The Maintenance Tire Light: What Does It Mean? When your Nissan’s tire maintenance light comes on, it’s time to rotate the tires as part of your normal maintenance program. (This warning light has nothing to do with tire pressure.) Fortunately, there is no need to be alarmed by the tire maintenance light.
In This Article...
Model Years 2009-2014 (A35)
Through the cluster menu, you may access the tire maintenance reset. This is how you do it:
Without starting the engine, turn the ignition key to the ON position.
Press the “Start” button twice without using the brake pedal if your car has a Smart key button.
- Once you get the “SETTING” screen, press the button.
- By pressing the button, navigate to the MAINTENANCE menu.
- Choose TIRE
- In this menu, you can RESET the existing reminder or set a new one to go off at a certain time.
Why does my Nissan Altima have a maintenance tire?
When your tires require maintenance, the “maintenance tire” light on the Nissan Altima will turn on. Uneven wear may be caused by the wheel alignment or by an overinflated tire. For proper tire wear, you must rotate the tires every 7500 miles because uneven wear will force you to replace the tires earlier than necessary. The typical tire lifespan is around 50,000 miles, however this depends on how well you take care of them. Go through the Maintenance, Tire, and Reset settings in the menu to reset this light. You can do this by choosing the buttons on the dashboard that are on the left side, behind the steering wheel.
If your Nissan Altima’s tire maintenance light illuminates, your tires require care. Uneven wear may be caused by under- or over-inflation or by improper wheel alignment.
Re: Service Tire – Why does this matter?
When your tires require repair, a “maintenance tire” warning light will appear on the vehicle. Uneven wear may be caused by the wheel alignment or by an overinflated tire. For proper tire wear, you must rotate the tires every 7500 miles because uneven wear will force you to replace the tires earlier than necessary. You can learn how to reset the warning by reading this page.
Fix for your Nissan car’s “Maintenance: Tire” alert
The warning “Maintenance: Tire” may occasionally appear on your dash screen. This warning may appear, in particular, on Nissan Altima, Nissan Rogue, and Leaf vehicles. You will be confused after seeing this type of notice or instruction in your car’s display. When your tires require repair, the “maintenance tire” warning light will turn on.
Solving Techniques
When the customer-set distance for tire replacement arrives, the tire maintenance notice will appear. Uneven wear may be caused by the wheel alignment or by an overinflated tire. For proper tire wear, you must rotate the tires every 7500 miles because uneven wear will force you to replace the tires earlier than necessary. On average, tires will last for 50,000 miles, but this will depend on how well you care for them. You can do this by choosing the buttons on the dashboard that are on the left side, behind the steering wheel.
A reset or reminder can be set for a particular distance. You must adhere to the instructions in your car’s manual; if you can’t find it, use the Nissan website for the manual’s pdf version. Additionally, you will receive directions from there on how to change a tire from one portion to another, how many decreases your tire has experienced, and other things.
There are numerous ways to put this message on your vehicle. It will alert you to the notice “Maintenance: Tire” if your back tire is more damaged than your front tire. Therefore, the most effective approach is to simply switch the tires from one portion to another part. You can get a replacement Nissan tire from Amazon if you see that your tire is seriously damaged.
You can see a video of how to change a Nissan tire here:
How can you turn a Nissan Maxima’s maintenance light back on?
Turn the key to the “On” position with the car off, but don’t let it run. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the vehicle and let it run for 20 minutes to let the sensor reset.
What does the Nissan Maxima’s service engine soon message mean?
When the check engine light on your Nissan Maxima starts to flash, it indicates an urgent need for repair, therefore you should take your Nissan in right away. Usually, a serious engine misfire that causes unburned fuel to leak into the exhaust system is indicated by this blinking light.
The meaning of the tire maintenance light.
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, lower fuel economy, excessive heat buildup, and tire overload. The shoulders or tread edges of a tire that is underinflated will prematurely wear out on both sides.
Finding the TPMS indicator on your dashboard is straightforward if this is your first time hearing about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
Does tire rotation cause the maintenance light to illuminate?
How to reset or turn off the maintenance light is one of the queries we receive frequently. While many new cars utilize synthetic oil, which only has to be changed every 10,000 miles, the maintenance light on a newer model Toyota turns on every 5,000 miles to remind you to get an oil change and rotate your tires. Therefore, a better-safe-than-sorry reminder light illuminates every 5,000 miles. Since traveling to the dealership to have the light reset by a technician may be inconvenient, we wanted to teach how to reset this light in the comfort of your own driveway. Keep in mind that the light also flashes to alert you to rotate your tires every 5,000 miles.
Your Maintenance Required Light Can Be Reset By:
- While the odometer is set to “Regular Total Mileage,” not “Trip A” or “Trip B,” turn off your engine.
