For a Nissan Rogue (2014–2021) Key Fob with a low or dead battery, use this replacement kit. A Panasonic CR2032 3V battery is included.
In This Article...
Nissan Key Fob Battery Replacement
Although replacing the key fob battery on your Nissan model is a simple procedure, it does require handling delicate and sensitive electronics. Make sure to use gloves to prevent harm to the key fob (latex or non-latex substitute). The CR2032 3V battery is used in the Nissan key fob. Typically, a multipack of them costs less than $5 USD. A tiny flathead screwdriver is also required.
- Nissan key fob flipped over to the rear
- Slide the little lever to release the emergency key.
- Delete the emergency key
- Find the open slot between the front and rear portions of the key fob on its top.
Response from CarsGuide
The manual key shaft can be removed by lifting the tab on the rear of your Nissan X-Trail (also known as Nissan Rogue) smartkey. With the little nooks on the side of the key, carefully pull apart the key body using a small flathead screwdriver. Remove the battery, swap it out for a fresh #2032 battery (positive side down), clip the key back together, and then reinstall the manual key. You must now research how to program a Nissan Rogue key fob if your key is entirely new to your vehicle.
What does “key battery low” on my Nissan Rogue mean?
The Nissan Intelligent KeyTM system warnings in newer Nissan vehicles will show up as one of the following messages in the information display:
When an Intelligent Key is present but the system does not recognize it, a “Key ID Incorrect” alert is displayed.
If your key fob’s battery has to be changed, a “Key Battery Low” alert can show up.
When the key is left outside the car or the key fob battery is already dead, a “No Key Detected” alert could show up.
When the message “Key System Error: See Owner’s Manual” appears, there is a problem with the Intelligent Key system as a whole. If the warning light comes on while the engine is running, you can keep driving the car, but it is advised that you have your system checked at the nearby authorized Nissan dealer. If this warning shows when the engine is off, take note that you might not be able to start it.
How is a Nissan Rogue key programmed?
Reprogramming Nissan Intelligent Key Fob Do not turn the car on after inserting the key. Take the key out and carry out this action around six more times. Remember that success might not come for up to ten attempts. When the Nissan Intelligent Key is accepted by the vehicle, the hazard lights will flash twice.
How can you use a key fob to start a Nissan Rogue?
The lowest S trim of the 2021 Nissan Rogue is the only one without remote start as a standard feature. This means that if you choose the SV or SL, either conventional or Hybrid, you will be able to remotely start your car to turn on the air conditioning on warm days or even get a jump start when you’re rushing out the door in the morning.
Your Nissan Rogue must have all doors closed and locked in order to activate remote start. On the key fob, first press the lock button. Hold down the engine start button for at least two seconds within the following five seconds. The engine and automatic climate control, both standard on the SV and SL trim levels, will start and operate for 10 minutes as a result.
Repeat the procedure using the key fob if you need to extend your startup time, and you’ll get an additional 10 minutes to get inside the car. Once into your Nissan Rogue, depress the brake pedal and engage the push-button ignition, and you’re ready to go.
What should I do if the battery in my Nissan key is low?
You can resume using the key fob to start and enter your car once the battery in your Nissan smart key is replaced. The steps to follow to change the battery in your key fob are as follows:
- When the battery died, you could still enter your Nissan by using the concealed key.
- Remove the old battery and the key casing.
- Place the negative side of the CR2025 battery upward before replacing it.
- Reassemble the key fob and give it a try!
How big of a battery does a key fob take?
The fact that button cell batteries have an identifying number printed directly on the top is one practical feature. This number, which is often three to four digits long, will let you know what kind of battery you need. The CR2032 button cell is the one that’s most frequently found in key fobs. The following button cells are also frequently used: CR2450, CR2025, CR1616, and CR2016.
The type of battery that your fob requires may typically be found in your vehicle owner’s manual if, for any reason, you are unable to locate the number on your old battery. Alternately, you can visit your nearby Batteries Plus, where one of our specialists will assist you in identifying the best battery for your requirements.
How long does the battery in a Nissan key fob last?
The battery in your car’s fob or remote will eventually need to be replaced, just like any other battery. A car fob battery should typically last three to four years. In addition, there are several indicators that will let you know when your fob battery is running low.
Signal strength loss is the initial symptom. The majority of contemporary fobs can communicate with your car up to 50 feet away. But as your battery ages, the signal’s intensity and range will decline. Another indication that your key fob battery needs to be changed is that you are having to push buttons to lock and unlock doors repeatedly.
Why does the battery in my Nissan key fob keep dying?
When our technology malfunctions, it is annoying. Frequently, it is as a result of a dead battery. There are a few typical causes of battery death. For instance, incorrect use or storage might cause a battery to deplete. It might also have simply reached the end of its life! Each battery is unique. Although your key FOB might be dead for this reason, it might also be dead for another cause, in which case you might need to get creative.
When your Nissan key fob dies, how can you start it?
This is how: Depress the little release button after turning the Nissan key fob around. From the key fob’s base, remove the concealed emergency key. To enter your Nissan, put the emergency key in the driver’s side door and open it.
What is the price of a key fob battery?
These batteries typically cost $10 or less, however some fobs need two. Since it just takes a few seconds, battery specialists and dealers frequently replace the batteries for free.
How often should I replace the battery in my car key?
Q. My Jeep Wrangler (2013) has 26,000 miles on it. How do you know when the key fob’s battery needs to be changed? I’m having trouble getting a response from the dealership, and I don’t want to be stuck with a broken remote.
A key fob’s battery life is dependent on how frequently it is used. My 10-year-old remote control was still functional. The fob for our other car only operated for around three years before failing. There are a few options available to you. If you have more than one key fob, keep one of them empty so you’ll have one on hand in case your primary fob breaks. Simply changing the battery every three to four years is another option. The performance of the fob will deteriorate, just as a remote control for a television. The battery is failing if the fob’s range is less than what you are accustomed to. Though it would be easier to just replace the battery if you were to open up the remote control, you could also check the battery voltage.
The Car Doctor for AAA Northeast is JohnPaul. He is an ASE qualified master mechanic with more than 40 years of expertise in the car industry. To ask a question about an automobile, contact [email protected].
What should I do after changing the battery in my key fob?
The majority of people use their key fob to unlock their car doors and trunk. But what occurs if the battery runs out? You might believe that getting a new key fob requires visiting a dealership or a locksmith, but did you know that you can simply reset it yourself?
This is how:
Find the little button on your key fob first. This is typically found on the fob’s backside.
2. For around 15 seconds, press and hold the button.
3. Release the button after 15 seconds, and your key fob should be reset!
The owner’s manual for your car should always be consulted if you have any issues or inquiries.
Simply press and hold the reset button for a few seconds if your key fob has one. Remove the battery cover and press the tiny reset button on the circuit board if your key fob lacks a reset button.
What happens if the battery in my key fob dies while I’m driving?
My car’s key fob seems to be coming in and going out, though. I know I merely need to replace the battery, but I don’t have much free time. What if the key fob entirely fails while I’m operating the vehicle?
In less than two minutes, find out if your auto insurance is being overcharged.
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
If time is of the essence, you should be aware that changing the battery in your key fob just requires two minutes, albeit you will need to visit a general store or pharmacy to obtain the battery.
Why not change the battery in your car insurance at the same time as you replace the one in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.