A dead battery, an alternator issue, or a bad starter are the three most frequent causes of a Nissan Rogue not starting.
In This Article...
The battery and battery terminals should be checked first if your Nissan Rogue won’t start. See whether your Nissan Rogue can be jumpstarted to address the issue. If your issue was fixed, a defective or depleted battery is most likely to blame. You might need to examine the battery terminals, the starter motor, the alternator, and in certain cases, the fuel system if the issue still persists.
The Nissan Rogue was first released by the carmaker in 2008. Over the years, the car gained a ton of customers.
You might occasionally need to deal with starting problems if you drive a Nissan Rogue. There are several reasons why your Nissan Rogue won’t start, including a weak battery, an unreliable alternator, a damaged starter, and more.
Finding the appropriate cause for your Nissan Rogue starting issue might occasionally be overwhelming. Fortunately, several other indications are found by automobile experts. To further reduce the list and find the problematic component, you can keep an eye and an ear open.
Any issue with a starting process component will prevent your Nissan Rogue from starting. As a result, finding the true offenders can be somewhat difficult.
When your Nissan Rogue won’t start, experts have come up with a list of possible scenarios and additional indications you can notice. Each symptom denotes a distinct defective component.
An inoperative motor
You’re unable to start your car, and you’re not sure why. It’s possible that the starter is broken. The starter draws energy from the battery to start the engine. The starter could be affected if an outdated component is wearing out or if there is a malfunction.
Failure of the starter motor is most likely to blame for the Nissan Rogue’s inability to start or produce clicking noises. The starting motor shouldn’t break down soon because it should endure for at least 100,000 miles (plus or less).
Causes and solutions for the Nissan Rogue’s clicking noise and difficulty starting
When it comes to problems with no-crank starting, the Nissan Rogue creating a clicking noise when the engine is tried to start is a pretty typical issue that, in most circumstances, can be readily addressed.
The weak battery, corrosion on the battery terminals, poor starter electrical connection, poor ground connection, and a defective starter motor are the most typical causes of clicking noise and no crank in Nissan Rogue vehicles.
What are some of the beginning issues with the 2016 Nissan Rogue?
There are numerous causes for why Your Nissan Rogue won’t start, but the three most frequent ones are a dead battery, an alternator issue, or a bad starter. The engine start is the primary purpose of the car starter. The battery, which assists in starting the car, sends electricity to the starter. After that, the starter uses the energy to turn the engine on. Like the alternator, the starter can malfunction and result in a variety of issues. A defective starter or one that is malfunctioning won’t crank the engine quickly enough to start it. The first thing to note is that there is nothing wrong with your starter if it turns your engine quickly and doesn’t make any strange noises you haven’t heard before.
A dead battery or a damaged starter motor are the two main causes of 2016 Nissan Rogue starting issues.
Common causes of this include:
Bad starter: Starter motors can deteriorate and begin to malfunction over time. If this is the issue, a new starter needs to be installed. The starter is not the issue if the car starts. The starter may be at fault if the ignition is turned on but nothing happens, or if the engine turns over very slowly and the dash lights dim while the engine is cranking.
Poor Relay Wire: The starter motor may not operate if the starter motor’s starter motor wiring is loose or damaged. It will be necessary to replace or fix the wiring.
Dead or low battery: The starter motor requires electricity from the battery to function. The starter motor may not run if the battery is weak or failing to supply adequate electricity. This issue should be fixed by charging the battery or replacing it.
The battery terminals may also be loose or have developed corrosion. It is advised to clean and tighten the cables and terminals.
Failure of the Solenoid: The starter system frequently experiences problems with the solenoid, which makes it challenging to start the car. To identify whether the beginning motor or solenoid is the issue, the starter must be examined. The malfunctioning solenoid must be replaced.
Ignition Switch Failure: One of the most typical signs of an ignition switch failure is that the car is difficult to start. If the ignition switch is warm to the touch, there may be a problem with the wiring for the ignition switch. A malfunctioning ignition switch will eventually cease to function entirely and will require replacement.
Fuel pump defect: If the engine is not receiving enough fuel, starting will be challenging, if not impossible. When the fuel pump does not provide enough fuel, the automobile will start slowly and eventually not at all. The fuel pump is in charge of transferring fuel from the tank to the injectors.
Spark plugs, which produce the spark that enables a vehicle to burn fuel, are fouled. One of the most frequent causes of a hard starting engine is fouled plugs. The voltage needed to leap the gap and ignite the fuel rises as the electrodes deteriorate. This may result in the engine taking longer to start.
Clogged Fuel Filter: A clogged fuel filter might make it exceedingly challenging to start a vehicle. The fuel filter, which removes impurities, might clog up over time. This will make it difficult to start the car since the injectors won’t receive enough fuel.
