Zerex Blue 50/50 Antifreeze, 1 gallon.
In This Article...
SERPRESULT
Yellow CONCENTRATE AutoZone Antifreeze/Coolant Universal *5 Year/150K Mile Protection* 1 Gallon * SKU # 367 and Part # AXA0B3 (926)
Normally, you should have a coolant flush performed on your Nissan Versa every 30,000 miles or every two years.
O’Reilly 1 gallon of yellow antifreeze in concentrate; O’Reilly 1 gallon of yellow antifreeze in 50/50; Peak 50/50 antifreeze and coolant in a 1 gallon yellow container * PEAK
Additionally, you can schedule a visit online, and we’ll handle your coolant service for you.
What kind of coolant can I use in a 2012 Nissan Versa?
Prediluted 50/50 Long Life Engine Coolant and Antifreeze by AISIN for Nissan Versa 2012 (r). the hue blue. The Toyota, Lexus, and Scion family of automobiles receive special engineering attention while developing AISIN 50/50 Pre-Diluted SUPER LONG LIFE Antifreeze.
How do you fill a 2008 Nissan Versa with coolant?
- Locate and clean the coolant reservoir by going to the reservoir.
- Check Level: Check the level of the coolant.
- Add Coolant: Select the right kind of fluid and add it appropriately.
- Replace the cap on the coolant reservoir and tighten it.
How can I determine the Nissan Versa’s coolant level?
- Open your Nissan’s hood.
- While the car is cooling down, locate the coolant reservoir according to your owner’s handbook.
- When you’ve located it, carefully examine the coolant reservoir to spot the marks designating the upper and lower coolant levels.
Nissan, is it okay to blend blue and green coolant?
Nissan Green and Blue coolants can be used together, but be sure to first dilute Green in distilled water and then use. The mixture’s lifespan will be equal to that of green coolant, which is 4 years or 96,000 kilometers/60,000 miles, if you combine the coolants.
What kind of coolant should I use?
There are many various kinds of antifreeze, and it’s important to realize that no one type of antifreeze is appropriate for all makes and models. Use only the antifreeze that your car’s manufacturer recommends as a best practice.
Can Prestone antifreeze be used in a Nissan?
For use in Honda/Acura, Nissan/Infiniti, Hyundai/Kia, Subaru, Mazda, and Mitsubishi vehicles*, Prestone 50/50 Prediluted Antifreeze/Coolant has been carefully developed. The #1 Branded Engine Protection Prestone prevents corrosion from spreading, enhancing the performance and extending the lifespan of a vehicle’s cooling system. It works with ANY color antifreeze and is compatible with Asian-based POAT technology. Prestone Antifreeze/Coolant for Honda/Nissan Vehicles will not violate the warranty. When flushed and filled in accordance with the instructions of the vehicle manufacturer, Prestone offers protection for up to five years or 150,000 miles.
What happens if you fill your automobile with the incorrect coolant?
The performance of the car can be hampered if the wrong coolant is used or if several types are mixed together. Additionally, the radiator’s corrosion may worsen. It’s crucial to remember that color alone cannot accurately identify the type of coolant you should use. The radiator, water pump, radiator hoses, cylinder gasket, and other components can suffer corrosion and other issues as a result of using the incorrect coolant. Having a qualified auto mechanic handle your vehicle’s maintenance is the greatest method to guarantee that you obtain the right coolant.
How long is a mixed coolant vehicle safe to operate?
Chemical bonds between organic and inorganic materials make up hybrid coolant. A hybrid coolant typically contains silicates, nitrites, oxygen, and glycol as its chemical constituents. These substances boost a car’s gas emissions while enhancing engine efficiency.
Coolants cannot be mixed on your own. Physical mixing is just mixing two coolants together, whereas chemical mixing involves combining the right minerals in a closed environment.
However, hybrid coolants enable you to travel 30,000 miles or more in total. This distance is merely a guess. It still depends on how often you use the automobile and how well the engine is maintained.
Because healthy gas emissions are combined with engine performance efficiency, most auto owners favor hybrid coolants.
What is coolant in blue?
The only possible meaning of a blue engine coolant temperature signal is that your coolant, or antifreeze, is too cold. In fact, the temperature is so low that your radiator could become too cold, which would prevent your engine from starting since it would freeze up.
Is coolant color important?
Auto parts retailers will stock a variety of aftermarket brands of coolant in addition to the OE choices. There are versions available from businesses like Prestone, Pentafrost, Peak, and others that claim to work for particular brands or nations in general (the country a car is made in is typically a good predictor for which coolant type it takes).
Although many times these aftermarket choices are less expensive than OE, it is still wise to use genuine OE coolant made specifically for your vehicle.
The truth is that coolant type cannot be accurately determined by coolant color. OAT coolants, for instance, are often orange, yellow, red, or purple in color. Most HOAT coolants are orange and yellow in color. IAT coolant that is older is now green. Manufacturer-sold coolants, such as the blue coolant sold by Honda, can further complicate problems.
Because of this, you should follow the instructions on the bottle and not rely solely on the color you’re pouring. If the description on the container confuses you, look up the appropriate coolant in your owner’s manual.
But if you forget the procedure after a few years, none of this will assist. In order to be ready when your engine ultimately requires flushing a few years down the road, keep track of the coolant you used and when.
Why are coolants’ hues different?
If antifreeze is green, it was likely created using an outdated formula that makes use of a process known as inorganic additive technology. The formulation of green antifreeze has been modified specifically to assist stop the corrosion of metals in a vehicle’s cooling system. That older formula is typically intended for pre-2000 automobiles, which were constructed with more steel and copper components than contemporary automobiles. The majority of manufacturers advise replacing IAT antifreeze every three years or 36,000 miles. The removal of antifreeze from your cooling system is explained in this instruction.
Is it acceptable to mix blue and green coolant?
Let’s address the big question: Can you combine different brands? now that I’ve clarified what goes into coolants.
Yes, that is the response. Peak can be blended with Zerek or Prestone, but only if they are both the same chemical type of coolant. The ratio is less important, but the type and application must be compatible.
The simplest method to keep this in mind is to try to pair together like types: IAG with IAG, OAG with OAG, and HOAT with HOAT.
However, it’s qualified and depends on getting things to match as closely as you can, just like anything else. Combining various antifreeze or coolant brands may reduce their corrosive effects and endanger your engine.
There will be times when you won’t have an option but to use various coolant or antifreeze brands. as when you go to a hardware store or gas station and discover that the brand you typically buy is sold out.
The safest course of action in that case is to drain the old coolant and replace it with the safest coolant or antifreeze you can locate.
In a pinch, however, you can use the closest match, particularly if it’s temporary.