Shock and strut replacement might be risky if you don’t know what you’re doing. Before attempting to disassemble your car, please read these guidelines to ensure the project’s efficiency and safety.
In This Article...
Spring Compressor
Many automobiles have integrated springs inside the shocks and struts, which, if removed improperly, could cause you harm or damage your car. In these situations, you’ll need a spring compressor to safely disassemble everything.
Your neighborhood auto parts store may rent out spring compressors, but it’s crucial to know how to operate them. You must exercise caution because this step is crucial to changing shocks and struts. If you’re unsure about removing the springs, you might want to think about taking your car to a repair.
Raise the Vehicle
When all of your components and tools are prepared, you should use a car jack to raise your vehicle one side at a time. To maintain stability once it is upright, put a jackstand behind the front wheel. Otherwise, a lift is available.
Prior to trying to loosen anything or climbing beneath the vehicle, just make sure it is secured.
Remove Old Shocks and Struts
You must first remove the wheels. Next, using your spring compressor, search for the three bolts holding the shock or strut in place at the bottom. These bolts should be loosened, but not yet totally taken out.
Another bolt inside the engine compartment secures the top of the shock or strut. To loosen it, use an impact wrench with a socket extension. Your shock or strut should come free once you’ve managed to get this loose and finished removing the other bolts.
Installing New Shocks and Struts
You can just swap in the new shocks and struts after removing the old ones. Make certain that all of the bolts are tightly tightened. To perform this, you most likely need a torque wrench.
How many hours of labor are required to replace struts?
It takes one to two hours to replace a strut. Any replacement work for suspension parts may come with a guarantee and a general safety evaluation from the mechanic. By doing it yourself, you can completely avoid paying for labor to replace the struts. All you actually need to do is purchase the replacement struts and the equipment required to raise your car. The old strut is then taken off, replaced, and the process is repeated, at least for the other side, while lifting the automobile.
All of your wheels should have strong suspensions to reduce wear and tear over time and save you money. To that end, it’s crucial to research the kind of struts that will fit your car and pick high-quality ones.
What is the price of replacing all 4 struts?
Depending on the brand and model, struts typically cost $150 to $450. Usually, it is necessary to replace both struts at once. A pair of struts will cost you between $300 and $900 to replace. It can take several hours to replace a strut.
How can I tell if my struts need replacement?
Shocks and struts’ Warning Symptoms
- erratic behavior at motorway speeds.
- As it turns, the vehicle “tips to one side.
- During forceful braking, the front end drops more than is normal.
- When accelerating, stoop from the rear.
- severe bouncing of the tires.
- uncommon tire wear
- leakage of fluid from shocks or struts’ outside surfaces.
Are struts and shocks interchangeable terms?
You’ll frequently hear individuals use the terms “shocks” and “struts” interchangeably. Shocks and struts, however, are two separate components with different purposes. Both of these components aim to improve the ride and handling of your car, but they do so in different ways. While struts are a significant structural element of the chassis and suspension system, shocks are discrete parts of the suspension system.
Do I require an alignment after strut replacement?
Here are the responses to the query in brief
After changing shocks and struts, do you require an alignment? Yes, if the automaker advises an alignment following a replacement. Yes, if you made any modifications to your suspension that did not adhere to the manufacturer’s instructions.
What else has to be done when struts are replaced?
It’s crucial for driving safety to replace your shocks and struts when they become worn out in order to avoid harming other parts of your car, such as the tires and suspension.
Various safety features are included in today’s cars to help with control, stability, and accident prevention. You are kept safe by a combination of systems including automated braking, anti-lock brakes, stability control, and traction control. In an emergency situation, your shocks and struts may not function effectively if they are in bad condition.
Getting Your Shocks & Struts Replaced
Whether you observe any of the aforementioned symptoms, get your alignment checked, or put on new tires, the best way to know when to repair your shocks and struts is to have a skilled technician check your suspension. Get your car’s suspension inspected at the very least once a year.
Replace front or rear axle shocks and struts in pairs at all times. It is even better to replace the shocks and struts on all four wheels at once. This keeps the vehicle’s handling and responsiveness on both sides uniform and dependable.
We always advise obtaining an alignment as well, following any suspension work. Wheel alignment of your car could also vary if your suspension is altered. Additionally, even little adjustments to wheel alignment can have expensive long-term effects (accelerated tire wear, more suspension problems, difficult handling).
How lengthy is strut replacement?
Is the stop of your vehicle taking longer than usual? Is it strangely bumpier? The symptoms definitely indicate that your struts have failed, thus I believe it is time to replace them. Fortunately, you can either do it yourself or hire a professional to replace them.
Most professional mechanics agree that changing struts typically takes one to two hours. As long as you have prior mechanical experience and perform the procedure correctly, the expected time is the same even if you choose to replace them on your own.
The ability to manage and control the vehicle may be compromised if struts are not replaced in a timely manner.
What is the price of replacing the shocks on a Nissan Altima?
Best in Automotive Repair Replacement shocks or struts for the Nissan Altima suspension typically cost between $782 and $843. While parts are priced at $550, labor expenses are predicted to range from $233 and $294. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account.
Struts are either in the front or back.
Struts are normally fitted in connection with the front wheels, although they can also be put at the rear wheels, depending on the configuration and driveline of a vehicle. There are various strut types, just like there are various automobile types.
How far should struts last before failure?
What do shocks and struts in cars do? What is the lifespan of shocks and struts? Most drivers probably don’t give their car’s shocks and struts much thought because they don’t need to be replaced frequently like oil or other parts do. Although shocks and struts have quite distinct purposes, they both support the weight of the vehicle and contribute to overall stability. Although they serve the same purpose, the parts cannot be joined to build a vehicle or used interchangeably. This implies that a car will typically have either one or the other. Some automobiles will feature shock absorbers in the back and struts up front.
Ask a Mechanic How Long Do Shocks and Struts Last
What is the lifespan of shocks and struts then? Under optimal driving conditions, shocks and struts can typically last 5–10 years or 50,000–100,000 miles. The lifespan of these parts can be impacted by a variety of variables, including the manufacturer, poor roads, big loads, towing, severe braking, and aggressive driving. It is preferable to start routinely checking these components after 40,000 miles or when the car starts to bounce, sag, have longer stopping distances, or exhibit other suspension issues.
If you suspect your shocks or struts may be damaged, you should have your car checked out right away. Both shocks and struts have the potential to produce dangerous circumstances like bouncing or shoddy braking that can result in accidents. Front struts, as opposed to shocks, are an essential component of the steering system and their failure could seriously impair steering. The car will probably not be drivable if these components entirely fail.
How much do shocks and struts cost to labor?
Replacement labor fees for shock and strut assemblies can run from $150 to $300 per unit. In order to offset the increased operating expenses of operating a physical facility, auto repair companies charge higher labor prices.
How loud does a damaged strut sound?
Bad strut noises are sometimes reported as hollow pounding or clunking noises. The noise is often made when a car crosses a rough patch of pavement. The top of the majority of front strut assemblies also houses a bearing.
Can I still drive with faulty struts?
A strut functions by absorbing the bounce as your automobile travels over road ruts. Your car’s front-end struts are also essential for steering and alignment. It will be dangerous to drive with a damaged strut in an emergency and would be quite uncomfortable for you and your passengers. Additionally, it might harm other parts of your car.