- Normal tire sizes for the Nissan Titan 5.6 (305 horsepower) are 245/75R17 or 265/70R18, and standard rim sizes are 7.5Jx17 ET30 or 8Jx18 ET25.
In This Article...
Size of a Nissan Titan wheel
When you want to improve your Nissan Titan with an aftermarket option or replace the factory wheels, you can use the wheel size table as a fitment guide. It assists in determining the potential stock and custom offset range, wheel width specifications, and the crucial Nissan Titan bolt pattern for proper installation.
We have organized the Nissan Titan wheel specifications by generation for your convenience. To discover the required year of production and to view the wheel size, scroll down the page.
Nissan Titan 3: 2004–2015 “Lifting Fit
Your suspension has been upgraded to a 3 level “With a raise kit, you can install bigger wheels and tires without worrying about rubbing or cutting. The most common combination for Nissan Titans from 2004 to 2015 is a set of 20×10-25 rims with 305/50R20 tires.
2014 Nissan Titan with 305/50R20 Toyo Open Country A/T III tires and 20×10 -25 Mayhem Warrior rims.
What is the Nissan Titan’s bolt pattern?
We’ve produced in-depth articles about the Nissan Titan and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
The Nissan Titan has a bolt pattern that is 6×5.5 inches (6×139.7mm) across, a center bore that measures 3.06 inches (77.8mm), and six lug nuts that have a thread size of M12 x 1.25 and require 98 lb-ft (133Nm) of torque to tighten.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
Which rims can be swapped out?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
What size tire can a stock Titan fit?
There are a ton of alternatives when upgrading to huge tires, which can be very confusing. The question we are trying to answer is not necessarily what size tire you can get away with, but rather what size tire you SHOULD fit without sacrificing on- and off-road performance. Your main focus should be on enhancing the capabilities while preserving or perhaps improving the Nissan Titan’s stunning appearance. What is the largest tire that can be mounted on a Nissan Titan?
The largest tire that can be mounted on a Nissan Titan is 275/65/20, or 34.1 inches in metric measurements. With this tire, you can get better ground clearance without having to deal with the trouble of making significant adjustments like shaving sheet metal or removing wheel arch liners.
With the aforementioned size, there won’t be any rubbing during reversing or full lock-to-lock. The 245/75/R17 tires that came on the Titan at launch appear a little tiny for the body size. In metric measurements, this is equivalent to a 31.5″, so enlarging the wheel arches will be a respectable improvement.
Is the bolt pattern the same on all Nissans?
Nissan vehicles come in a wide range of lug designs, from 4×3.94″ to 6×5.50″. You need to be aware of the lug pattern for your specific Nissan model if you plan to replace your wheels. A
You must first determine the lug pattern if your Nissan’s wheels are broken, scratched, or if you just want to exchange them for a new size.
A
Tundra or Titan, which is larger?
In terms of size, the Toyota Tundra and the Nissan Titan are comparable. The Titan measures 75.1 inches in height, 79.5 inches in width, and 228.2 inches in length. In comparison, the newly released Tundra is marginally larger, measuring 233.6 inches long, 80.2 inches wide, and 78 inches high.
When compared to truck beds, the Titan King CabA(r) S has a bed that is 20.8 inches deep and 78.7 inches long. The Tundra SR’s bed is shorter, measuring 77.6 inches.
6×5-5 wheels fit what?
The 6×139 7 bolt pattern is equivalent in size to a 6×5 5 bolt design, claims BB Wheels. These dimensions are frequently used interchangeably in the automotive industry, and in North America, this pattern is frequently referred to as a 6×5-5 bolt pattern.
The metric system’s measurement for 6×5.5 bolt patterns is “6×139 7”. It is useful to keep this in mind while going outside of the US or making an online purchase from a retailer that only accepts measurements in metric.
The industry standard bolt pattern for pickup trucks is 6×5-5. In actuality, Chevy has been manufacturing 1500 4×4 pickup trucks with the 6×5 5 bolt pattern since 1967.
Let’s say your car has this type of bolt arrangement. Given that many auto-parts retailers carry these bolt designs both online and in physical stores, finding a replacement wheel will be simple.
Is tundra preferable to Titan?
