The automatic speed control technology known as cruise control allows you to maintain the same
driving velocity It can be turned on at speeds of up to 40 km/h (25 mph).
CAUTION:
Deactivate the cruise control if you don’t want to maintain a steady speed while driving.
work to ensure safety.
When the road conditions prevent you from staying in one place, do not utilize the cruise control.
the same speed, such as in congested areas or on twisting, icy, or snowy roads,
damp, slick, or going downhill very quickly.
If you engage cruise control while shifting into neutral without engaging the clutch
Initially, the engine will run excessively quickly and could sustain damage.
NOTE:
used to raise the target speed and to end constant-speed driving
to reset the speed to its initial value.
Press each cruise control switch appropriately when using the cruise control.
switch.
If two or more of the cruise controls are turned off automatically, the
Several control switches are simultaneously depressed.
When the cruise control ON OFF switch (A) is depressed, this indicator will turn on.
to activate the cruise control feature.
Press the ON/OFF switch very lightly (A).
If the ignition switch is in the OFF position and the cruise control is activated,
Automatically, cruise control will activate, and the CRUISE control indicator
the following time you start the engine, illuminate.
The cruise control memory data will not function if the battery voltage is insufficient.
shall be deleted. Therefore, it’s possible that the CRUISE control indication won’t turn on while
you turn the engine back on. In this case, you must again press the ON/OFF switch to
press the cruise control button.
2. While traveling at the chosen speed, press the COAST SET switch (B).
The speed that was set as the cruising speed when you released the COAST SET switch
speed.
Switch ACC RES The speed can be increased by holding down the ACC RES switch (C).
will progressively rise. Release the switch once you’ve reached your preferred pace.
You’ve now chosen your cruising speed.
Press the ACC RES switch (C) for less to gradually increase the speed.
than one second and then let it go. Pressing the ACC RES switch (C) causes the
There will be an increase in speed of about 1.6 km/h (1 mph).
Once you’ve reached the required speed, press the COAST button.
SET switch (B) and briefly release the switch to change the desired cruising speed.
speed.
SET COAST switch While traveling at high speeds, hold down the COAST SET switch (B).
You will progressively slow down (coast) to the selected pace.
Release the COAST SET switch once you’ve reached the desired speed. Your preferred speed
has been set.
Press the COAST SET switch (B) to gradually reduce the speed
Release it after less than one second. When you flip the COAST SET switch (B),
There will be a 1.6 km/h speed reduction (1 mph).
Push the COAST button after using the brake pedal to turn off the cruise control.
SET switch (B) and briefly release the switch to change the desired cruising speed.
speed.
In the usual manner, depress the gas pedal. Upon depressing the pedal,
Your speed will increase once more.
To reduce speed, apply the brakes. Returning to the predetermined speed,
ACC RES must be pressed. See To restore the specified speed.
You can disable the cruise control by doing the following:
Any of the following methods can be used to automatically turn off the cruise control:
the moment that the active stability control (ASC) kicks in (if so equipped).
use Active Stability Control as an example (ASC).
You can restore the previously set speed by pressing the ACC RES pedal if the cruise control deactivates due to the circumstance mentioned in “To deactivate.”
switch (C) while traveling at a rate of at least 40 km/h (25 mph).
However, utilizing the switch does not function in either of the following scenarios:
allow you to go back to the speed you set.
In these cases, repeat the speed-setting process as follows:
In This Article...
How does a Mitsubishi Outlander 2022 operate with regard to cruise control?
After disabling the cruise control with the brake pedal, select a new desired cruising speed by pushing the “COAST SET switch (B)” and briefly releasing the switch.
How does a Mitsubishi Lancer’s cruise control turn off?
You can disable the set speed driving by doing the following:
Click the “OFF/ON switch (A). (The cruise control will be disabled.) Click the “Turn off switch (D). To stop, apply the brakes.
Can the adaptive cruise control be disabled?
You can: Press the brake pedal to turn off adaptive cruise control. Select CANCEL from the menu. Press the ON/OFF button for the cruise control.
My cruise control light is on, why?
The majority of cruise control lights employ two distinct colors to indicate the system’s status. Normally, when the system is turned on but no speed has been set, the cruise control light will be orange. This indicator will become green once a speed has been chosen.
This indicator will remain orange if the computer has identified a problem and probably not turn off until the issue has been resolved. In order to assist you in determining the root of the problem, the computer will also save a code in its memory. To avoid any issues, the cruise control will also be turned off for a while. A blown fuse, a broken brake switch, or a broken speed sensor are a few typical defects that can keep this light on.
I need to turn on my cruise control.
The cruise control system’s buttons are often found on the steering wheel in cars. To prevent an accident, identify these buttons by consulting your owner’s manual when the automobile is not in use.
Has the 2022 Mitsubishi Outlander been equipped with adaptive cruise control?
In order to provide a cutting-edge safety feature that is greater than the sum of its parts, MI-PILOT Assist merges the Adaptive Cruise Control and Lane Keep Assist capabilities. By monitoring and maintaining the space between vehicles on the road and keeping the car in the middle of the driving lane, MI-PILOT Assist helps drivers. Additionally, the system is made to automatically drive the vehicle forward amid heavy traffic and traffic jams, but only if fewer than 30 seconds have gone since the prior vehicle stopped.
Finally, MI-PILOT Assist can use map data on speed limits and traffic signs to automatically modify vehicle speed for road changes and conditions for 2022 Mitsubishi Outlander models equipped with the Smartphone-link Display Audio navigation system.
How does a Mitsubishi Eclipse’s cruise control work?
After pressing C, take your foot off the gas pedal. Increase the set cruising speed by pushing up B. To lower the specified cruising speed, press C.
What does Mitsubishi Outlander’s Mi-pilot do?
Everything you need to do has just been much simpler to get there. The 2022 Outlander has inbuilt navigation with real traffic updates so you can always choose the proper route. It instantly connects with MI-PILOT AssistTM 2 technology.
How are the running lights turned off on a 2019 Mitsubishi Outlander?
Before turning the key to the “start” position, apply the parking brake. Until you let off the brake, this will turn off the DRLs.