Most of the time, replacing a tail lamp cover just entails switching out the cover with a few screws, bolts, and/or fasteners. You could occasionally come across damaged bulbs that also need to be replaced. It’s usually a quick fix that just takes an hour or two to complete when you have this done at a repair shop. An additional benefit is that mechanics don’t have to waste time running diagnostics to determine what’s wrong. A broken tail light cover is something that can be seen right away by simply looking at it. Even though a damaged tail light may not always be immediately apparent, the presence of water or fog inside the lens is evidence that there is damage.
You may anticipate that most repair shops will readily be able to find time in their schedule for the service because changing a tail light cover is one of the speedier repairs. Given how quickly the replacement can be made, it will probably be ready for you the same day. The only issue you might have at the store is that they don’t currently stock the appropriate cover. If so, you’ll have to wait for them to place the order.
In This Article...
Is changing a tail light assembly difficult?
Fortunately, changing the tail light bulbs isn’t hard and shouldn’t take you more than 45 minutes to an hour.
Tail Light Assembly
The group of lights positioned on the back of your car is known as the tail light assembly. They are made up of the reverse lights, brake lights, and tail lights. Each set of lights has a specific function for nighttime conspicuity. The red tail lights are connected to switch on in conjunction with the activation of the front position lighting. When the driver applies the brakes, the brake lights turn on. On both sides of the car, these lights, which are a vivid red, are mounted in multiples of two.
In some vehicles, the brake lights and the tail lights can be merged. They can be placed as a dual-intensity bulb in these circumstances, with the brake-light having a brighter intensity. Fog lights are also used in cars to improve rear sight in heavily foggy conditions. When the driver shifts into reverse to back up the automobile, the reversing lamps turn on. For both your safety and the protection of other drivers, you must make sure the tail lights are in functioning order.
You should replace the tail light assembly if your tail lights have sustained external damage or if the lenses are dim. For every make and model of vehicle, Buy Auto Parts keeps a large selection of tail light assemblies in stock.
We offer excellent aftermarket components as well as original OEM replacements. All of our auto components are rigorously examined and backed by a warranty. Choose the correct year, make, and model of your car from our online catalog to view the components that fit it. You can purchase premium tail light assemblies at Buy Auto Parts for unbeatable pricing, plus free shipping. Contact us by email at [email protected] or over the phone at 1-888-907-7225 if you have any inquiries about our auto parts.
How do you take a Nissan Hardbody tail light off?
The complete assembly must be taken out of the rear quarter panel whether you’re changing a rear light bulb or the taillight assembly on your Nissan pickup. Nissan trucks have been in production for a long time and have undergone numerous model and generation changes. The removal of the taillight assembly is the same for all models, though.
Step 2
The taillight assembly is attached to the rear quarter panel by two screws, which must be removed. They will be on the outside edge of an older Nissan pickup. They are situated on the inside corner of the bed on the more recent Frontier and Titan versions. Remove the brass hinge screws from Frontier models that come with the bed extender gate option.
Step 4
Remove the light sockets from the taillight assembly’s back, but make sure to mark them so you can properly reinstall them when you rebuild the taillight assembly. To remove the sockets from the assembly, turn them 1/4 turn counterclockwise.
the Phillips screwdriver
How can I fix a broken tail light cover?
Craft glue might work if your tail light cover simply has a crack in it. However, if the damage is more significant, you should use some lens repair tape to cover the exposed region. This is available at most auto parts retailers, including this dealership.
Step One
Find out first how to get to the taillight bulb on your car. While you can access the taillight housing from the outside of some vehicles, you have to open the trunk on other cars and SUVs to get to the taillight bulb.
Consult your owner’s manual if you need help figuring out how to get to the taillight bulb.
Step Two
You can decide what equipment you’ll need now that you know how to get to the taillight bulb. Either a flathead or Phillips screwdriver will probably be required. To remove the screws keeping the taillight housing in place, gather the necessary equipment. You might not require tools if the taillight housing is accessible on your car. The cloth covering may easily be removed to reveal the bulb in its socket.
