Look what I learned about my radio; I was beginning to worry that I could be suffering from the dreaded raido fading. The SSV was set to “OFF,” and now all channels appear to be operating as they should. The next is from from the instruction book, Fab.
Control of POWER and VOLUME:
Push the POWER/VOLUME control knob when the system is off to bring up the mode (radio or CD) that was playing just before the system was turned off. To do this, turn the ignition key to ACC or ON.
The audio system in this car incorporates speed-sensitive control volume (SSV). As the vehicle’s speed changes, so does the audio volume.
BASS, MIDRANGE, TREBLE, FADE, BALANCE, and SSV AUDIO KNOB:
To switch the mode, turn the AUDIO knob as follows: BASS!MID!TREBLE! FADE! BALANCE! SSV
Press the AUDIO knob until the selected mode shows in the display to make adjustments to the Bass, Mid (Midrange), Treble, Fade, and Balance. the tuning knob
Turn the Bass and Treble knob to the appropriate setting. The Tuning knob can also be used to modify the Fader and Balance modes. Fader changes the
Balance controls the sound between the right and left speakers as well as the volume between the front and rear speakers.
Turn the Tuning knob to the right or left to switch the SSV mode to OFF, LOW, MID, or HIGH.
Once the sound quality is set to the correct level, keep pressing the AUDIO knob until the radio or CD display comes back on. Otherwise, after roughly 10 seconds, the radio or CD display will automatically reappear.
In This Article...
Can the speed-sensitive volume control be disabled?
The SDVC may be turned on or off in just a few simple steps: Click the Setup button first. 2. Press Enter after turning the Volume Knob to Main.
What does the phrase “speed-sensitive volume control” mean?
The sound levels of several INFINITI vehicles are automatically adjusted dependent on the vehicle’s speed and/or outside noise from traffic. You have the option of changing the system’s volume levels or disabling the feature.
What is Nissan speed volume?
VSS stands for Vehicle Speed Sensor, which measures your speed. If the Juke’s volume sensor is turned on, the volume of the radio will increase as you drive faster and decrease as you drive slower. This speed-based volume adjustment is especially useful and appreciated when you’re driving with the windows down and/or the sunroof open. A mid-range setting of three is typically workable and livable.
What is volume adjustment that is speed dependent?
You can always hear it clearly no matter what pace you’re going thanks to speed-dependent volume management, which adapts the sound output of your audio system to the current speed of your automobile. To do this, either the radio system has a connection to the CAN data bus or a separate contact is used to pick up the speedometer signal. Then, utilizing the data on the vehicle’s speed, the volume is automatically adjusted. In the options menu for the car, this can be changed.
What does SVC in a car mean?
Speed-sensitive Based on the speed of the vehicle, Volume Compensation (SVC) regulates the volume. The audio volume increases as you move more quickly. The level of the audio drops as you go more slowly.
How often do cars start up?
Your sound system has a parameter called maximum starting volume that controls how loud it can play when it first turns on. By doing this, you can avoid damaging your hearing if you unintentionally leave the level on high. The infotainment system has an adjustment for the maximum startup volume:
Press the Menu or Menu/Sel knob after highlighting Radio Settings.
Press the Menu or Menu/Sel knob after highlighting Maximum Startup Volume.
To choose the desired setting for the maximum startup volume, turn the Menu or Menu/Sel knob.
Adaptive volume control: what is it?
In order to account for variations in road noise as the vehicle’s speed changes, the AVC feature modifies the volume level.
There won’t be any loudness increase if the AVC level is zero. The volume won’t significantly rise at speed with a low level setting. If a high level option is used, the volume will rise noticeably and more quickly.
The AVC level is set by:
To reach the volume settings menu, hit the MENU button and then use the menu navigation control (10), pressing up or down to select AUDIO settings. choose adaptive volume
To change the AVC setting, press the left and right buttons on the menu navigation control (10).
What is compensation for sound volume?
Some hi-fi systems have an option called loudness compensation, or just loudness, that raises the volume of the high and low frequencies.
[1] This is designed to be utilized when listening at low volume levels to make up for the possibility that signals at extremely high and low frequencies may become inaudible as audio loudness diminishes due to the ear’s reduced sensitivity to these frequencies.
[2] As a result, audio content may sound thin at low volumes and lose treble and bass. This problem is intended to be fixed by the loudness correction feature, which employs equalization. [3]
What exactly is midrange music?
