We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
In This Article...
A Nissan Altima from 2010 has what kind of bolt pattern?
The bolt pattern on the 2010 Nissan Altima Coupe 2.5 S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
Which bolts do a 2008 Nissan Altima 2.5 S have?
The bolt pattern of a 2008 Nissan Altima Coupe 2.5 S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
A Nissan Altima can fit what size wheels?
The tire sizes for the 2020 Nissan Altima are P235/40VR19, P215/60HR16, and P215/55VR17. The wheel (rim) sizes for the 2020 Nissan Altima are 19 X 8, 16 X 7, and 17 X 7.5.
Can Subaru wheels be used on a Nissan Altima?
The wheel will be further out the higher the offset, which is the opposite for a lower offset. The XV uses the same bolt pattern and offset as the Forester, which has been in use for more than 16 years, expanding your selection of wheels. A lot of owners replace the OEM wheels, so don’t rule out alloys for winter wheels. Another option for searching is Craigslist.
Additionally, I might advise changing your profile to add a more precise location in Canada, which will assist with future and current regional suggestions.
How big of a tire can I put on a 2009 Nissan Altima?
Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
On what size of a Nissan Altima can you place tires?
The majority of contemporary Nissan Altimas have tires with a diameter of 16 to 19 inches. Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
A 5 by 120 bolt pattern is what?
The bolt circle dimension (120), the notional circle determined by the studs’ centers, and the stud count (5) make up the 5×120 Bolt Pattern or Pitch Circle Diameter (PCD).
A 5×114-3 bolt pattern is what?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
How can I determine if my wheels are 5×114-3?
The diameter of a hypothetical circle created by the centers of the wheel lugs is known as the bolt pattern or bolt circle. Bolt patterns might have four, five, six, seven, or eight lugs; however, tuner applications normally have four or five lugs. Bolt patterns may be referred to as both since bolt circles can be measured in both inches and millimeters (i.e. 5×114.3 mm is also referred to as 5×4.5). A bolt circle measuring 5×114.3 mm would denote a 5 lug design on a circle of 114.3 mm in diameter (or 4.5″).