Fuel that has been contaminated by too much alcohol or water will make it difficult or impossible to start an automobile. Even if it does start, tainted fuel can cause the engine significant harm. Immediately get the vehicle inspected if fuel contamination is suspected.
Why won’t my Nissan Rogue start?
The lowest S trim of the 2021 Nissan Rogue is the only one without remote start as a standard feature. This means that if you choose the SV or SL, either conventional or Hybrid, you will be able to remotely start your car to turn on the air conditioning on warm days or even get a jump start when you’re rushing out the door in the morning.
Your Nissan Rogue must have all doors closed and locked in order to activate remote start. On the key fob, first press the lock button. Hold down the engine start button for at least two seconds within the following five seconds. The engine and automatic climate control, both standard on the SV and SL trim levels, will start and operate for 10 minutes as a result.
Repeat the procedure using the key fob if you need to extend your startup time, and you’ll get an additional 10 minutes to get inside the car. Once into your Nissan Rogue, depress the brake pedal and engage the push-button ignition, and you’re ready to go.
How do you use the key to start a Nissan Rogue?
The Nissan Rogue’s ability to start the car remotely is one of its more recent features. With a remote start, your automobile can be started remotely utilizing the features of your key fob. Only the entry-level S model in the 2021 Nissan Rogue lineup lacks this feature; all other versions include it as standard equipment.
For car owners who reside in chilly climates, remote starters are particularly useful and practical. It’s excellent for getting your car started and warmed up before you leave the house. You don’t need to wait inside the car for the heater to turn on.
On hotter days, you may already have your air conditioner going before you start to feel warm. Your automobile will run more efficiently if you have a remote start since it can warm up the engine oil. This facilitates the free flow of oil throughout your engine.
By letting thieves know you are close, a remote start can also deter theft of your car.
Owners of Nissan Rogue automobiles can follow these procedures to activate remote starting:
- Ensure that the car’s doors are fully secured and closed.
- Your key fob’s “LOCK” button should be depressed.
- Hold down the engine start button for at least 2 seconds within the following 5 seconds.
- Hold off till the car starts. Your Nissan Rogue’s automatic climate control system will also be turned on during this time, and it will run for roughly 10 minutes.
- Simply repeat the procedure to give your vehicle an additional 10 minutes of idle time if you need to increase the starter duration. However, keep in mind that leaving your automobile idle for an extended amount of time can be bad for the environment and is not advised.
How can you use a dead key fob to start a Nissan Rogue?
This is how: Depress the little release button after turning the Nissan key fob around. From the key fob’s base, remove the concealed emergency key. To enter your Nissan, put the emergency key in the driver’s side door and open it.
My Nissan Rogue won’t recognize keys; why?
Even if the battery in your Nissan fob is still good, there may be times when the car doesn’t recognize it. The battery is usually either dead or low, but your Nissan’s remote key functions could not be working properly. Reach out to our service department and we’ll be pleased to help if changing the battery doesn’t work.
Why is there a clicking sound coming from my Nissan Rogue?
There are many various issues that can cause the wheels to make a clicking or popping noise. Here are a few of the more important ones:
Damaged CV joint: A damaged CV joint is the most frequent source of a clicking or popping sound coming from the wheels. Constant Velocity, or CV, joints are essentially the wrists of your car’s steering system. The front axle’s joints, which are located at its end, give the axle the flexibility it needs to move with the wheels and suspension. A damaged CV joint causes the axle to become rigid and causes the wheels to turn with a continual clicking sound.
Struts that aren’t working properly: Your suspension system’s struts play a key role. Struts, which are shock absorbers with spring coils, assist the suspension in absorbing road shock so that the car’s chassis and interior are not damaged. A piston and a cylinder with a liquid or gas inside are the foundation of struts. The gas or liquid acts as resistance against the piston, which helps to greatly reduce road shock. This shock absorption is enhanced with a spring coil. The suspension is incapable of absorbing the majority of the impact from the road when the struts are damaged or stuck. In addition to being bad for your car, this frequently causes the wheels to make an odd noise.
Hubcaps that are loose: If your hubcaps’ lug nuts go loose, the hubcaps will have extra movement and may shake as you drive quickly or when you make turns. You’ll typically hear a rattling sound from your car’s interior as a result of this shaking.
Drive belt tensioner issues or a loose drive belt affect the power steering, air conditioning, and alternator, which are all connected to the crankshaft by the drive belt. The drive belt tensioner maintains tension in the drive belt so that it can perform its function effectively. The drive belt will tap against the vehicle and create a loud noise that sounds like it is coming from the wheels if one of these goes loose.
Uneven tire shape or inflation: If the size, shape, and inflation of your four tires are not particularly similar, your wheels may create strange noises as you drive. Make sure your tires are always inflated to the proper pressure and have the proper specifications. Additionally, if your tires start to bulge or show any unusual wear, you should replace them.