Nowadays, a remote keyless entry device is standard on all new Nissan vehicles. With this method, you can start your car’s engine and unlock your door without really using a key. It’s convenient to have a Smart Key as Nissan does, but what happens if the battery dies? It can be difficult to choose the micro-battery size to buy for your Nissan intelligent key because there are so many different sizes available. Fortunately, we’ve looked into batteries and the replacement procedure to give you an answer here.
The CR2032 3-Volt battery is the same size for all Nissan Smart Keys. Use these instructions to replace the battery in your key fob:
- Press the tiny button on the rear of the fob to remove the valet key.
- Gently pry open the fob with a screwdriver or card until it clicks and separates into two halves.
- Replace the battery after removing the old one.
- Replace the valet key and put the key fob back together.
Here is a summary of Nissan Smart Key battery sizes and how to change them. However, there is more to understand about this procedure. We will go into more depth on how to change the battery in the following sections of this essay. We’ll also go over programming the Nissan key fob, how long the batteries should last, and whether or not they’re covered by a warranty.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
In This Article...
How much does a Nissan key fob battery change cost?
Although replacing the key fob battery on your Nissan model is a simple procedure, it does require handling delicate and sensitive electronics. Make sure to use gloves to prevent harm to the key fob (latex or non-latex substitute). The CR2032 3V battery is used in the Nissan key fob. Typically, a multipack of them costs less than $5 USD. A tiny flathead screwdriver is also required.
- Find the open slot between the front and rear portions of the key fob on its top.
- Slide the little lever to release the emergency key.
- Delete the emergency key
- Nissan key fob flipped over to the rear
Can my Nissan be started without a key fob?
However, if the Nissan key fob battery alone needs to be replaced, your Nissan might still start even with a dead key fob battery: Put the key fob in the port if your Nissan car, truck, or SUV has one, then push the START/STOP button while tapping the clutch or brake pedal.
How long does the battery in a Nissan key fob last?
The battery in your car’s fob or remote will eventually need to be replaced, just like any other battery. A car fob battery should typically last three to four years. In addition, there are several indicators that will let you know when your fob battery is running low.
Signal strength loss is the initial symptom. The majority of contemporary fobs can communicate with your car up to 50 feet away. But as your battery ages, the signal’s intensity and range will decline. Another indication that your key fob battery needs to be changed is that you are having to push buttons to lock and unlock doors repeatedly.
What do I do if the battery in my Nissan key dies?
You can resume using the key fob to start and enter your car once the battery in your Nissan smart key is replaced. The steps to follow to change the battery in your key fob are as follows:
- When the battery died, you could still enter your Nissan by using the hidden key.
- Remove the old battery and the key casing.
- Place the negative side of the CR2025 battery upward before replacing it.
- Reassemble the key fob and give it a try!
How do I find out which battery my key fob uses?
Open your fob to find the battery your automobile key fob uses. There will probably be an engraving that starts with CR followed by a string of digits if the item contains a battery. Check your owner’s manual or search online for your car’s make, model, and year without a battery or engraving.
Will changing the battery on my key fob make it work again?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. A key fob replacement or even automobile door lock repair may be necessary if it stops operating after a battery change.
How do I know if changing my key fob battery will fix my car key?
When the key does not function under any conditions, it is likely that the car key fob has a dead battery. On all door locks, all buttons have the same lack of effectiveness. When buttons are pressed, no lights illuminate, suggesting that no signal was transmitted. The backup fob, however, functions flawlessly.
What do I do if my key fob is not working after a battery change?
Before you replace the automobile remotes if your key fob still won’t work after a battery change, make sure your locks are operating properly. Additionally, make sure you didn’t unintentionally deprogram your keychain.
Can you fix a key fob not working after a battery change?
Although replacing the remote’s batteries might be the quickest repair for the problem, this is by no means your only option. Check to see if the key fob or the vehicle is the root of your issue. After determining the root cause, fix or change the damaged components.
If I change the battery, do I need to reprogram my key fob?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
Are key fobs replaced by AutoZone?
AutoZone does offer key duplication services for cars made by Toyota, Ford, Honda, Dodge, GMC, Mercedes, Kia, and other manufacturers. These services include key duplication, transponder keys, key fobs, and vehicle key blanks.
DIY Key Fob Programming
You might be able to program a replacement yourself, depending on the make and type of your vehicle.
The steps for programming a key fob yourself can differ: Owner’s manuals from certain automakers include instructions. In many circumstances, information can be available online. The problem is that in order to complete the process quickly or at all, you might require two functional key fobs.
Therefore, it is wise to acquire and set up an extra remote before you require it. Additionally, it’s a wise move because most used-vehicle buyers, particularly auto dealers, would pay extra for a car that has at least two functional sets of keys or key fobs. Therefore, having a spare key will not only be useful when you need it, but it will also benefit you in the long run.
After-Market Key Fobs
You may be able to buy an after-market key fob via a locksmith or online if your automobile is more than five years old. These sorts of fobs range in quality, but they are less expensive than other options.
Locksmith
If you have the option of receiving your replacement key from a locksmith or the dealership, the latter may be less expensive. Before making a choice, be sure to inquire about prices with your nearby vehicle dealership.
What happens if the battery in my key fob dies while I’m driving?
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
Even though you’ll need to go to a general store or pharmacy to get the battery, replacing the battery in your key fob simply takes a few minutes if you’re pressed for time.
Why not take the time to renew your auto insurance at the same time as you’re replacing the batteries in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.
Will a dead key fob deplete the battery in my car?
We frequently receive inquiries like these at the shop. Yes, it is the correct response. Your key fob can eventually deplete your battery if you keep it in your car when it is not in use. Even when not in use, the key fob continuously transmits a signal to the vehicle, which consumes a tiny amount of electricity. So, if you keep your key fob in your car for a long time, the battery will ultimately die. If you find yourself in this predicament, you might try using a jumper wire or a portable battery pack to jump start your automobile.
Additionally, it may not be a good idea to leave your key fob in your car overnight or even just hanging nearby. The key fob may speak with your automobile if it is too close, which could drain the battery.
My Nissan key fob needs to be reset.
the ignition with the key in the lock position “ACC. Remove the key from the ignition and turn the ignition off. Repeat this procedure six times quickly. The emergency lights should flash twice after you’ve finished. Reinstall the key in the ignition and switch to “ACC once more
How is a Nissan key fob push start reprogrammed?
Any button on your keychain fob should be pressed and held until the door locks start to flash. It ought to take three seconds or so. Release your programming button as soon as the lock lights stop flashing. A continuous light that indicates that the key fob has been programmed should then appear.
Why won’t my Nissan key fob operate?
You should change the battery in your Nissan smart key to avoid having to repeat these steps. How to do it:
- Take out the secret key you inserted to open your Nissan.
- Making note of the location, remove the key housing and then remove the outdated battery.
- Make sure the CR2025 battery’s negative side is pointing up and in your direction when you swap it out with a fresh one.
- Reassemble the key fob and check its functionality after.