Select SYSTEM SETTINGS from the menu on the display screen after pressing the SETTING button. To access the CLOCK SETTINGS mode, select CLOCK next. Then, to change the time, press and hold the HOURS or MINUTES key while moving the joystick to the left or right.
In This Article...
How is the clock changed in a 2009 Nissan Versa?
1. To activate the clock set mode, press and hold the CLOCK button for longer than 1.5 seconds. 2. To change the time, use the SEEK/TRACK/FILE button.
How is the clock changed in a 2007 Nissan Quest?
Once more, it’s daylight saving time! It’s time to reset your watches, clocks, and the clock in your automobile. It’s simple to forget how to adjust the clock in your Nissan because we only do this twice a year in San Diego. To review how to set the clock in a Nissan, see the video below.
When a vehicle lacks a navigation system, how can you access the clock settings?
To turn on or off the clock display on the screen, touch ON-SCREEN CLOCK.
Important safety information, system restrictions, and other operating and feature details can be found in your NissanConnect Owner’s Manual.
My Nissan Altima from 2006 has to be reset.
m Wayne Powell An emission-related error may be the cause of the SES light being on. If you follow the directions in your handbook or those found at the links below, you can get the codes without leaving your car because it can figure out why the engine light is on. After you have obtained the code(s), the first link can inform you of their identity.
Procedure for ECM diagnostics and reset:
– After three seconds, turn the ignition key to the ON position. (Never start the vehicle.)
– In less than five seconds, fully depress and release the accelerator pedal five times.
– Hold off for exactly seven seconds. Until the SES light flashes, depress the accelerator pedal completely for ten seconds.
– Let go of the gas pedal, then begin counting the flashes to get the four-digit trouble code.
The first digit of the code is indicated by long flashes (0.6 seconds); record the first digit by counting the blinks from one to nine. Zero is shown by ten blinks.
The following three numbers are presented one after the other in the same order, but with faster blinks (0.3 seconds) and a 1.0-second break in between each digit.
Use the links below for further explanation if necessary. Some auto parts retailers, like as Pepboys, Nappa, Advanced Auto Parts, etc., also provide free code reading services. These men are often quite competent and can direct you to the problem. Good fortune.
How does a 2006 Nissan Sentra’s clock work?
The dashboard clock
- For 2 seconds, hold down the CLOCK button.
- When the hour flashes on the screen, press CLOCK. The hour can be set using 2 or 1/4.
- Clock should be pressed until the minutes flash on the screen. You can set the minutes using 2 or 1/4.
- To exit the configured mode, press CLOCK.