15.4 cubic feet of trunk capacity, which is approximately typical for an economical midsize car, can be found in the 2015 Nissan Altima. Rear seats fold down 60/40 as standard.
In This Article...
Do the back seats of a 2010 Nissan Altima fold down?
The 15.3 cubic feet of storage space in the Altima sedan’s trunk is standard for family sedans. The 60/40 split rear seats can be folded to increase that room, but critics say that doing so is challenging—a complaint we don’t frequently hear.
How do the back seats on a 2009 Nissan Altima fold down?
The Nissan Altima’s split rear seats allow you to optionally fold down one side. Of course, you can also fold the two sides in.
Model Year 2013
Follow these procedures to fold the back passenger seat in your 2013 Nissan Altima:
- Position the passenger seat as far forward as possible. By doing this, you’ll make sure you have room for the back seats to fold down.
- On the shelf between the back windshield and the back seats, there is an access cover that you may open.
- To release the seat, press the button next to the access cover.
- The seat can be folded.
From inside the vehicle, the back seat in back of the driver cannot be folded. Open the trunk instead, then pull the left strap that is dangling from the top of the trunk.
Model Year 2014
The 2014 Nissan Altima follows the identical procedures, with one exception, to fold down the back seats. Some 2014 Nissan Altima models, unlike the 2013 model, have a feature that allows the driver’s side seat to be folded from inside the car. To accomplish this, you would proceed in the same manner as folding down the passenger-side seat, but with the driver’s side seat in place.
Model Years 2015-2018
The same mechanism is used for folding the back seats in Nissan Altimas built in 2015 through 2018. The rear driver seat’s ability to be folded down from the inside of the car is a standard feature, which is the only distinction.
Watch this video to see how to service a 2013–2018 Nissan Altimas:
Model Years 2019-2021
The rear folding seat mechanism has undergone changes beginning in 2019. To fold the back seats in a 2019–2021 Nissan Altima, follow these instructions:
- Position the front passenger seat as far forward as possible. To give the folding seats the most room, this is still necessary.
- On the back shelf, remove the access cover.
- To move the lever in the direction shown by the arrow, use an item such a key or pen.
- Fold one or both seats down.
The back seats of the Nissan Altimas from 2019 to 2021 can be folded from the trunk. Two knobs can be found near the top of the trunk when you open it. To fold down a back seat, turn the knob that goes with it.
Safety Features
Although it is practical to be able to fold your seats down from the trunk, doing so may be unsafe. If someone can get into your trunk, they can also get inside your automobile by folding the seats down.
Nissan made it possible to lock your seats in specific model years in order to lessen this risk. Although you’ll need your car keys, you can still fold the seats down from the trunk.
How is the back seat removed from a Nissan Rogue?
Taking off the bolt covers and other fasteners holding the second row seats in place on a 2012 Nissan Rogue is quite simple. Enlist the aid of a friend to hoist the seat out of the car. Everything is reasonably accessible and you won’t need any special tools, which is fantastic if you want to do it yourself to save money.
Perhaps you’re giving your car a specific detail or you want to create some breathing room. In any case, the seats on the 2012 Nissan Rogue are simple to remove. Just be aware that you’ll probably require assistance to prevent damage to the seats, the car, or yourself.
Are there seat belt anchors in every car?
Tethers or tether connectors that attach to these anchors are a standard feature of all forward-facing automobile safety seats. Almost all passenger cars and auto safety seats produced on or after September 1, 2002, have LATCH functionality.
What do car LATCH anchors do?
A kid safety seat installation might be challenging. In fact, 3 out of 4 car seats are thought to be improperly placed. Without utilizing seat belts, the LATCH (Lower Anchors and Tethers for Children) method was created to make it simpler to safely install child safety seats. Infant, convertible, and forward-facing child safety seats created after September 1, 2002, as well as cars, use LATCH.
Learn more about LATCH and how it simplifies the process of installing a child safety seat by watching the video below.
Can a TV be transported in a box while lying flat?
Large, thin TVs can break easily. The major reasons you should never carry your TV laying down are vibrations and a lack of screen support. The majority of manufacturers want the TV to stand upright, which is why most have sturdy Styrofoam corners.
If you’d want to have peace of mind throughout this procedure, you can let our Geek Squad or our delivery partners handle getting it to you if you’d bought it from Best Buy. More information about our free shipping and delivery choices is available here.
You moving, sir? To find out how to move your TV to a new house, visit our Best Buy Movers Guide!
You’re welcome to view a few of the unboxing films for some of our most well-known companies right here.
How would you put a 65-inch TV in your car?
- If the original packaging materials are not accessible, wrap the TV’s screen with bubble wrap and then cushion the corners with foam or more bubble wrap. After that, put the TV in the proper box for shipping.
- Label the top and front of the TV in big letters on the exterior of the box after securely taping it. Additionally, make sure the package is clearly marked “FRAGILE” in multiple locations.
- Slide the TV into the original box after fitting the original box inserts around the side and back of the TV.
You can consider the gadget like furniture and use a moving blanket to transfer a flat-screen TV if you need to figure out how to do it without a box.
- Place the TV flat in the middle of the blanket with the screen side facing up. Then, as if wrapping a gift, fold each side of the blanket in and over the screen.
- Stretch wrap the bundle from top to bottom and once more from side to side after taping the bundle’s edges.
- A piece of foam should be placed in each corner of the TV. Use packing tape to affix.
- Wrap two to three layers of bubble wrap around the TV’s center, starting at the top, to create a barrier that will protect the screen.
You should be able to pack the TV without the original box and still have it arrive securely using this technique.
Without a box, how can you transport a TV in a car?
Yes, however it is not advised. The best way to pack and transport a TV safely is with a TV moving box because it offers exterior protection, inside cushioning, and immobility. If moving a TV without a box is absolutely necessary, we advise wrapping it in at least three inches of Large Enviro-Bubble, wrapping it in a furniture pad, and carefully squeezing it between two big pieces of furniture.