To resolve a stop lamp switch issue, Nissan is voluntarily recalling certain 2016–2019 Sentra (B17) models. The switch for the stop lamp on the…
In This Article...
Recalled Nissan Sentra vehicles have defective brake light switches.
The brake light switches on Nissan Sentra automobiles are being recalled because they can be greasy and broken.
Documents related to recalls indicate that contamination may cause the circuit to close, leading to a problem with the brake lights. The Nissan Sentra vehicles may not start if the brake light switch is malfunctioning.
The following is stated in the documents:
“As a result of silicon-based grease used in nearby components (such as the HVAC unit and the brake booster clevis pin), the stop lamp switch may become contaminated. Electric arcing may cause oxidation at the switch contact surface, leading to the accumulation of silicon dioxide. An inoperable stop lamp switch and open circuit problems could result from this buildup.”
Only Nissan and Infiniti models have the clevis pin and brake light switch so close together.
The external brake lights could stop functioning if the brake warning lights are activated.
As a result, the Nissan Sentra driver may not always signal when they want to brake.
Although real repairs might not be available until the fall of 2021, recall notices will start to be mailed out as early as April 7. This will leave Nissan Sentra drivers without critical safety fixes for the brake light switch issues.
Your Nissan Sentra may be defective if the brake light switch consistently gives you trouble and Nissan dealerships or authorized repair facilities were unable to resolve the problem after making a fair number of repair efforts. You can obtain monetary compensation, a replacement car, or a lemon law buyback with the aid of an accomplished California lemon law attorney. Find out more about the California Lemon Law and how recalls affect situations using the law.
Fill out the form below or call our lemon law office at 877-222-2222 if you have any additional inquiries concerning your Nissan Sentra, the brake light switch issue, or the California Lemon Law.
Nissan recalls the Sentra because the brake lights could go out.
New brake light switches and safety components will be installed in more than 800,000 vehicles.
shares of the news story
Nissan Sentra cars from the 2016 to 2019 model years are subject to a recall because the grease used in other surrounding components may contaminate the back brake lights, rendering them inoperable.
The manufacturer issues a warning that the engine might not start, the brake lights might not illuminate, or the client might see a malfunction indicator light on.
A silicone-based grease that is applied to other components is the source of the issue. This grease may off-gas chemicals into the environment, which could cause a buildup of residue on the switch’s surface. The electrical circuit won’t be able to close because of this residue, making the brake lights useless.
Involved in this recall are 807,376 Sentras. New parts are anticipated to be ready by the fall of 2021, and owners will be notified via mail in early April.
According to a Nissan spokeswoman, the firm is not aware of any accidents that could be linked to this issue.
SERPRESULT
For Sentra models from 2016 to 2019, replace the stop lamp switch.
The FAE Stop Light Switch is a perfect aftermarket upgrade that is made to fit, look, and function to OE standards or better.
An important part of your Nissan Sentra, the brake light switch activates your brake lights when you depress the brake pedal.
The Brake Light Switch assists in turning on your brake lights whenever you depress the brake pedal.
On a Nissan Sentra, where is the switch for the brake lights?
The 2020 Nissan Sentra Can Fit This. The Brake Light Switch turns on your brake lights whenever you depress the brake pedal. This part, which is normally found above the pedal and under the dashboard, is crucial to the Nissan braking system.
Why does my Nissan Sentra’s brake light come on?
Bad Switch: A faulty or failed switch is a typical cause of the Parking Brake light remaining on. You may quickly verify this by jiggling the handle once it has been lowered. The switch is most likely to be the problem and needs to be replaced if the light goes out (or goes out and comes back on).
If the brake handle is not fully down, there is another factor that could cause the light to remain on. Verify again that the parking brake is released and that the handle is fully lowered. The light will remain on if the parking brake cable is under any stress.
Parking Brake Not Disengaging: Occasionally, the parking brake itself is the source of the issue rather than the switch or the wires. The dash warning light will remain on if the brake does not release when the handle is dropped.
Low Brake Fluid: Your Parking Brake light is a multipurpose device that is intended to turn on when the reservoir’s fluid level falls below a specific level. As the fluid level fluctuates, you might see the light turning on or off when making turns.
The brake fluid level sensor in your master cylinder is malfunctioning. It is sometimes integrated into the reservoir cap, and other times it is positioned on the side of the sensor. The Parking Brake light will come on if the sensor malfunctions or becomes faulty.
Uneven Fluid Pressure: If your automobile has uneven brake fluid pressure in one or more lines, it may influence how well it can stop and may even cause it to pull to one side or the other. The parking brake light in your dash can also be activated by it.
A stop lamp switch: what is it?
