The automatic speed control technology known as cruise control allows you to maintain the same
driving velocity It can be turned on at speeds of up to 40 km/h (25 mph).
CAUTION:
Deactivate the cruise control if you don’t want to maintain a steady speed while driving.
work to ensure safety.
When the road conditions prevent you from staying in one place, do not utilize the cruise control.
the same speed, such as in congested areas or on twisting, icy, or snowy roads,
damp, slick, or going downhill very quickly.
If you engage cruise control while shifting into neutral without engaging the clutch
Initially, the engine will run excessively quickly and could sustain damage.
NOTE:
used to raise the target speed and to end constant-speed driving
to reset the speed to its initial value.
Press each cruise control switch appropriately when using the cruise control.
switch.
If two or more of the cruise controls are turned off automatically, the
Several control switches are simultaneously depressed.
When the cruise control ON OFF switch (A) is depressed, this indicator will turn on.
to activate the cruise control feature.
Press the ON/OFF switch very lightly (A).
If the ignition switch is in the OFF position and the cruise control is activated,
Automatically, cruise control will activate, and the CRUISE control indicator
the following time you start the engine, illuminate.
The cruise control memory data will not function if the battery voltage is insufficient.
shall be deleted. Therefore, it’s possible that the CRUISE control indication won’t turn on while
you turn the engine back on. In this case, you must again press the ON/OFF switch to
press the cruise control button.
2. While traveling at the chosen speed, press the COAST SET switch (B).
The speed that was set as the cruising speed when you released the COAST SET switch
speed.
Switch ACC RES The speed can be increased by holding down the ACC RES switch (C).
will progressively rise. Release the switch once you’ve reached your preferred pace.
You’ve now chosen your cruising speed.
Press the ACC RES switch (C) for less to gradually increase the speed.
than one second and then let it go. Pressing the ACC RES switch (C) causes the
There will be an increase in speed of about 1.6 km/h (1 mph).
Once you’ve reached the required speed, press the COAST button.
SET switch (B) and briefly release the switch to change the desired cruising speed.
speed.
SET COAST switch While traveling at high speeds, hold down the COAST SET switch (B).
You will progressively slow down (coast) to the selected pace.
Release the COAST SET switch once you’ve reached the desired speed. Your preferred speed
has been set.
Press the COAST SET switch (B) to gradually reduce the speed
Release it after less than one second. When you flip the COAST SET switch (B),
There will be a 1.6 km/h speed reduction (1 mph).
Push the COAST button after using the brake pedal to turn off the cruise control.
SET switch (B) and briefly release the switch to change the desired cruising speed.
speed.
In the usual manner, depress the gas pedal. Upon depressing the pedal,
Your speed will increase once more.
To reduce speed, apply the brakes. Returning to the predetermined speed,
ACC RES must be pressed. See To restore the specified speed.
You can disable the cruise control by doing the following:
Any of the following methods can be used to automatically turn off the cruise control:
the moment that the active stability control (ASC) kicks in (if so equipped).
use Active Stability Control as an example (ASC).
You can restore the previously set speed by pressing the ACC RES pedal if the cruise control deactivates due to the circumstance mentioned in “To deactivate.”
switch (C) while traveling at a rate of at least 40 km/h (25 mph).
However, utilizing the switch does not function in either of the following scenarios:
allow you to go back to the speed you set.
In these cases, repeat the speed-setting process as follows:
In This Article...
Has the 2022 Mitsubishi Outlander been equipped with adaptive cruise control?
In order to provide a cutting-edge safety feature that is greater than the sum of its parts, MI-PILOT Assist merges the Adaptive Cruise Control and Lane Keep Assist capabilities. By monitoring and maintaining the space between vehicles on the road and keeping the car in the middle of the driving lane, MI-PILOT Assist helps drivers. Additionally, the system is made to automatically drive the vehicle forward amid heavy traffic and traffic jams, but only if fewer than 30 seconds have gone since the prior vehicle stopped.
Finally, MI-PILOT Assist can use map data on speed limits and traffic signs to automatically modify vehicle speed for road changes and conditions for 2022 Mitsubishi Outlander models equipped with the Smartphone-link Display Audio navigation system.
How does a Mitsubishi Outlander 2021 set the cruise control?
Push the cruise control off by depressing the brake pedal, then “Set the COAST SET switch (B) to the new desired cruising speed by briefly releasing the switch. You can disable the cruise control by doing the following: Click the “Switch (A) for ON/OFF (cruise control function will be deactivated).
What is a system of adaptive cruise control?
An active safety technology called adaptive cruise control (ACC) automatically regulates a vehicle’s acceleration and braking. It is started by pressing a button on the steering wheel, and it is stopped by the driver braking or by pressing another button.
How does a Mitsubishi Eclipse’s cruise control work?
After pressing C, take your foot off the gas pedal. Increase the set cruising speed by pushing up B. To lower the specified cruising speed, press C.
Has the Mitsubishi Outlander had remote starting since 2022?
YES! A remote starter can be installed by the user. Do not pay extravagant dealer fees to have the dealer perform services that you can perform yourself. YOU were considered during the design of the Start-Xkit. You, the typical car owner who is capable of performing a few simple repairs.
The T-harness that is included makes installation a lot easier. Wires don’t need to be cut or joined. Complete Plug N Play.
By hitting lock three times on the factory remote, which is included in the base package, you can remote start your vehicle without carrying a separate remote. The distance at which you can lock your car is the same as the range at which you can remote start it.
You can add a long-range RF kit as an option for even longer range. If you really want to go all out, you can select a cell phone module that enables you to begin from almost anywhere that has phone service. The RF kits provide you a second remote that can operate at a considerably greater distance.
Kit contains:
- Module for Remote Starting
- Installation guidelines
Are there adaptive cruise controls on the Mitsubishi ASX?
We drove the second-to-last ASX GSR, which costs $32,490 to get to. The larger 2.4-liter engine, paddle shifters, black exterior accents like the wheels and badging, additional safety equipment like lane departure warning and blind-spot monitoring with rear cross-traffic alert, auto lights and wipers, auto high beam, LED front fog lights, roof rails, rear parking sensors, faux leather/suede upholstery, and keyless entry and start are all features of the GSR. It also has a pretty high level of standard equipment.
The GSR’s specifications are well-done, but to equal certain competitors, it might have features like adaptive cruise control, an electric driver’s seat, heated mirrors, and heated seats.
The Kia Seltos Sport+, which costs $1,500 more than the ASX GSR but comes standard with features like heated mirrors, adaptive cruise control, rear AEB, an electric parking brake, and auto window defogging, competes with it in the market.
What do you receive when you upgrade to the ASX Exceed? Full leather interior with heated front seats, integrated satellite navigation with a speed limit display, a nine-speaker Rockford Fosgate audio system, an electric driver’s seat, and distinctive 18-inch alloy wheels Though getting pricey, it’s still not bad at $3,500. We would limit it to GSR.
How does xpander’s cruise control work?
Press the button at the end of the control stalk behind the lower right corner of the steering wheel to activate Cruise Control before using it. When the system is prepared, the green cruise control icon will appear in the instrument display. Once you’ve reached the desired speed, depress the stalk to lock it in place.
I want to activate adaptive cruise control.
Press the cruise control ON/OFF button on the steering wheel to enable the feature. If your car has a Head-Up Display, or a cluster display, you’ll see a white ADAPTIVE CRUISE CONTROL icon when the system is turned on.
How can I tell if the cruise control on my car is on?
The cruise control system’s buttons are often found on the steering wheel in cars. To prevent an accident, identify these buttons by consulting your owner’s manual when the automobile is not in use.