Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.
Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If so, a 4 hour time limit would likely be more appropriate than a 2 hour one.
Download the Jerry app to see if you’re overpaying for auto insurance as you wait for the technician to finish. We warrant that replacing your starter will be much quicker!
Simply spend a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest bargain, they’ll create competitive quotations from top insurance companies. When a customer shops with Jerry, they often save over $800!
In This Article...
Exactly why won’t my Nissan Altima start?
I’m sorry to hear that your Nissan Altima is having difficulties starting. Your Nissan Altima won’t start for a few different reasons. The most frequent causes are a dead battery, a broken alternator, or an issue with the engine starting.
Typically, an electrical component of the automobile, such as a dead battery or a damaged alternator, is to fault if your Nissan Altima won’t start.
If you think the battery is to blame, you can check its voltage at home using a multimeter to validate your suspicion. Your automobile battery is alright if you receive 12 to 13 volts, and the problem is somewhere else. The battery needs to be replaced if the voltage falls below 12.
The following are some more frequent causes of a Nissan Altima not starting if the battery is in good condition:
- worn-out ignition plugs
- faulty alternator
- Key fob battery failure
- inadequate alternator
- defective starter motor
- Battery deterioration
- fuel pump malfunction
You should take your car in for service right away to address the problem and stop more harm from occurring to your vehicle.
While taking your car in for maintenance is a terrific method to keep safe, getting excellent car insurance coverage at a reasonable price is the greatest way to make sure you’re covered. Jerry can assist!
How much does a beginning cost?
A starter’s component rebuild could cost anything from $50 to $350. The price of a new starter can range from $80 to $350. A skilled mechanic will cost you between $150 and more than $1,100 to replace or rebuild your starter.
How is a starter tested?
Connect the solenoid (smaller wire) connector on the starter and the battery positive terminal on the remote starter switch, then turn the switch. If nothing transpires, your starting is subpar. If the starter engages, the electrical system is at fault.
A automobile solenoid is what?
Depending on the make and model of your car, a solenoid may be located in several places. The starting motors of most cars are where solenoids are installed and coupled to other “starter components” such the starter gear and starter control terminal.
So tell me, what precisely is a starter motor? It functions as an electric and magnetic motor that is attached to your car’s battery and is intended to take in low current power and start rotating the appropriately named starter gear before turning again to start a larger electrical reaction and (in time) your full engine.
Some vehicles, meanwhile, have their solenoids installed somewhere else in the engine bay. The solenoid is always situated between the ignition and the engine, however for further information on the precise placement of your solenoid with your make and model, consult your owner’s handbook.
How long does it take to fix a starter?
Its replacement should take between two and four hours. Some starter motors are difficult to access, which might lengthen the process and increase the cost of your final bill.
How long does it typically take to fix a starter?
Due to the complexity of beginning motors, a starter replacement typically takes between two and four hours to accomplish. If your automobile has a starter that is easily accessible and you bring it to a repair who is worth their salt, your wait time should be closer to 2 hours than to 4.
You can always be sure that you got the greatest value possible since CoPilot scans your neighborhood and notifies you if there is a better deal on a comparable vehicle nearby. The best approach to purchase a car is through the CoPilot app.
How can I tell if the starter on my Nissan Altima is damaged?
To start your Nissan Altima, the starter motor turns the flywheel, which produces electricity. Your Altima may not start if the starter motor is damaged or malfunctioning. A faulty starter motor typically makes a clicking or grinding sound made of metal on metal. These are important warning signs that your starting motor needs to be changed.
Why do all the lights come on yet my car won’t start?
If your headlights work but your car won’t start, your battery is charged but the starter or ignition isn’t working properly. A starting engine can be jumped using a charged battery if the starter or ignition is the issue.
What signs point to a problematic starter?
Still, keep an eye out for these seven indications that your starter is failing.
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #5: Smoke.
- #6: The starter engages but the engine won’t turn over.
- 7. Battery
What transpires when a car’s starter fails?
It frequently makes a grinding noise when the starter drive gear is worn out or not engaging properly. This sounds a lot like the sound you make when you unintentionally turn the ignition switch back on after starting your car. The engine flywheel could be harmed if the grinding symptom is ignored.
How may a starter malfunction?
The most frequent causes of starter failure are natural wear and tear or operator (or installation) mistake. The magnetic “brushes” that ride around the armature inside the starter might become worn down over time. The starter solenoid, which is located slightly outside the main casing and permits electricity to pass through the starter, is susceptible to mechanical sticking and arching as well as being exposed to damagingly high temperatures. It is not long for this world if you ever see or smell smoke coming from the starter, therefore you should get in touch with a technician right away.
Can you change a starter on your own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cable—the substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
How may an automobile starter be tested without removing it?
The engine must be spun or cranked by the starter. If it does, the wires, connectors, or relay are the cause of the issue. If not, start the engine and use the black/negative jumper cable to establish a connection between the drivetrain and the battery’s negative terminal as a ground. Connect the red cable to the positive terminal of the starter.