and later, 2009 To prevent seals from deteriorating and developing leaks, Nissan automobiles require an ethanol phosphate-based OAT engine coolant that is devoid of silicate, borate, nitrite, and amine. Blue coolant is Nissan OEM and “Asian” coolant. A suitable blue coolant in concentrate and 50/50 is produced by Recochem OEM. The 50/50 split is for uncomplicated radiator drain and filling and top-off. Because some water will remain in the system after a flush and fill (repeated distilled water fills and drains), concentrate is perfect for this. After flushing, add concentrate at 50% of the coolant volume (and optional water wetter, like those from Red Line or Royal Purple), then fill the cooling system to the top with distilled water to ensure a 50/50 mix.
In This Article...
SERPRESULT
One gallon of Prestone Antifreeze/Coolant Universal CONCENTRATE with 10-year/300,000-mile protection (576)
Older coolants don’t last as long as newer ones, which use Organic Acid Technology (OAT).
Typically, ethylene glycol and water are split 50/50 in liquid coolants.
Peak 1 gallon Yellow 50/50 Antifreeze; Coolant for the 2011 Nissan Juke * PEAK50/50LL * 4; Vehicle Specific.
Typically, liquid coolants contain ethylene glycol and water in equal amounts.
When should a Nissan Juke have its coolant changed?
How frequently should a 2017 Nissan Juke have its coolant changed? Typically, your 2017 Nissan Juke’s coolant flush should be completed every 30,000 miles or every two years.
Nissan coolant is what color?
Nissan Green Coolant requires replacement every four years or 96,000 kilometers, which is a shorter service frequency than Nissan Blue (60,000 miles). Nissan Green coolant has the component number 999MP-AF000P (Concentrate), and it is available in concentrated form.
Why is my Nissan Juke getting too hot?
The radiator fan, a broken thermostat, or a coolant leak (from the water pump, radiator, hose, etc.) are the most frequent causes of overheating in Nissan Jukes. fluid leak (water pump, radiator, hose etc.)
What type of coolant should I use in my car?
There are many various kinds of antifreeze, and it’s important to realize that no one type of antifreeze is appropriate for all makes and models. Use only the antifreeze that your car’s manufacturer recommends as a best practice.
Nissan uses blue antifreeze, right?
Subaru Blue The business then began using the blue coolant in all of their vehicles. Nissan’s Blue Coolant is designed to endure for a lot longer. Although it is recommended to replace the coolant after seven years of operation or 105,000 miles, this coolant should last at least ten years or 135,000 miles.
Is using universal coolant acceptable?
When topping off or refilling your cooling system, what kind of coolant should you use? Use the same kind of antifreeze that the car maker recommends if your vehicle is still covered by warranty, which includes extended powertrain warranties.
That would be Dex-Cool or an antifreeze that complies with GM6277M, ASTM D3306, SAE J1034, J814 and J1941 for General Motors cars.
It would be antifreeze that complies with Ford WSS-M97B51-A1 specifications if you drive a Ford.
It would be Chrysler antifreeze that complies with Chrysler MS9769 specifications for a GO-5 or HOAT (Hybrid Organic Acid Technology) type of coolant if you drive a 2001 or newer Chrysler.
To find out what kind of coolant is recommended for your car, consult your owner’s manual.
When your car’s warranty has expired, you can either continue using the antifreeze that was installed in the cooling system when it was new, or you can switch to a universal or global coolant that works with all makes and models.
Given the variety of antifreeze specifications we just discussed, the name “Universal Coolant” seems to be incongruous. However, universal coolants are designed to combine with almost any coolant. According to the manufacturers of these products, antifreeze can be used in any year, make, or model of car without risk.
What happens if I fill my automobile with the wrong coolant?
The performance of the car can be hampered if the wrong coolant is used or if several types are mixed together. Additionally, the radiator’s corrosion may worsen. It’s crucial to remember that color alone cannot accurately identify the type of coolant you should use. The radiator, water pump, radiator hoses, cylinder gasket, and other components can suffer corrosion and other issues as a result of using the incorrect coolant. Having a qualified auto mechanic handle your vehicle’s maintenance is the greatest method to guarantee that you obtain the right coolant.
Can you mix different coolant colors?
Mixing two distinct antifreeze colors or types is never a smart idea. While combining two recipes won’t result in any explosive or harmful reactions, it may cause your coolant to become a sluggish chemical brew that won’t be able to pass through your cooling system as intended. In order to function properly, coolant must be fluid, and a thick coolant could block the cooling systems and cause other potential problems in the engine of your car. The final word? Don’t combine antifreeze in different colors.
As we work to improve site experiences for browsers that embrace new web standards and security procedures, we are no longer supporting Internet Explorer (IE).
Is coolant color important?
