To start your Nissan Altima, the starter motor turns the flywheel, which produces electricity. Your Altima may not start if the starter motor is damaged or malfunctioning. A faulty starter motor typically makes a clicking or grinding sound made of metal on metal. These are important warning signs that your starting motor needs to be changed.
In This Article...
How can I fix a Nissan Altima that won’t start?
I’m sorry to hear that your Nissan Altima is having difficulties starting. Your Nissan Altima won’t start for a few different reasons. The most frequent causes are a dead battery, a broken alternator, or an issue with the engine starting.
Typically, an electrical component of the automobile, such as a dead battery or a damaged alternator, is to fault if your Nissan Altima won’t start.
If you think the battery is to blame, you can check its voltage at home using a multimeter to validate your suspicion. Your automobile battery is alright if you receive 12 to 13 volts, and the problem is somewhere else. The battery needs to be replaced if the voltage falls below 12.
The following are some more frequent causes of a Nissan Altima not starting if the battery is in good condition:
- faulty alternator
- Key fob battery failure
- worn-out ignition plugs
- Battery deterioration
- fuel pump malfunction
- defective starter motor
- inadequate alternator
You should take your car in for service right away to address the problem and stop more harm from occurring to your vehicle.
While taking your car in for maintenance is a terrific method to keep safe, getting excellent car insurance coverage at a reasonable price is the greatest way to make sure you’re covered. Jerry can assist!
How much should installing a starter cost?
A starter’s component rebuild could cost anything from $50 to $350. The price of a new starter can range from $80 to $350. A skilled mechanic will cost you between $150 and more than $1,100 to replace or rebuild your starter.
On a Nissan Altima, how long does it take to replace the starter?
Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.
Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If so, a 4 hour time limit would likely be more appropriate than a 2 hour one.
Download the Jerry app to see if you’re overpaying for auto insurance as you wait for the technician to finish. We warrant that replacing your starter will be much quicker!
Simply spend a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest bargain, they’ll create competitive quotations from top insurance companies. When a customer shops with Jerry, they often save over $800!
What signs point to a problematic starter?
Still, keep an eye out for these seven indications that your starter is failing.
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #5: Smoke.
- #6: The starter engages but the engine won’t turn over.
- 7. Battery
How is a starter tested?
Connect the solenoid (smaller wire) connector on the starter and the battery positive terminal on the remote starter switch, then turn the switch. If nothing transpires, your starting is subpar. If the starter engages, the electrical system is at fault.
Why do all the lights come on yet my car won’t start?
If your headlights work but your car won’t start, your battery is charged but the starter or ignition isn’t working properly. A starting engine can be jumped using a charged battery if the starter or ignition is the issue.
What sensors prevent an automobile from starting?
In addition to the more typical problems like a drained battery or a damaged starter, defective sensors can also make it difficult for modern cars to start. So which vehicle sensors could be the root of this issue? Here is what you need to know after our investigation:
The following sensors are those that frequently prevent a car from starting:
- Sensor for Oil Pressure
- sensor for the brake pedal
- Sensor for Throttle Position
- Sensor for Fuel Pressure
- Sensor of Mass Air Flow
- Sensor for Crankshaft Position
- Absolute Manifold Pressure Sensor
- Sensor for Camshaft Position
Many regular automobile owners are unfamiliar with these components, despite the fact that many seasoned automotive enthusiasts may be. Continue reading, and we’ll try to explain what these sensors are and how to tell if they’re failing.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
How do you start a Nissan Altima manually?
Put the key fob in the port if your Nissan car, truck, or SUV has one, then push the START/STOP button while tapping the clutch or brake pedal. Simply step on the brake or clutch while pressing the key fob against the START/STOP button if your Nissan doesn’t have a port.
Can I change the starter on my own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cable—the substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
How long does a starting replacement take?
A mechanic will normally need between 2 and 4 hours to accomplish a starting motor replacement, depending on the type of car. The amount of time depends, in general, on how easily the mechanic can access your starter motor, with some makes and models in smaller automobiles offering a little more of a struggle. All of our Lube Mobile mechanics are properly qualified, seasoned professionals with a broad range of vehicle knowledge.
No matter where you are in Australia, one of our mechanics is nearby and ready to service your car. Whether you need a starter motor replacement or repair service, book online right now to take advantage of a fully mobile mechanical service that can be delivered right to your door.
Starter Motor Replace Reviews
We are grateful to LubeMobile for saving us. My wife’s car’s starter motor broke down in a large shopping center parking lot. Since we do not belong to RACV, towing the automobile for repair would have been extremely expensive. Due to OHS regulations, our normal mechanic couldn’t repair it in the parking lot. I came upon LubeMobile when searching internet for a starter motor solution. I made my reservation online and received a fixed fee to switch it out as well as a discount for making it right away. The lubemobile mechanic came the following morning, swapped it over, and got us moving quickly and affordably. You don’t need roadside assistance, you just need LubeMobile, so thank you for saving the day!
incredibly impressed organized, competitive quote, excellent timing. On January 1st, I made a call to LubeMobile due to a failing starter motor. Very prompt service during a challenging season. allowed me to avoid having to pay to have my car towed to the closest auto electrician. Thank you, guys. Thank you very much. Minimum expenditure and absence of an automobile! Ros, Honda CRV’s starter motor
From correspondence until task completion, the service was prompt, effective, and very professional. I was delighted and have already referred numerous friends to Lube Mobile. Thanks.
Excellent, sincere service for a fair price! Joel the mechanic is someone I would suggest to everyone! Ian, Mazda Bravo, Replaced Starter Motor
I will absolutely suggest Lube Mobile to others and will use your services in the future. The technician Peter was very competent, arrived on time, and had the starter motor installed and working in a surprising amount of time. John, Brisbane Mitusbishi Starter Motor
What transpires when a car’s starter fails?
It frequently makes a grinding noise when the starter drive gear is worn out or not engaging properly. This sounds a lot like the sound you make when you unintentionally turn the ignition switch back on after starting your car. The engine flywheel could be harmed if the grinding symptom is ignored.
What is the price of replacing a starter on a car?
I’m sorry to hear that your car is having problems. You should also account for labor charges, which might run from $150 to $1,000. A new starter may cost between $80 and $350.
The average vehicle’s replacement starter costs roughly $500. Your mechanic appears to be charging you the standard rate for this work. However, you should plan an additional $100 to $200 on top of that charge. The mechanic might find other issues, such as a crankshaft or ring gear trouble.
A starter includes the following parts, among others:
- Solenoid
- Switch fork
- either permanent magnets or electromagnetic field coils
- gear for the starter
- bushes and bearings
- Commutator and armature
- Brushes
Remember that you have to totally remove the starter from the engine area. This can result in a hefty labor charge.
The starter is more readily accessible in some cars, and removal takes less than an hour. Some cars are more complicated than others, such those where the starter is hidden beneath the intake manifold. These are substantially slower cars. The complexity of the repair, which is partly decided by your make, model, and year, will determine the final cost.
If you truly believe that your repair bill was overpriced, you can always challenge it.
What equipment will I need to replace my starter?
Verify that the starting or solenoid is the issue before replacing an automobile starter. If you have any doubts, get both checked. (This troubleshooting manual may be useful.) Check for wear and corrosion in your battery and battery/starter wires. If necessary, replace the batteries or wires and clean off the corrosion. If your car has a starting-mounted solenoid, it makes sense to replace the starter along with the solenoid.