- Turn the key to the “on” position while pressing and holding the mileage reset button.
- When the odometer digits have all reached zero, the maintenance light will have reset, and you can release the button.
We anticipate that these instructions will enable you to reset this light if you so choose. Please do not hesitate to call or visit Heritage Toyota Scion if you are uncomfortable performing this or are unsure of why your maintenance light has come on.
How long will a low-pressure tire last?
A 50-mile drive at a top speed of 50 mph is conceivable in the event of complete pressure loss and limited mobility (no unexpected driving maneuvers). The type of driving, speed, type of road, weather, tire condition, and vehicle load will all have an impact on the run flat distance.
How can I determine which tire needs air?
You must re-inflate the tires if the pressure inside them is less than the recommended level. For instance, the doorjamb label can specify that 32 psi, or pounds per square inch, is the ideal amount. You check your tire and see that the pressure is 29 psi. You must raise the tire pressure to the recommended level.
What does it imply when the maintenance needed light on your car illuminates?
Other automakers don’t offer a dashboard light like the maintenance required light, which is present on Toyota automobiles (MAINT REQD). Many new Toyota drivers could mistakenly believe that this light is the check engine light, but it actually represents a completely different warning. According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary.
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
Why, Toyota, does my tire pressure light remain on even after filling the tires?
Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light should not be on because the tire sensors should have been reset.
When is it not advisable to rotate your tires?
The most frequent reason why a tire shop will decline to rotate your tires is if one or more of them don’t have enough tread depth to keep you safe.
Some car owners erroneously think that the tire is secure if the wear bar in the space between the tread lugs hasn’t yet been reached. You reach the wear bars when there is barely 2/32″ of tread left. Actually, this is the moment at which you shouldn’t use the tires at all.
Tires should be replaced when they have 4/32″ of tread remaining, or twice the height of the wear bar. At least 10/32″ of tread will be worn out on brand-new tires.
Before their tread depth runs out, tires don’t function perfectly. As they deteriorate, they become less able to shed water, and in slippery conditions, they gradually lose their hold. As soon as they have 4/32″ of tread, hydroplaning becomes a serious worry because there is very little depth remaining for water to be shed.
Due to safety concerns, some tire shops won’t rotate tires at 4/32″ or won’t rotate a tire with this low tread depth to the back.
Where is the location of the tire pressure sensor?
Where is the location of the tire pressure sensor? It is affixed to the interior of the rim from inside the tire. The tire pressure sensor is a little cylinder that you can see if you take the tire off the rim.
Are new tire pressure sensors required?
The sensors used in tire pressure monitoring systems are attached to the wheels or the valve stems, and they can become worn down over time or be harmed by debris, the elements, or potholes. Additionally, TPMS electronics are susceptible to failure. When the sensors or other components of the system aren’t working properly, the TPMS warning light is meant to flash; if the light is indicating that a tire needs more air, it should just stay on. If a warning light or message appears, consult your owner’s manual to see what it signifies.
The sensors send radio signals to a control unit, and occasionally other radio transmissions using the same frequency interfere with the TPMS signals, resulting in a malfunction notice.
After changing or installing new tires or wheels, the majority of tire stores and repair facilities advise servicing the TPMS by changing the valve core, retaining nut, seal, and valve stem cap, followed by testing the system to ensure it is functioning properly. The TPMS on many vehicles needs to be electronically reset following a tire change or replacement. On others, if the sensors are working properly, a few miles of driving will automatically reset the system.
There are two varieties of TPMS: direct and indirect. The more advanced direct type monitors each tire’s air pressure (including the spare tire on some models) and indicates which tire is low on air on the dashboard display. There are numerous direct technologies that can show the actual tire pressure.
The indirect kind measures wheel speed using antilock brake sensors. The warning light will turn on because an underinflated tire will rotate the wheel more quickly than one that is completely inflated. If a sensor detects an issue, you must inspect every tire because indirect systems typically don’t indicate which tire is underinflated.
Because tire pressure frequently decreases as the temperature rises, cold weather might set off a warning light on either type of system. After the car has been driven a while and the tire pressure has risen, the warning light can turn off.
Because the sealant kits could harm the TPMS sensors, some manufacturers advise against using them to fix flat tires. A tire pressure gauge should be used to monitor tire pressure at least once each month, according to tire specialists. In comparison to fully inflated tires, underinflated tires have a shorter lifespan, less traction, and a reduced capacity for carrying loads. Additionally, low tire pressure might decrease fuel efficiency. Even though a TPMS light should alert you to any issues, it is always a good idea to perform manual checks in case the tire pressure sensors are not working properly.