The automatic speed control technology known as cruise control allows you to maintain the same
driving velocity It can be turned on at speeds of up to 40 km/h (25 mph).
CAUTION:
Deactivate the cruise control if you don’t want to maintain a steady speed while driving.
work to ensure safety.
When the road conditions prevent you from staying in one place, do not utilize the cruise control.
the same speed, such as in congested areas or on twisting, icy, or snowy roads,
damp, slick, or going downhill very quickly.
If you engage cruise control while shifting into neutral without engaging the clutch
Initially, the engine will run excessively quickly and could sustain damage.
NOTE:
used to raise the target speed and to end constant-speed driving
to reset the speed to its initial value.
Press each cruise control switch appropriately when using the cruise control.
switch.
If two or more of the cruise controls are turned off automatically, the
Several control switches are simultaneously depressed.
When the cruise control ON OFF switch (A) is depressed, this indicator will turn on.
to activate the cruise control feature.
Press the ON/OFF switch very lightly (A).
If the ignition switch is in the OFF position and the cruise control is activated,
Automatically, cruise control will activate, and the CRUISE control indicator
the following time you start the engine, illuminate.
The cruise control memory data will not function if the battery voltage is insufficient.
shall be deleted. Therefore, it’s possible that the CRUISE control indication won’t turn on while
you turn the engine back on. In this case, you must again press the ON/OFF switch to
press the cruise control button.
2. While traveling at the chosen speed, press the COAST SET switch (B).
The speed that was set as the cruising speed when you released the COAST SET switch
speed.
Switch ACC RES The speed can be increased by holding down the ACC RES switch (C).
will progressively rise. Release the switch once you’ve reached your preferred pace.
You’ve now chosen your cruising speed.
Press the ACC RES switch (C) for less to gradually increase the speed.
than one second and then let it go. Pressing the ACC RES switch (C) causes the
There will be an increase in speed of about 1.6 km/h (1 mph).
Once you’ve reached the required speed, press the COAST button.
SET switch (B) and briefly release the switch to change the desired cruising speed.
speed.
SET COAST switch While traveling at high speeds, hold down the COAST SET switch (B).
You will progressively slow down (coast) to the selected pace.
Release the COAST SET switch once you’ve reached the desired speed. Your preferred speed
has been set.
Press the COAST SET switch (B) to gradually reduce the speed
Release it after less than one second. When you flip the COAST SET switch (B),
There will be a 1.6 km/h speed reduction (1 mph).
Push the COAST button after using the brake pedal to turn off the cruise control.
SET switch (B) and briefly release the switch to change the desired cruising speed.
speed.
In the usual manner, depress the gas pedal. Upon depressing the pedal,
Your speed will increase once more.
To reduce speed, apply the brakes. Returning to the predetermined speed,
ACC RES must be pressed. See To restore the specified speed.
You can disable the cruise control by doing the following:
Any of the following methods can be used to automatically turn off the cruise control:
the moment that the active stability control (ASC) kicks in (if so equipped).
use Active Stability Control as an example (ASC).
You can restore the previously set speed by pressing the ACC RES pedal if the cruise control deactivates due to the circumstance mentioned in “To deactivate.”
switch (C) while traveling at a rate of at least 40 km/h (25 mph).
However, utilizing the switch does not function in either of the following scenarios:
allow you to go back to the speed you set.
In these cases, repeat the speed-setting process as follows:
In This Article...
How does a Mitsubishi Outlander 2022 operate with regard to cruise control?
After disabling the cruise control with the brake pedal, select a new desired cruising speed by pushing the “COAST SET switch (B)” and briefly releasing the switch.
Has the 2022 Mitsubishi Outlander been equipped with adaptive cruise control?
In order to provide a cutting-edge safety feature that is greater than the sum of its parts, MI-PILOT Assist merges the Adaptive Cruise Control and Lane Keep Assist capabilities. By monitoring and maintaining the space between vehicles on the road and keeping the car in the middle of the driving lane, MI-PILOT Assist helps drivers. Additionally, the system is made to automatically drive the vehicle forward amid heavy traffic and traffic jams, but only if fewer than 30 seconds have gone since the prior vehicle stopped.
