If the vehicle has a switch called the Passenger Airbag Cut Off Switch, it can be used to deactivate the passenger airbag (PACOS). When the passenger door is open, you may access the switch for the passenger airbag on the passenger side of the instrument panel. Verify that the switch is set to the appropriate position.
In This Article...
Can the front passenger airbag be turned off?
However, if the vehicle has a Passenger Airbag Cut Off Switch, the passenger airbag can be turned off (PACOS). To avoid any potential faults, you typically need to turn off the ignition before disabling the airbag. Typically, the PACOS is found on the passenger side of the dashboard.
Why are passenger airbags deactivatable?
The mechanism may automatically switch off if the bag is heavy enough to activate it but not safe enough for the airbag to deploy. There may be a problem with the system if there is an adult seated in the front seat and the passenger airbag light is still lit up as “OFF.”
How can the passenger airbag on a Mitsubishi Eclipse cross be disabled?
Before installing the child seat, you will need to perform this manipulation, especially if you want access to the glove box. In conclusion, you must manipulate your Mitsubishi Eclipse with the engine off and the key not in the ignition.
Insert the airbag in the Off position:
It should be active by default in the “We” position. Then he will undoubtedly take the form of a lock, which you must disengage by inserting the key from your Mitsubishi Eclipse and turning it up a notch. Or it might be in the shape of a button, in which case it will only be necessary to turn it off.
How do I know if the airbag is deactivated on my Mitsubishi Eclipse?
Start your car’s engine after the deactivation process is complete. As a general rule, it would be best to see the airbag disabled warning light or even a message telling you of the change if the modification was successful.
Install the car seat facing away from the road on the passenger seat of your Mitsubishi Eclipse as soon as this is finished. You should be aware that facing the road will be especially unwise because the baby’s bone structure is still delicate and won’t be able to withstand the shock of impact. Your child will be safer when they are turned.
To deactivate the equipment, you will need to travel to a garage. It is imperative that the equipment be off in order to protect your child if you experience any difficulties executing this type of manipulation.
Put the active airbag back on Mitsubishi Eclipse:
In order to ensure more than only passenger safety, it will be crucial to reactivate the airbag when you remove the baby seat from the passenger seat.
Reverse the procedure for it with the ignition off and the engine off. In other words, power on your Mitsubishi Eclipse after setting the airbag button to “On.” You should see a message on the console or the indicator light turn on to signify that it will be restarted.
If the airbag warning light ever gives you trouble, especially if it stays on all the time, you can read the article below for more information: Airbag warning light for the Mitsubishi Eclipse.
If there is a child in the front seat, do you switch off the airbag?
Children under the age of 12 “are the most at danger when the frontal airbag deploys in a crash,” claims Child Seat Safety in a Facebook post. The article also emphasizes that it is legally required to deactivate the airbag before installing a rear-facing kid seat in the front passenger seat.
How is the passenger airbag activated?
When an adult-sized individual is spotted in the passenger seat, the front passenger air bags will immediately deploy.
The illuminated word ON on the PASSENGER AIR BAG control on the center console will indicate this. Even with an adult-sized person seated in the passenger seat, the air bag may not deploy. The word OFF will appear on the control in this situation. Do not operate the car if the air bag control cannot detect the person in the passenger seat. Do the following instead:
Once the air bag control has signaled ON after starting the car, keep the passenger and their seat in place for one minute.
The air bag will remain on for one minute after which the passenger may modify their seat and seating posture.
What weight triggers the passenger airbag to deactivate?
If there is less than about 65 lbs (29 kg) on the seat, the front passenger’s airbag will not deploy (the weight of an infant or small child).
How should the passenger airbag light be set?
Only when there is an issue with the airbag system in the car should the airbag warning light remain illuminated. The car’s computer runs a system check each time you turn the key. In order to demonstrate that it is functioning, the light briefly illuminates before turning off.
How does a Mitsubishi ASX’s passenger airbag deactivate?
To gain access to the glove box, for instance, we must perform this operation before installing the child seat. Then, you must perform the manipulation with the Mitsubishi Asx’s engine off and the key not in the ignition.
It ought to be in the “We” position by default and be active. Then it might take the shape of a lock, which you’ll need to disable by inserting your Mitsubishi Asx key and turning it up a notch. You only need to place it in the “Off position” if it has a button-like form underneath.
How do I know if the airbag is deactivated on my Mitsubishi Asx?
You can start your car’s engine after you understand that it has been deactivated. In general, the airbag deactivated warning light or even a message telling you of the change should be visible if the procedure was successful.
Don’t be hesitant to install the rear-facing car seat on the passenger seat of your Mitsubishi Asx once this is finished. Be warned that facing the road will be especially risky because the baby’s bone structure is still very delicate and won’t be able to withstand the shock of impact. Your child is more safeguarded when they are turned around.
For the protection of your infant, it will be crucial that this equipment is no longer in operation, thus if you are having problems doing this type of manipulation, you should visit a technician to have it deactivated.
Put the active airbag back on Mitsubishi Asx:
In order to provide greater passenger safety, it will be crucial to reactivate the airbag when you remove the child seat from the passenger seat.
Perform the reverse manipulation while driving an automobile with the ignition turned off. That is, turn on your Mitsubishi Asx first, then toggle the airbag switch to “On.” You should notice a message on the instrument panel or the warning light turn on to confirm that it will be revived.
If you experience issues with the airbag warning light, such as if it remains illuminated all the time, you can read the article below for more details: Airbag warning light for the Mitsubishi Asx.
How do you deactivate the airbag in a Smart vehicle?
The airbag key switch is on the dashboard’s extreme right side. Turn your key counterclockwise to the off position after inserting it. The “passenger airbag off indicator light” should be visible. Put the key into the divot and spin it clockwise to the ON position to turn the airbag back on.