This section of the frequency spectrum has the loudest sounds. This song includes vocals, guitar, and a variety of other noises. This range gives the music more clarity and detail, which enriches our listening experience. The range where your ears are most sensitive is the higher midrange. This range contains consonant sounds from the voice, including k, p, s, and t. The ear canal, which connects the outer ear to the eardrum, naturally resonates in a range of about 3.5 kHz because of the structure and evolution of our ears. You receive the core of the most instantly recognizable frequency here, whether you’re falling in love with A.R. Rahman’s “Dil Se” or Michael Jackson’s “Thriller.” Now, try to identify and distinguish between the frequencies discussed thus far the next time you hear a song.
The High Frequency, often known as Treble, comes in last but not least. The musical spectrum’s sharp and shrill end, which cuts across the others, is represented by this. This range gives music a high-end clarity and brilliance, as the name would imply. This range includes instruments like flutes, bells & whistles, chimes, and occasionally vocalists who can sing in high registers. Future’s “Mask Off” has a captivating flute melody that is a beautiful illustration of highs. Even though the music is playing, the flute’s melody can be heard again.
Do pay attention to any music you listen to now that you are aware of the various frequency ranges in audio and how they interact with other frequencies perceived by people. Try to distinguish between the various ranges. Keep in mind that all frequencies must be balanced at all times to prevent the music from sounding unbalanced. Keep the volume of a music between medium and loud, or at a noticeable level, and listen. You can improve your listening abilities and develop as an audiophile by isolating one instrument and trying to follow it throughout the song. We’ll leave you with Queen’s “Bohemian Rhapsody,” which is thought to enjoyly indulge in all frequency ranges. Test your ability to independently monitor each frequency. Once you’ve done that, pay attention to the overall experience while listening to the song. You’ll enjoy it, we’re confident.
What does SSV on a stereo stand for?
Speed Sensitive Volume, or SSV, refers to a system that automatically modifies volume in response to speed. The volume will rise to compensate for the increased road noise as you travel quicker. When you first turn it on, the volume will automatically increase.
What is audio in ASL?
Automated Sound Leveling is the same as the automatic volume control in your prior vehicle. There are four options: OFF, LOW, MID, and HIGH. Try changing the setting to MID or HIGH if you still can’t hear the change. As you approach 20 mph, the volume should start to rise.
What is Svc used for?
A static VAR compensator (SVC) is a group of electrical components used in high-voltage electricity transmission networks to supply quick reactive power.
[1]
[2] The flexible AC transmission system[3][4] device family, which SVCs are a part of, controls harmonics, power factor, and voltage in addition to stabilizing the system. There are no substantial moving parts in a static VAR compensator (other than internal switchgear). Power factor adjustment was previously only possible with huge spinning equipment like synchronous condensers or switching capacitor banks. [5]
The SVC is an automatic impedance matching tool created to nudge the system’s power factor closer to unity. SVCs are applied in two primary circumstances:
- connected to enhance power quality and close to heavy industrial loads (“industrial SVC”)
- to control the transmission voltage when connected to the power grid (“transmission SVC”)
The SVC is employed in transmission applications to control grid voltage. The SVC will use thyristor controlled reactors to consume VARs from the system, lowering the system voltage, if the reactive load on the power system is capacitive (leading). The capacitor banks are automatically switched on when inductive (lagging) conditions exist, resulting in a greater system voltage. The continuous variable leading or lagging power is achieved by coupling the continuously variable thyristor-controlled reactor with a capacitor bank step.
SVCs are frequently positioned next to heavy, quickly fluctuating loads, like arc furnaces, in industrial applications because they can calm flicker voltage.
[1]
[6]
How does treble affect automobile audio?
Most individuals are familiar with the low-, mid-, and high-frequency sounds that are combined in music as bass, middle, and treble. Although these phrases are well-known, it’s a good idea to start with them as a refresher because they give a foundation for understanding the remaining concepts we’ll be talking about in the future.
The 20–20,000 Hertz range corresponds to the audible spectrum. The lowest frequency that the human ear can perceive is 20 Hz, or 20 cycles per second of a loudspeaker (usually a sizable subwoofer) traveling forth and backward. On the other hand, 20,000 Hz denotes a loudspeaker’s rate of oscillation, which is typically 20,000 vibrations per second for a tiny tweeter. The highest frequency that the human ear can detect in the high-pitched region of the audible spectrum is 20,000 Hz.
To put things into perspective, any sound that is between 20 and 250 Hz is considered to be bass. The bass drum (100 Hz), the viola, and the tuba are among the instruments in this range (196 Hz). Midrange music comprises instruments like the guitar (275 Hz), flute (800 Hz), and piano, and is audible between 250 and 4,000 Hz (2,000 Hz). Last but not least, all treble sounds range from 4,000 to 20,000 Hz, but 12,000 Hz is often the upper limit for musical instruments. Cymbals often average out to 8,000 Hz, but a triangle normally oscillates around 4,500 Hz.