With a maximum towing capability of 10,200 pounds as opposed to the Titan’s maximum towing capacity of 9,310 pounds, the Tundra will therefore be marginally superior at hauling trailers. Finally, Toyota has added a 6-speed automatic transmission to the third-generation Tundra’s engine.
What trucks have a bolt pattern of 6×135?
Ford SUVs and trucks with 6×135 wheels include the F-150, Ford Expedition, Lincoln Mark LT, and Lincoln Navigator.
What vehicles have a bolt pattern of 6×5 5?
The Rodeo, Axiom, and Trooper are just a few Isuzu cars that frequently use 6×5. 5 bolt patterns. It’s likely that the wheels on your vintage Chevrolet Denali or two-wheel-drive C-2500 pickup have this bolt pattern.
What kind of lug pattern has the Toyota Tundra?
We’ve written in-depth articles about the Toyota Tundra and answered a lot of your questions about it. Today, we’ll discuss the knowledge you’ll need to choose the best new tires or rims for your Toyota. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Toyota Tundra models made after 2007 have a center bore of 4.33 inches (110.1 mm), a bolt pattern of 5×5.9 inches (5x150mm), and five lug nuts with a thread size of M14 x 1.5 that require 96.6 lb-ft (131Nm) of torque to tighten.
Toyota Tundras produced between 2000 and 2006 feature a center bore of 4.18 inches (106.1 mm), a bolt pattern of 6×5.5 inches (6×139.7mm), and six lug nuts with a thread size of M12 x 1.5 that require 83 lb-ft (113Nm) of torque to tighten.
Has the lug pattern been the same between Chevy and Toyota?
They might fit because they share the same lug pattern. Due to brake calipers, rim offset, backspacing, and other factors, you must still be certain.
Are the 6 lug bolt designs on Ford and Chevy the same?
Chevrolet 1/2 ton uses a 6×5 bolt pattern while Ford uses a 6×135 layout. The same wheel is used for each of these bolt patterns on Fuel’s website.
An example of a 6 lug Chevy might be.
The lug pattern of the Chevy Silverado 1500 is 6×139. 7. The wheel’s six lug bolts are arranged in a 139.7 mm-diameter circle. This is frequently referred to as a six-lug or six-bolt pattern.
The 6×139 bolt pattern is what?
The stud count (six) and bolt circle measurement (139.7), the notional circle determined by the studs’ centers, make up the 6×139.7 Bolt Pattern or Pitch Circle Diameter (PCD).
Is the bolt pattern for all six lugs the same?
Different bolt patterns exist. It’s possible that the pattern on two separate cars with the same number of lugs will differ. The majority of manufacturers, including Chevy, will employ the same bolt pattern for all of their vehicles or for each of their many vehicle classes.
How many distinct six lug patterns exist?
While it’s simple to convert bolt patterns from millimeters to inches if you’re attempting to determine the pattern of your wheels, it’s crucial to remember that bolt patterns are measured in millimeters. A 5×120 bolt pattern, for instance, designates 5 holes that are each 120mm in diameter.
Typically, 4-lug bolt designs are produced for compact and midsize vehicles. As one of the most used bolt patterns, they make it simpler to find aftermarket or customized wheels. There are five different 4-lug patterns: 4×98, 4×100, 4×108, 4×110, and 4×114.3.
Mid-size, normal, full-size, and luxury automobiles are frequently made with 5-lug bolt designs. Because it is by far the most typical layout, finding aftermarket wheels and lug nuts is simple. Among 5-lug patterns are the following: 5, 5, 100, 5, 108, 5, 10, 11, 2, and 114. 3, 5×115, 5×120, 5×120. 7, 5×127, 5×130, 5×135, 5×139. 7, 5×155, 5×165.1, 5×205, and 5×150.
For pickups, midsize SUVs, and full-size SUVs, 6-lug bolt designs are produced. The availability of 6-lug bolt designs makes it simple to find aftermarket wheels for your truck or SUV. There are six different 6-lug bolt patterns: 6×114.3, 6×115, 6×120, 6×127, 6×132, 6×135, and 6×139.7.
Midsize, medium, full-size, and luxury automobiles are frequently made using 8-lug bolt designs. It is simpler to find custom or aftermarket wheels because to the widespread use of 8-lug bolt designs. There are four different patterns that make up this bolt pattern: 8×165.1, 8×170, 8×180, and 8×200.