It’s time to discover how to reset the airbag light now that we understand how airbags work. If you are not completely confident in your abilities, have only professionals operate on the airbag system. To reset the airbag light, adhere to these instructions:
In This Article...
Step 1: Check the passenger airbag switch
This button is typically on the dashboard on the passenger side, and you may see it if you open the passenger door or the glove box. This is the first thing you should check when you want to turn off the airbag light. Maybe someone before you accidentally turned it to Off, which will cause the airbag light to remain on in most cars.
Step 2: Read the trouble codes with an OBD2 Scanner
Working with your airbag system is essential, therefore always use an OBD2 scanner to read the fault codes to determine where to begin troubleshooting. Never resolve the issue brought on by the airbag light before clearing the trouble codes. Continue the diagnostic by reading the codes to learn what might be the issue’s cause.
Step 3: Repair the fault
Never simply reset the airbag light without fixing the issue. When a collision occurs, this may cause the airbags to deploy or not work at all. If you are unsure of how to repair the airbag’s parts, let a pro handle it. Always remember to disconnect the battery connection before servicing an airbag. After fixing the issue, the airbag light frequently goes away by itself, although not in all car types.
Step 4: Clear the trouble codes
It’s time to reset the engine light when you have completely installed the new parts and are confident that everything is installed correctly. There is no other way to accomplish this; you must use an OBD2 scanner. Make that the airbag light is reset and that it no longer appears on the dashboard. If the problem persists, read the codes again and look for any error codes.
Step 5: Restart your car & test-drive.
Restart your engine and take a test drive if your dashboard’s airbag light appears to have disappeared. After a test drive, if the airbag light has disappeared, there is a good likelihood that the issue has been resolved. Reread the codes and carry out the steps again if the issue reappears.
What is the cost of turning the airbag light back on?
The first step is to reset the airbag light, which can take several hours and cost a few hundred dollars on average, however it can cost as much as $600 depending on the automobile.
What does it imply if the airbag light is on indefinitely?
A problem with the seatbelts or airbags is indicated by the airbag light. Therefore, it’s usually not a good idea to drive when the airbag light is on. We advise having it towed to the dealership rather than driving it yourself if it continues to flash inside your car.
What could turn on the airbag light?
The airbag light may have illuminated for any number of reasons, just like other warning lights. Here are a few of the most frequent causes:
The airbag needs resetting
The airbag light will turn on if there has been a collision but it wasn’t serious enough for the airbags to deploy. At your neighborhood garage, the airbag needs to be reset.
Corroded sensors
The sensors in your automobile may have deteriorated if it has water damage. This would lead to a malfunction in the system and turn on the airbag light.
Dislodged wiring
If your car has side airbags, the passenger side airbag may occasionally malfunction. When the passenger seat is shifted back and forth, the wires for that airbag may become damaged or displaced. We caution against attempting to reconnect a detached plug because you risk setting off the airbag. Make an appointment for your car at a nearby garage and ask them to check it.
Faulty seat belt
Your seat belt sensor can be the cause of the problem. The sensor that determines whether or not you have buckled up can malfunction occasionally. When this occurs, the airbag light can start to illuminate.
Your airbag clock spring may need replacing
The spring is intended to preserve continuity between the wiring and the driver’s airbag and coils throughout your steering wheel. The spring may wear out and fail over time, turning on the airbag warning light. Older autos are more likely to have this flaw.
The important line is that you must stop driving as soon as your airbag light illuminates and have your automobile inspected by a repair as soon as possible. Your airbags won’t activate until the issue is identified and remedied. Never disregard your airbag light since your safety and the safety of your passengers are top priorities.
What location do the airbag sensors have?
There are seven locations where sensors are mounted: on the radiator, engine case, back of the front headlight, firewall, airbag electronic control unit box, gearbox case, and B-Pillar. 40% of car collisions in their frontal plane hit the rigid barrier.
Are Nissan airbags subject to a recall?
Due to a problem with the frontal inflators on the driver’s or passenger’s side, Takata airbags are being recalled. The majority of the affected automobiles are those manufactured between 2002 and 2015, including several Nissan models.
Driving with the airbag light on is it forbidden?
In some vehicles, it is even possible to turn off the passenger airbags, which will make your dashboard’s airbag light come on.
You should only deactivate the passenger airbag when absolutely necessary because, as was previously said, airbags are an essential safety element.
If your airbag light ever illuminates for no apparent reason, you should try to resolve the situation.
Will the airbag light turn on if a fuse blows?
The car could have blown a fuse, for example. There are other fuses that could be to blame, but fuse #13 is most likely the one. You probably need to change fuse #13 and perhaps other fuses if your airbag light is on and your rear windshield wiper is not working. The airbag light can undoubtedly turn on as a result of blown fuses.
The airbag light may also abruptly turn on in a number of other situations. A mechanic or auto parts store should be able to decipher the code that the airbag system emits when it is acting up, which will give them a hint as to what specific issue the airbag is experiencing. There are numerous potential issues with the airbag because it is a complicated system of sensors, wiring, and programming that must suddenly activate during an accident after lying dormant for years. Check the fuse box to see whether you have a blown fuse first, but if not, you’ll likely need to take it to the dealer or a qualified mechanic for service.
How is a Nissan airbag code read?
To read the codes, count the flashes the light makes, then count them again after the pause. For instance, two flashes, a pause, and four flashes indicate a code 24 issue with your airbag system. Codes 12 and 13 indicate low battery voltage and a shorted or grounded airbag circuit, respectively.
What is the cost of an airbag sensor?
Depending on the automobile model and labor charges, the cost to replace an airbag sensor ranges from $100 to $600. A sensor for an airbag costs between $50 and $300, as does the labor.
Both the airbag sensor and its replacement are delicate parts. Even for an expert, correctly diagnosing and installing the airbag sensor can take up to two hours.
The airbag sensor itself is typically not very expensive; you may anticipate paying between $50 and $300 for a brand-new one. Never purchase aftermarket sensors; don’t take the chance. Always purchase OEM original, authentic items.
You can save money by replacing the airbag sensor yourself if you are highly confident working on cars and meticulously following the repair manual.
If you have even the least qualms regarding the replacement, have a pro handle it.
Keep in mind that it is a crucial component, therefore installing it properly is important in case of an accident. Additionally, if you make a mistake, there is a chance that all of the airbags in the car will deploy, which will cost thousands of dollars to fix.
Can I drive if my airbags are off?
Is it prohibited to operate a vehicle without an airbag? Does this go against any laws?
Driving a car or any other motor vehicle without an airbag is now banned under neither state nor federal law, making it comparable to doing so while towing a trailer or wearing a sling on one arm.
Although it is not specifically prohibited to drive without airbags, it is not allowed to modify or remove airbags from certain automobiles.
Vehicles without airbags were still offered by manufacturers in the 1990s. However, when airbags were accepted as a standard safety feature in 1999, everything changed. The laws governing this safety device have now been revised.
If the airbag light is on, will the airbags deploy?
It is safe to presume that the airbags won’t deploy in a collision when the airbag warning light is on. For your safety, the system deactivates the airbags when it finds a defect.
As a result, you won’t need to be concerned about the airbags releasing on their own due to a failure. You must immediately have the light inspected to guarantee your safety while driving.