How Much Oil Does A Nissan Titan Take?

Nissan / By

We first need to know exactly how much oil your Nissan Titan needs before discussing different types of oil and how to replace your oil.

Your Titan’s 5.6-liter V8 engine requires 6.9 quarts, or 6.5 liters, of oil to function correctly. Be advised that the measurements 5.6 liters and 6.5 liters cannot be used interchangeably.

The 5.6-liter number indicated with your engine is your engine’s displacement, or the amount of room the cylinders occupy in your engine. The 6.5-liter number is the oil capacity, which is how much oil you must pour in during each oil change.

What kind of oil does a Nissan Titan need?

You can just go buy the first 7-quart container you see on Amazon now that we’ve discussed how much oil your engine needs, right? Wrong!

You’ll need an oil that satisfies a few different criteria because not all oils are created equal. Nissan recommends using SAE 0W-20 oil in the Titan.

The numbers 0 and 20 represent the viscosity, or thickness, of the oil at various temperatures. Winter is denoted by the W, and the 0 preceding it informs us that this oil retains a low viscosity at 0 degrees Fahrenheit. The 20 also informs us that the oil is still thin even at the 212F operating temperature of your engine.

Because it will function well even in cold conditions and be thin enough not to block your engine, you want an oil with these grades. Here are our top three recommendations if you don’t know where to start your search for the ideal oil:

How much oil does a Nissan Titan from 2007 consume?

Total engine oil volume for the 2007 Nissan Titan is 6.6 quarts, or 6.25 liters. When it’s time for an oil change, you’ll probably need to purchase a full 7 quarts of engine oil as it’s normally sold by the quart.

What kind of oil does a 2007 Nissan Titan need?

You’re prepared to run out and buy some oil now that you know how much your Nissan needs, aren’t you? I guess not yet. The kind of motor oil your Titan uses is just as crucial as the required amount. The improper kind of engine oil can be fatal because not all engine oils are created equal.

You’ll require synthetic oil with a viscosity rating of either 0W-20 or 5W-30 for a 2007 Nissan Titan. Oil thickness is determined by its viscosity. It’s crucial to get oil with a compatible viscosity; otherwise, you’ll have a variety of issues.

When examining an oil’s viscosity rating, you’ll find two digits in the format XW-Y, each separated by a dash. The oil’s viscosity at 0°F is indicated by the first number next to the W, while its viscosity at 212°F is indicated by the second number.

If you’re unsure which brand to choose, think about these three possibilities:

The original is always a good option: Nissan produces its own motor oil. If you are unsure which oil to use, try OEM Nissan 0W-20 Engine Oil.

Something different: Valvolines Advanced Full Synthetic 0W-20 Motor Oil is an alternative if you’d rather not use Nissan’s oil.

For Titans with high mileage: Castrols GTX 5W-30 High Mileage Synthetic Blend Motor Oil, which is suitable for older engines, may be used if your 2007 Titan has more than a few miles on it.

Exactly how much oil does a 2018 Nissan Titan SV require?

The engine oil capacity of your 2018 Nissan Titan is 6.9 quarts. That implies that after draining the old oil, you should add that much engine oil.

A 5.6L V8 engine powers the 2018 Nissan Titan. This enormous engine has a towing capacity of almost 9,000 pounds and 390 horsepower. Keep in mind that the 5.6L has nothing to do with the Titans engine’s oil capacity. The engine displacement, which represents the volume the cylinders of the engine occupy, is represented by that number.

What kind of oil does a 2018 Nissan Titan need?

What kind of engine oil you should use in your Nissan Titan is the next issue.

You should use either fully synthetic oil or a synthetic blend for a 2018 Nissan Titan. Specially designed synthetic oil lasts longer and performs better. An oil that combines synthetic and conventional oil is called a synthetic blend.

You need an engine oil that is either 0W-20 100% synthetic or 5W-30 synthetic blend, to be more precise. These figures are all used to represent the viscosity of the oil at various temperatures. The first value, which is next to the letter W (for winter), represents the viscosity at low temperatures. The second value is the viscosity at the operating temperature of the engine (around 212 degrees Fahrenheit).

Here are some suggestions for the kind of engine oil that your 2018 Nissan Titan should use:

How can the oil light on a 2006 Nissan Titan be reset?

  • Locate the Maintenance option using the INFO button, then pick it by pressing ENTER (some displays will have a MAINTENANCE button instead of an INFO button in which case you will only need to push the MAINTENANCE button to proceed to the next step)
  • Engine Oil can be selected by pressing ENTER after you’ve highlighted it with the UP/DOWN arrows or the middle knob.
  • To pick the Reset Distance option, click ENTER after highlighting it with the UP/DOWN arrows or turning the center knob once more.
  • The mileage ought to be set to 0.
  • To return to the previous screen, use the control panel’s BACK button.
  • For the tire and oil filter, repeat steps 3-6. (if the tires were rotated during service)

2004 to 2012 (with navigation)

  • the ON position on the ignition switch
  • When you press the TRIP button under the display, the Options menu will appear.
  • Press ENTER on the joystick after using the center joystick to navigate to the Maintenance menu.
  • Using the joystick, pick Engine Oil, then press ENTER to choose.
  • Highlight Press ENTER after using the joystick to reset.
  • Ensure that 0 is displayed next to the mileage.
  • If the tires were rotated, follow steps 3-5 again.
  • Turn the INFO knob (found on the instrument cluster) to highlight the Setting menu and cycle through the various modes.
  • By turning the INFO knob, access the Setting mode.
  • After highlighting the Maintenance option with the INFO knob, choose the choice by pressing the INFO knob.
  • Turn the INFO knob to highlight the desired field (Engine Oil for an oil change), then press the INFO knob to input the entry.
  • Turn the INFO knob to highlight the Reset option, then press the INFO knob to choose it.
  • Turn the INFO knob to select the mileage, then press it to reset.
  • If tires were rotated, repeat steps 4–7 for the oil filter field and the tire field.