blinking, the battery might need to be changed. It might potentially point to a sensor-related issue. Where is the location of the tire pressure sensor? It is affixed to the inner portion of the rim from within the tire.
Is TPMS on the tire or rim?
No, they won’t fit, end of story. The wheel will be further out the higher the offset, which is the opposite for a lower offset. The Forester’s 16+ year old bolt design and offset are shared by the XV, giving you more alternatives for wheels.
A 5 by 120 bolt pattern is what?
The majority of contemporary Nissan Altimas have tires with a diameter of 16 to 19 inches. Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
A 5×114-3 bolt pattern is what?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Typically, the tire pressure monitor reset button sits under the steering wheel.
A 5×114 can it fit a 5×114 3?
Telephone number: 817-720-9549 5×4. 5 is another name for 3 mm. A bolt circle of 5×114.3% would denote a 5 lug design on a circle of 114.3mm in diameter (or 4.5″)
Why are my tires in good condition but my tire pressure sign is on?
When the air pressure within the tire lowers, your car’s tire pressure monitoring system (TPMS) will sound an alarm and notify the driver. This electrical technology links the monitor on the dashboard of the car with the sensor that is mounted on the rim to display whether the tires are adequately inflated or not.
Why are my tires in good condition but my tire pressure sign is blinking?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. But even if your tires are in good condition, you shouldn’t rely exclusively on the reading from the vehicle’s tire pressure monitoring system because there are a lot of things that might set the sensors off.