Vehicles from TOYOTA, NISSAN, ISUZU, MITSUBISHI, MAZDA, INFINITI, LEXUS, DODGE, HONDA, JEEP, CADILLAC, ACURA, and other manufacturers share the 6 X 5.5 bolt pattern. Below is a complete list of car brands and models.
On heavy-duty utility trailers and commercial trailers, it’s not uncommon to see wheels with a 6 X 5.5 bolt pattern. More info on the wheels of a trailer
In This Article...
Size of Nissan Xterra wheels
The Nissan Xterra wheel size chart is used as a fitment guide when upgrading the car with aftermarket parts or changing the factory wheels. It assists in determining the potential stock and custom offset range, wheel width specifications, and the crucial Nissan Xterra bolt pattern.
We have divided the Nissan Xterra wheel specifications by generation for your convenience. To discover the required year of production and to view the wheel size, scroll down the page.
Will Nissan Xterra wheels fit Nissan Titan rims?
No, they won’t since the hub size is inadequate in stock form. I’ve seen it done and almost did it myself, but it turned out to be too much work. You can make them bored by setting up a machine shop.
I admit that at first I didn’t think the Titan wheels would fit the 1st gen vehicles, but the specs show that the lug design and backspacing are identical. does not mention the size of the hub. I suppose you find out once they’re delivered to you. That’s awful.
What is the Nissan Xterra’s wheel bolt pattern?
We’ve produced in-depth articles about the Nissan Xterra and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Prior-model Nissan Xterras had a center bore of 3.95 inches (100.3mm), a bolt pattern of 6×5.5 inches (6×139.7mm), and six lug nuts with an M12 x 1.25 thread size that require 101 lb-ft of torque to secure.
Nissan Xterra models made after 2004 have a 6×4.5 (6×114.3mm) bolt pattern, a center bore of 2.6 inches (66.1mm), and six lug nuts with an M12 x 1.25 thread size that require 101 lb-ft of torque to secure.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
What is the Nissan Xterra’s bolt pattern for 2008?
The bolt pattern of the 2008 Nissan Xterra Off-Road 4WD is 6-114.3 mm. This indicates that there are 6 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the center of the lug across from it in order to obtain an accurate measurement of your six lug bolt pattern without the use of a bolt pattern tool.
How can I tell which wheels will fit?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
What do universal wheels do?
Wheels of the Uni-Lug kind can accommodate various bolt patterns. Wheels with multiple bolt patterns are referred to as “Dual Pattern” or “Multi-Lug” wheels.
What is the 2002 Nissan Xterra’s lug pattern?
The bolt pattern on the 2002 Nissan Xterra XE 4×4 V6 is 6-139.7 mm. This indicates that there are 6 lugs, and the circumference of the circle formed by the lugs is 139.7 mm, or 5.5 inches.
How can I determine if my wheels are 5×114-3?
The diameter of a hypothetical circle created by the centers of the wheel lugs is known as the bolt pattern or bolt circle. Bolt patterns might have four, five, six, seven, or eight lugs; however, tuner applications normally have four or five lugs. Bolt patterns may be referred to as both since bolt circles can be measured in both inches and millimeters (i.e. 5×114.3 mm is also referred to as 5×4.5). A bolt circle measuring 5×114.3 mm would denote a 5 lug design on a circle of 114.3 mm in diameter (or 4.5″).
Can I change the size of the wheels on my car?
Simply simply, the bigger the tire, the better the traction your car has. A tire’s width affects how much surface area it covers on the road. According to iSee Cars, your vehicle has more to grab onto due to the increased touch with the pavement, which improves handling and maneuverability.
Does tire size thus actually matter? Yes, to answer briefly. But is wheel size important? It varies.
Tires and wheels are two different concepts. The wheel arrangement includes tires. For instance, even though the rims on your car are a specific size, you can buy alternative tire sizes to fit them as long as the middle of the tire is the right size. Having said that, a car with larger rims will frequently be able to accommodate bigger tires than other cars.
What wheels have a bolt pattern of 5×114-3?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
5×115 wheels fit what?
Many fantastic cars, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs, and more, come with wheels with a 5×115 bolt pattern. 5×115 wheels may enhance the appearance of any vehicle, whether you’re driving a polished ride that exudes high-end elegance or a traditional American muscle car.
Can 5×114-3 bolts be used with 5×100?
As shown in the image, 5×114.3 would imply 5 lugs (or holes), and the circle’s diameter would be 114.3 mm. A 5×100 would contain 5 holes as well, but because of the circle’s 14.3 mm lower diameter, the two are incompatible.
Some wheels have 10 holes and are classified as 5×100/5×114.3. The first set of five is 5×100, while the second is 5×114.3. By making one wheel suitable for numerous more cars, this helps the wheel manufacturer save money.
What is the Toyota Tacoma’s lug pattern?
The wheel bolt pattern for vehicles with two-wheel drive and models from 2000 to 2020 is five lugs, 4.5 inches (114.3 mm) high, positive offset. A 4WD vehicle has a medium offset of 6 lugs, 5.5 inches, or 139.7 mm.
Although having this knowledge is crucial, it might not be sufficient to enable you to make the necessary adjustments when you wish to change the vehicle’s tires. Because of this, we are going to give you some additional information here. For even more accurate information, be sure to take the time to search for the model year or trim model on Vehicle History.
The 6×139 bolt pattern is what?
The stud count (six) and bolt circle measurement (139.7), the notional circle determined by the studs’ centers, make up the 6×139.7 Bolt Pattern or Pitch Circle Diameter (PCD).
The 5×115 bolt pattern is what?
The stud count (five) and bolt circle measurement (115), the notional circle determined by the studs’ centers, make up the 5×115 Bolt Pattern or Pitch Circle Diameter (PCD).
What is a bolt pattern with a 114.3?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
A 5×120 can it fit a 5×115?
To put 5×115 bolt pattern wheels on hubs with a 5×120 bolt pattern, a wheel adapter set is required. To give you extra room for wider tires and rims, they will space out your wheels by an inch.
Are 114.3 and 115 equivalent?
There is a real difference between 114.3 and 115; rounding is not the only explanation. Since 1 inch is precisely 25.4 mm, 4.5 inches are precisely 114.3 mm.
Yes, they are quite close together. When I changed the rear axle bearings on my 1974 Cuda’s 4.5 inch or 114.3 mm bolt pattern, I did learn this. I was looking for anything to press against on the wheel end of the axle and thought, “Why not try these old rotors with a 115 mm bolt pattern off the back of my 2010 Charger?” It did a terrific job of pressing the bearings on, but after I hadn’t checked the specifications, I wondered if they were truly the same. However, if you put the rotor on the hub and pay great attention, you may observe that there is a small discrepancy. I wouldn’t switch out the wheels since, in my opinion, the acorn nuts wouldn’t fit snugly.
Since 4.5″ is 4.5″ after all, I did use Ford rims on our 1992 GC and the same ones on my 1995 Intrepid. The offset wasn’t precisely correct, but it worked and didn’t rub.
You might not get a response because this is an old thread, and you might be restarting an old thread. Consider starting a new thread, please.