Finally, MI-PILOT Assist can use map data on speed limits and traffic signs to automatically modify vehicle speed for road changes and conditions for 2022 Mitsubishi Outlander models equipped with the Smartphone-link Display Audio navigation system.
What does Mitsubishi Outlander’s Mi-pilot do?
Everything you need to do has just been much simpler to get there. The 2022 Outlander has inbuilt navigation with real traffic updates so you can always choose the proper route. It instantly connects with MI-PILOT AssistTM 2 technology.
Is adaptive cruise control a feature of the Mitsubishi Outlander PHEV?
The Mitsubishi Outlander PHEV (Plug in Hybrid Electric Vehicle) is a smart Adaptive Cruise Control (ACC) System-equipped SUV and the first 4×4 plug-in hybrid SUV in the world. The Outlander’s ACC uses radar technology to detect any vehicles in front and alter the speed of the vehicle as necessary, locking onto the lead vehicle and maintaining a constant distance from it. It is ideal for travelling at high speeds since it is cruise control on steroids.
How can I tell if the cruise control on my car is on?
The cruise control system’s buttons are often found on the steering wheel in cars. To prevent an accident, identify these buttons by consulting your owner’s manual when the automobile is not in use.
Is it acceptable to always utilize the cruise control?
When using cruise control while driving in the rain, snow, hail, sleet, or ice, the system may not be able to maintain a consistent pace due to the slick roadways. When using cruise control at an excessively high speed on rainy roads, the car may hydroplane if it hits any standing water. Operation of the cruise control may cause a skid or spin on conditions with very little traction, such as ice and snow. Avoid using cruise control on slick roads and drive carefully.
How should a car with cruise control be driven?
Press the button at the end of the control stalk behind the lower right corner of the steering wheel to activate Cruise Control before using it. When the system is prepared, the green cruise control icon will appear in the instrument display. Once you’ve reached the desired speed, depress the stalk to lock it in place.
How does automatic cruise control operate?
It would be quite exhausting to continually depressing the accelerator pedal while traveling for a considerable distance on an open road. The use of cruise control can lessen the amount of weariness that long-distance drivers could experience. The system mimics how human drivers operate their vehicles. However, it employs an actuator to operate the throttle instead of the accelerator pedal, allowing your automobile to maintain the same speed when travelling.
The accelerator is kept at a specific position to maintain the pre-set speed by the cruise control system, which is utilized in older cars. The speed is electrically controlled by a software instead of a cable in contemporary autos. Instead, the feature is controlled wirelessly by a computer that is connected to a number of sensors and throttle controls. With this more recent technology, the speed can be automatically adjusted while keeping a safe distance from the car in front. Since drivers are not constantly pressing and releasing the accelerator pedal, it significantly lowers driver fatigue. The device will be especially helpful for drivers on highways or other busy roadways during rush hour.
Use of cruise control and fuel usage
Yes, generally speaking. Due to its capacity to maintain a constant pace, cruise control can help you drive more fuel-efficiently and can help you save 714% on gas on average. In contrast, the constant acceleration and deceleration caused by the driver’s foot on the pedals might use up more gas. According to a Natural Resources Canada research, the car used 20% more gas when its speed varied between 47 and 53 mph (75 and 85 kph) every 18 seconds as opposed to setting the cruise control to 50 mph (80 kph). Remember that using cruise control on flat, empty roads with little to no traffic, or even on uphill or downhill drives, will only result in fuel savings. However, it is advised to turn off the cruise control function if you are driving on continuously changing hills or severe inclines. High-quality cruise control systems are said to be capable of handling unexpected hills, but keep in mind that results vary from car to vehicle. The capacity of cruise control to reduce driver tiredness while engaging in long-distance driving while preserving fuel efficiency by obviating the need for excessive acceleration and deceleration is ultimately its greatest benefit.