You must restart the tire pressure monitoring system after adjusting the tire pressure or rotation (TPMS). The Mitsubishi Outlander’s TPMs can be reset in the following ways: 2014 2015 2016 2017 2018 2019 2020
In This Article...
Verify that the car is totally stopped
Put the gearshift lever in the N position (M/T) or the P position (A/T) while using the hand brake.
- The tire placard’s suggested tire pressure should be adjusted.
- Without starting the engine, turn the ignition to the ON position.
Press the Engine Start/Stop button twice without touching the brake pedal if your car has one.
- Until the SETTING MENU is visible on the cluster display, repeatedly press the button.
- In order to access the menu, hold down the button.
- the TIRE RESET location
- To perform the TPMS reset, press and hold the button.
Press the button until a buzzer sounds and the slow-flashing tyre pressure warning light appears.
Drive your vehicle until the warning light turns off after starting the engine.
How is the low tire pressure indicator turned off?
Don’t start the car; just turn the key to “on.” Till the tire pressure light blinks three times, press and hold the TPMS reset button. Press the button again to start the vehicle. Within twenty minutes, the light ought to turn off.
The low tire pressure light won’t turn off, why?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one tire on your vehicle may not be inflated to the appropriate level by at least 25%.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
Can the TPMS light be turned off?
On the gauge cluster of your car’s dashboard, a horseshoe-shaped emblem with an exclamation point lights when your tire is underinflated. The tire pressure monitoring system is the piece of equipment that generates this signal (TPMS).
Sensors provide the TPMS with data on the air pressure level. The air pressure sensors inside your tires or the anti-lock brake system’s wheel speed sensors may be used by your car’s TPMS, depending on the model.
The TPMS reset button is where?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
Why are my tires in good condition but my tire pressure sign is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
We’ve talked about some additional aspects of automobile maintenance in this piece. Read these articles if you have some time:
What does Mitsubishi Outlander’s TPMS Service Required message mean?
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
How long before the tire pressure light appears?
After a few kilometers of driving, the light may turn off if the tires are adequately inflated. After around 10 miles, if the light still remains on, it may be necessary to reset the TPMS as instructed in the owner’s handbook of the car.
Is driving permitted while the tire pressure light is on?
You should be able to find our store or an air pump if the light just came on and you need to get there. However, it is unsafe to keep driving while the light is on. This is why: When you drive your car with low tire pressure, you accelerate the premature and severe tire wear.