Auto parts retailers will stock a variety of aftermarket brands of coolant in addition to the OE choices. There are versions available from businesses like Prestone, Pentafrost, Peak, and others that claim to work for particular brands or nations in general (the country a car is made in is typically a good predictor for which coolant type it takes).
Although many times these aftermarket choices are less expensive than OE, it is still wise to use genuine OE coolant made specifically for your vehicle.
The truth is that coolant type cannot be accurately determined by coolant color. OAT coolants, for instance, are often orange, yellow, red, or purple in color. Most HOAT coolants are orange and yellow in color. IAT coolant that is older is now green. Manufacturer-sold coolants, such as the blue coolant sold by Honda, can further complicate problems.
Because of this, you should follow the instructions on the bottle and not rely solely on the color you’re pouring. If the description on the container confuses you, look up the appropriate coolant in your owner’s manual.
But if you forget the procedure after a few years, none of this will assist. In order to be ready when your engine ultimately requires flushing a few years down the road, keep track of the coolant you used and when.
Can I add more coolant on my own?
It’s easy to top off the coolant in your engine by opening the reservoir cap; just make sure the engine isn’t running too hot and open the cap with a cloth wrapped around it in case there’s any trapped pressure. What you use to do this, though, is crucial.
- Use a quality engine coolant that you can purchase at an autocenter or local dealer. Simply adding water is not advised since any minute organisms or impurities could accumulate inside your engine and cause the coolant pipes to ‘fur’ up, thereby obstructing the internal waterways. If that’s all you have, it’s still preferable to use ordinary water rather than letting your coolant level get too low.
- Using distilled water instead of store-bought coolant is an option. Since this has been cleaned, it is free of the impurities that can harm your pipes.
Are blue coolants uniformly the same?
Although they are frequently used interchangeably, coolant and antifreeze are not nearly the same thing. Ethylene glycol is the primary chemical in the mixture that makes up antifreeze, according to Bumper. Meanwhile, “coolant” might refer to either pure water, pure antifreeze, or a combination of the two. According to NAPA, a 50/50 mixture of the two is commonly offered in stores, combining water’s great heat-transfer abilities with antifreeze’s low freezing point. For the greatest results, you do need at least a 70/30 antifreeze/water mixture.
According to Valvoline, coolant often comes in green. However, additional hues like orange, blue, purple, even yellow and pink are also offered. They’re not distinct hues, though, just for show. Each manufacturer bases the development of their engines on a certain coolant or antifreeze standard with various additives. According to Hemmings, GM employs orange-colored Dex-Cool antifreeze while VW prefers yellow- or blue-colored coolants.
These many kinds of antifreeze all function mostly in the same way. They stop corrosion and mineral buildup in the radiator as well as the freezing and boiling off of water. They can also lengthen the lifespan of the rubber hoses in your cooling system. More evidence that long periods of inactivity or storage are bad for autos.
The two coolants share the same general objective, however a green coolant cannot always replace an orange one. or be blended.
Is coolant the same as radiator fluid?
I’m sorry, but is it true or false that coolant and antifreeze are interchangeable? The response is TRUE! When in doubt, just refer to these substances as radiator fluid because it makes things simpler.
Winter has arrived, which means it’s time to get your car ready for icy weather, salty roads, and slushy driving conditions. Many individuals are aware that their radiator needs coolant or antifreeze when the weather is frigid. And now you are aware that radiator fluid, which is a general term for antifreeze, coolant, and other similar terms, is essentially the same thing. Additionally, you are aware that this fluid is essential to maintaining the functionality of your car’s engine and aids in preventing overheating or freezing in any weather. So, Mother Nature, let’s go!
Is it acceptable to mix blue and green coolant?
Let’s address the big question: Can you combine different brands? now that I’ve clarified what goes into coolants.
Yes, that is the response. Peak can be blended with Zerek or Prestone, but only if they are both the same chemical type of coolant. The ratio is less important, but the type and application must be compatible.
The simplest method to keep this in mind is to try to pair together like types: IAG with IAG, OAG with OAG, and HOAT with HOAT.
However, it’s qualified and depends on getting things to match as closely as you can, just like anything else. Combining various antifreeze or coolant brands may reduce their corrosive effects and endanger your engine.
There will be times when you won’t have an option but to use various coolant or antifreeze brands. as when you go to a hardware store or gas station and discover that the brand you typically buy is sold out.
The safest course of action in that case is to drain the old coolant and replace it with the safest coolant or antifreeze you can locate.
In a pinch, however, you can use the closest match, particularly if it’s temporary.
Can I use water to fill off my coolant?
Only in an emergency situation when the coolant liquid level is lower than it should be, should coolant be topped off with water.
You shouldn’t rely on topping up with water to bring you safely to the closest garage and help you find any problems.
A small amount of water added to coolant shouldn’t cause any significant harm, but too much water will lower the coolant’s boiling point and prevent it from performing as effectively.