- Turn off your car.
- The wrench icon will not appear on the Dashboard until you repeatedly press your info button. On the dashboard’s left side, close to the left air conditioning vent, is where you’ll find the info button. A double square icon with three horizontal bars or the word info can be used to symbolize an info icon.
- Hold down the info button while waiting for the dashboard’s wrench icon to start blinking.
- One more time, press the info button, and then quickly let go.
- Start the engine to see if the reminder has been removed; if the “Routine Maintenance Required” message has vanished, you are finished.
Like any other vehicle, a Mitsubishi Outlander needs routine oil changes to keep the engine from prematurely wearing out.
Every six months or 7,500 miles, the engine oil and oil filter should be changed.
You must reset the Oil Service Interval counter by doing the following after changing the oil and oil filter.
A 2015 Mitsubishi Outlander’s oil light needs to be reset, but how?
- Activate the OFF position on the ignition switch.
- To cycle through the menus, lightly push the INFO or TRIP/RESET button on the left side of the instrument cluster “The Service Reminder screen
- When the INFO or TRIP/RESET button is pressed and held for around 2 seconds, the “The tool icon shows up and flashes.
- Press the INFO or TRIP/RESET button very lightly while the icon is blinking. The text ” _” will change to “Clear” on the screen.
- It will then display the time till the following service, indicating that the reset was successful.
How can you turn a Mitsubishi’s maintenance light back on?
Service reset ROUTINE MAINTENANCE REQUIRED notification on Mitsubishi Lancer X (also evolution. With a simple button press, you can delete this service interval reminder yourself.
- Ensure that all of the doors are closed when seated in the driver’s seat.
- Put the ignition key in the OFF position.
- To activate the display inside the instrument cluster, press the INFO button. Look for the service-related notice with a spanner icon.
- Hold down the INFO button while waiting for the spanner icon to flash.
- Hit the INFO key. You must observe “VERY CLEAR notice on the screen.
- To confirm the reset of the service reminder, press the INFO button once more. The distance and time to the next service should now be updated.
- To ensure that the ignition is on, “The notification “ROUTINE MAINTENANCE REQUIRED” has vanished.