Stop Lamp Switch refers to the switch that signals the ECM when the brake pedal is pushed and turns on the brake lights. The ECM also uses this data to operate the cruise control and BOS systems.
Where is the switch for the stop lamp located?
severe, since it’s in your best interest to make sure the automobiles in traffic behind you are alerted to your slowing down. Additionally, your cruise control won’t operate properly if your brake light switch is damaged. A faulty switch won’t cause the cruise control to turn off if the brake lights come on. Fortunately, this is a fairly simple, anxiety-free repair.
The switch is conveniently placed just next to the brake pedal, next to the ball of your right foot. It’s possible that the switch can be installed without using any tools at all. Most autos should have labor costs of $20 to $50. The lower dashboard of some luxury vehicles might need to be disassembled, which could cost $100 or more.
Are stop lights and brake lights the same thing?
The AUTO Stop Lamp is an intelligent brake light that offers additional security for you, your important cargo, and your car. The term “AUTO” has two definitions: (1) It refers to a brake light for AUTOmobiles; and (2) It automatically turns on as a vehicle slows down (patent pending).
Benefits: Reduces your risk of being hit from behind; gives you an earlier automated warning when your car is slowing down; and operates even if you don’t engage the brakes in the event of downshifting, vehicle trouble, obstructions on the road, and collisions. • Simple to install for anyone – a direct replacement for the current bulb
Features: • Uses LEDs, which offer a longer lifespan than conventional incandescent bulbs; • Increases vehicle longevity; • Applies to the majority of passenger vehicles (motorcycles, cars, pickup trucks, minivans, and SUVs); Note: According to a 2012 Polk study, the average age of cars and light trucks on American roads hit a record 10.8 years. • Required for driving techniques that involve downshifting rather than braking, such as those used by motorcycles and sports cars
How It Works: Pass-through circuitry ensures that the brake light functions as any other brake light, but the “smart” sensing and self-illumination increase safety. On-board energy storage is charged when the vehicle operator applies the brakes. On-board energy storage illuminates the LEDs when deceleration exceeds a pre-defined threshold value.
The development stage of the AUTO Stop Lamp is now underway. To complete the design and begin production, MECHoptix will start looking for investors in the fall of 2013.
What do brake lights do?
Almost every automobile, truck, and SUV includes a set of warning lights on the dashboard’s instrument panel. One of them is a brake system warning light that flashes and alerts you when your brake system is experiencing a problem.
You wouldn’t purposefully operate a vehicle without brakes, yet some motorists do almost the same thing by disobeying the brake warning light on their dashboard. Any fault with the brake system must be considered a serious safety concern, and your automobile shouldn’t be driven until the issue has been fixed by a professional.
Is the Nissan Sentra subject to a recall?
Because the right headlights on roughly 5,500 Sentra sedans from the 2020 model year may be pointed too high to let drivers see the road clearly, Nissan has ordered their recall. Typically, a poorly directed headlamp can be fixed by even relatively proficient home mechanics.
Is AutoZone a brake light switch replacement shop?
Problems with the brake light switch or turn signals A replacement switch can be placed after checking the connection to the switch for corrosion or damage and buying it from your nearby AutoZone.
What is the name of the top brake light?
America has required that all automobiles have a center brake lamp, sometimes known as a third brake light, that is situated above the left and right brake lights, as of 1986. A distracted driver is more likely to slow down the automobile if the car in front of him has a third brake light installed, according to a study. The third brake light, which is also known as a safety brake lamp or a high-level brake bulb, alerts other drivers when you apply the brakes. When other cars block their view of the left and right brake lights, it is helpful.
There is one more benefit to its existence. In our nation, red light from turn signals is permitted. Additionally, it may cause other drivers to become confused. However, adding a third brake light makes it much easier for them to see the location of the vehicle in front of them, especially at night.
Depending on the car, the third brake light is located in a varied location. It is typically fitted into the back glass of the car. It can be found in the deck lid of the vehicle. On some trucks, the spare wheel carrier may house the third brake light.
How can a stop light be checked?
Place the floor brush or mop’s one end on the brake pedal. Alternately, you can press the brake pedal with whatever you are now using. Until the brake is engaged, depress the pedal, then lock it in position so that it stays depressed. Check the lights as you circle the back of your vehicle.
The brake light belongs to which tail light.
Many automobiles have a single globe that houses both the braking and tail lights. In other words, both lights have the same external covering. Your car’s may be a little different, with individual globes. In contrast to brake lights, which turn on instantly when you hit the brakes, tail lights are activated by turning on your headlights or applying the parking brake. The brake lights are a brighter red than the tail lights, which are typically red on cars. White back-up lights are also included in your rear lights.