All Nissan Altimas have had a 5×114.3, often known as a 5×4. 5, bolt pattern since 2002.
In This Article...
2015 Nissan Altima V 2.5i
The 2015 Nissan Altima V 2.5i comes standard with 7Jx16 ET50 rims and 215/60 R16 94T tires. What is:
- rim width in inches, 7J;
- 16″ — rubber diameter fitting in inches;
- ET50 is the disk’s offset in millimeters.
The 215/60 R16 vehicle tire marks are interpreted as follows:
- 215 — PROFILE width, measured in millimeters (cross section of the tire);
- 60 is the profile’s height as a proportion of its breadth;
- R: The cord’s radial wrapping;
- Tyre diameter in inches is 16.
Rubber can also be used to apply information about its load index and speed index, which measure its carrying capacity and speed parameters, respectively. The speed index is represented by Latin characters, such as 94T, while the load index is a two- or three-digit integer.
- 94 — 670 kg is the maximum weight the tire is permitted to support;
- T – the 190 km/h top speed limit for motor vehicles.
Utilizing the suggested tire sizes will aid in avoiding issues with driving control, safety, and other challenges. Which atypical sizes can be fitted? For possible alternate sizes for tuning, please see the chart above. Even so, the table may not include all of the available choices. For instance, discs with a larger diameter than themselves. Or, you might use wheels that are the same width but larger in diameter, which is a common choice among car owners. There is a vast selection of disks available; you can discover duplicates with the same specifications but an offset size of 1-2 millimeters more or less. There are too many alternatives to list them all.
The bolt pattern in this instance is 5×114.3, which is the same for all types of wheels. The five bolts that hold each disc in place are spaced exactly 114 points and 30 hundredths of a millimeter apart. diameter of a car hub, 66.1 mm.
What is the Nissan Altima’s bolt pattern for 2014?
The bolt pattern on the 2014 Nissan Altima Sedan 2.5 S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
What is the Nissan Altima’s bolt pattern?
We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
A 2015 Nissan Altima has what kind of lug pattern?
The bolt pattern on the 2015 Nissan Altima Sedan 2.5 S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
A 2012 Nissan Altima has what kind of lug pattern?
The bolt pattern on the 2012 Nissan Altima Coupe 2.5 S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
A Nissan Altima can fit what size wheels?
The tire sizes for the 2020 Nissan Altima are P235/40VR19, P215/60HR16, and P215/55VR17. The wheel (rim) sizes for the 2020 Nissan Altima are 19 X 8, 16 X 7, and 17 X 7.5.
What kind of tires are on a Nissan Altima?
The majority of contemporary Nissan Altimas have tires with a diameter of 16 to 19 inches. Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
What size tires can be put on a Nissan Altima?
Size of Tires The Nissan Altima provides three alternative tire sizes: the base P215/60HR16, the optional P215/55VR17, and the optional P235/40VR19. In addition, the tire measurements appear to be a mysterious puzzle that you must solve.
A 5 by 120 bolt pattern is what?
The bolt circle dimension (120), the notional circle determined by the studs’ centers, and the stud count (5) make up the 5×120 Bolt Pattern or Pitch Circle Diameter (PCD).
A 5×114-3 bolt pattern is what?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
What automobiles use the 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.