The automatic speed control technology known as cruise control allows you to maintain the same
driving velocity It can be turned on at speeds of up to 40 km/h (25 mph).
CAUTION:
Deactivate the cruise control if you don’t want to maintain a steady speed while driving.
work to ensure safety.
When the road conditions prevent you from staying in one place, do not utilize the cruise control.
the same speed, such as in congested areas or on twisting, icy, or snowy roads,
damp, slick, or going downhill very quickly.
If you engage cruise control while shifting into neutral without engaging the clutch
Initially, the engine will run excessively quickly and could sustain damage.
NOTE:
used to raise the target speed and to end constant-speed driving
to reset the speed to its initial value.
Press each cruise control switch appropriately when using the cruise control.
switch.
If two or more of the cruise controls are turned off automatically, the
Several control switches are simultaneously depressed.
When the cruise control ON OFF switch (A) is depressed, this indicator will turn on.
to activate the cruise control feature.
Press the ON/OFF switch very lightly (A).
If the ignition switch is in the OFF position and the cruise control is activated,
Automatically, cruise control will activate, and the CRUISE control indicator
the following time you start the engine, illuminate.
The cruise control memory data will not function if the battery voltage is insufficient.
shall be deleted. Therefore, it’s possible that the CRUISE control indication won’t turn on while
you turn the engine back on. In this case, you must again press the ON/OFF switch to
press the cruise control button.
2. While traveling at the chosen speed, press the COAST SET switch (B).
The speed that was set as the cruising speed when you released the COAST SET switch
speed.
Switch ACC RES The speed can be increased by holding down the ACC RES switch (C).
will progressively rise. Release the switch once you’ve reached your preferred pace.
You’ve now chosen your cruising speed.
Press the ACC RES switch (C) for less to gradually increase the speed.
than one second and then let it go. Pressing the ACC RES switch (C) causes the
There will be an increase in speed of about 1.6 km/h (1 mph).
Once you’ve reached the required speed, press the COAST button.
SET switch (B) and briefly release the switch to change the desired cruising speed.
speed.
SET COAST switch While traveling at high speeds, hold down the COAST SET switch (B).
You will progressively slow down (coast) to the selected pace.
Release the COAST SET switch once you’ve reached the desired speed. Your preferred speed
has been set.
Press the COAST SET switch (B) to gradually reduce the speed
Release it after less than one second. When you flip the COAST SET switch (B),
There will be a 1.6 km/h speed reduction (1 mph).
Push the COAST button after using the brake pedal to turn off the cruise control.
SET switch (B) and briefly release the switch to change the desired cruising speed.
speed.
In the usual manner, depress the gas pedal. Upon depressing the pedal,
Your speed will increase once more.
To reduce speed, apply the brakes. Returning to the predetermined speed,
ACC RES must be pressed. See To restore the specified speed.
You can disable the cruise control by doing the following:
Any of the following methods can be used to automatically turn off the cruise control:
the moment that the active stability control (ASC) kicks in (if so equipped).
use Active Stability Control as an example (ASC).
You can restore the previously set speed by pressing the ACC RES pedal if the cruise control deactivates due to the circumstance mentioned in “To deactivate.”
switch (C) while traveling at a rate of at least 40 km/h (25 mph).
However, utilizing the switch does not function in either of the following scenarios:
allow you to go back to the speed you set.
In these cases, repeat the speed-setting process as follows:
In This Article...
How do I deactivate the adaptive cruise control?
You can disable Adaptive Cruise Control by doing any of the following:
- Step on the brakes.
- Select CANCEL from the menu.
- Press the ON/OFF button for the cruise control.
What is Adaptive Cruise Control’s activation procedure?
Press the cruise control ON/OFF button on the steering wheel to enable the feature. If your car has a Head-Up Display, or a cluster display, you’ll see a white ADAPTIVE CRUISE CONTROL icon when the system is turned on.
What is a system of adaptive cruise control?
An active safety technology called adaptive cruise control (ACC) automatically regulates a vehicle’s acceleration and braking. It is started by pressing a button on the steering wheel, and it is stopped by the driver braking or by pressing another button.
How can I fix the momentarily faulty adaptive cruise?
Only for Adaptive Cruise, which is momentarily unavailable: The Multi Axis Sensor Learn will be used to resolve the majority of the cars. Perform the Long Range Radar Learn specified in the Radar Sensor Module – Long Range Programming and Setup process in Service Information if the issue is still present.
Can I disable Honda’s adaptive cruise control?
There are three ways to disable the ACC function on a Honda vehicle: On the wheel, press the CANCEL button. On the wheel, press the MAIN button. Step or thump the brake pedal.
How can you tell if your cruise control is adaptive?
Until you let go of the accelerator pedal, adaptive cruise control automatic braking will be momentarily disabled. You’ll either get a notice in the cluster display or the green ADAPTIVE CRUISE CONTROL icon will turn blue.
What distinguishes adaptive cruise control from active cruise control?
Conventional cruise control allows you to select a constant speed. A development of standard cruise control is adaptive cruise control (ACC). With ACC, your car’s speed is automatically adjusted to keep up with the vehicle in front of you. ACC can automatically slow down the vehicle in front of it. Your ACC enables your automobile to return to the speed that you have chosen once the vehicle in front of you pulls out of your lane or accelerates past it. You merely need to turn on the system and choose your chosen following distance after choosing your pace.
How to Use It?
Depending on the type of your car, the precise controls will vary, but typically you must first set a cruising speed and a following distance from the vehicle in front of you.
Controls on the steering wheel are used to operate most systems. The brake and accelerator pedals can also be used at any time to make an intervention.
Adaptive cruise controlcan it falter?
It’s also crucial to realize that some systems can malfunction even when they seem to be functioning properly. You should be aware that if your adaptive cruise control makes use of a laser sensor, bad weather may cause it to lose track of nearby vehicles.