- Activate the OFF position on the ignition switch.
- To cycle through the menus, lightly push the INFO or TRIP/RESET button on the left side of the instrument cluster “The Service Reminder screen
- When the INFO or TRIP/RESET button is pressed and held for around 2 seconds, the “The tool icon shows up and flashes.
- Press the INFO or TRIP/RESET button very lightly while the icon is blinking. The text ” _” will change to “Clear” on the screen.
- It will then display the time till the following service, indicating that the reset was successful.
In This Article...
Exactly how can you turn a 2015 Mitsubishi Outlander’s maintenance light back on?
Okay, so here is a guide explaining how to turn off the periodic inspection or service light on an older Mitsubishi Outlander (2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015). So what you must do is:
- Deactivate the ignition.
- until thespanner appears, repeatedly press the INFO button.
You navigate through the INFO button here while the ignition is off until you find the spanner icon.
- Hold the INFO button while pressing.
- Press the INFO button one more after releasing it.
When you hit the INFO button once more, CLEAR will appear on the dash.
After an oil change, how do I turn off the maintenance light?
Push and hold the trip meter reset button on the dashboard, then turn your key to position two. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off. Start the vehicle after releasing the odometer button.
Causes of a flickering oil light
If your oil light continues to illuminate even after changing the oil in your engine, you should examine the sensor to rule out a faulty sensor as the root of the problem. The oil pump might become clogged with dirt and other debris, leading the sensor to mistakenly report oil problems. Although changing the sensor is pretty straightforward, you should take your car to a qualified mechanic if you don’t feel confident doing it yourself. Low oil pressure is the following typical reason. Your oil light will turn on if the oil pressure drops below 5 pounds per square inch. You should check the oil level even though this shouldn’t happen after an oil change because you never know.
Even after an oil change, the final common cause of a lit oil light is perhaps the most troublesome. Numerous engine problems might result from the oil pump not circulating enough oil to maintain the engine’s parts lubricated and operating as intended. Parts do wear down over time, even though getting oil changes at regular intervals should prevent this issue from happening.