Step Three
Once the housing has been removed, decide which bulb or bulbs need to be replaced. Find the light bulb holder that contains the one you need to replace. Unscrew it by rotating it about a quarter turn and pulling it out to dislodge it.
Step Four
Pulling the bulb out of the socket slowly will allow you to remove it. The majority of them simply pull out, but others might need to be turned a quarter turn. There might be some additional screws to remove depending on how your car is set up. To avoid shattering the bulb, be gentle when doing this.
Step Five
Make sure the socket is clear of any dirt and debris before replacing the bulb. In the same way that you removed it, put the bulb back into the open socket. In order to prevent damage to the bulb, you might want to use gloves.
The procedure you used to remove the old bulb should be repeated. Reinstall the taillight housing by putting in any missing screws. If you had to remove any extra components to get to the taillight bulb, replace them.
Step Six
Find out more about high-quality lighting items, where to buy your car part, or how to locate it.
Only for entertainment and informational reasons, the information in this article should not be used as a substitute for consulting a qualified technician or mechanic for expert guidance. We advise you to speak with a licensed technician or mechanic if you have any specific queries or issues regarding any of the subjects discussed here. We will not, under any circumstances, be held responsible for any loss or harm resulting from your reliance on any content.
How much does it cost to fix a tail light?
The cost of repairing a broken tail light bulb ranges from $20 to $100.
The revised pricing range for 2022 is between $200 and $2,000, depending on whether it’s the lens, the wiring, or an entirely new tail light assembly. The final cost is ultimately determined by the cost of labor as well as the kind of components and machinery used.
Depending on the make and model of the car, the cost to replace the assembly will vary. Depending on the mechanic you choose, you should expect to pay less than you would at a dealership for the tail light to be fixed.
O’Reilly modifies the tail lights?
While you wait, at no cost to you, our parts specialists can swiftly and easily change wiper blades because they are experts at changing headlamp and taillight bulbs.
Are the brake light and the tail light interchangeable?
The primary distinction between brake lights and tail lights is that the latter only come on when the brake pedal is depressed, whereas the former illuminates as soon as the headlights are turned on. While both lights are red, brake lights often produce a red light that is more vivid.
Are brake lights replaced by AutoZone?
AutoZone will they replace brake lights? Although AutoZone doesn’t really provide brake light replacement services, our staff can answer any inquiries you may have, direct you to the necessary supplies to get started, and even lend a hand if necessary.
What is a housing for a tail light?
The component of a vehicle’s tail light assembly that houses the bulb, wiring, and lens is called a tail light housing. To guarantee that your tail light is functioning properly, it locks and protects these vital lighting components.
Why does my Nissan Xterra have a brake light?
Bad Switch: A faulty or failed switch is a typical cause of the Parking Brake light remaining on. You may quickly verify this by jiggling the handle once it has been lowered. The switch is most likely to be the problem and needs to be replaced if the light goes out (or goes out and comes back on).
If the brake handle is not fully down, there is another factor that could cause the light to remain on. Verify again that the parking brake is released and that the handle is fully lowered. The light will remain on if the parking brake cable is under any stress.
Parking Brake Not Disengaging: Occasionally, the parking brake itself is the source of the issue rather than the switch or the wires. The dash warning light will remain on if the brake does not release when the handle is dropped.
Low Brake Fluid: Your Parking Brake light is a multipurpose device that is intended to turn on when the reservoir’s fluid level falls below a specific level. As the fluid level fluctuates, you might see the light turning on or off when making turns.
The brake fluid level sensor in your master cylinder is malfunctioning. It is sometimes integrated into the reservoir cap, and other times it is positioned on the side of the sensor. The Parking Brake light will come on if the sensor malfunctions or becomes faulty.
Uneven Fluid Pressure: If your automobile has uneven brake fluid pressure in one or more lines, it may influence how well it can stop and may even cause it to pull to one side or the other. The parking brake light in your dash can also be activated by it.