Your car was built to last and go for a long time between repairs. But what happens when it’s time to swap out worn-out essential parts? Either hire a reputable mechanic or become self-taught in issue solving.
The good news is that you can often perform simple repairs at home. similar to changing the shocks and struts If you have no experience working on vehicles, you shouldn’t try the job. However, with some instruction and experience, you’ll be prepared to take on the challenge. Typically, getting back on the road shouldn’t take more than a few hours.
You’ve come to the perfect place if you want to replace the shocks and struts on your car. In this article, we’ll compare the two and explain how to replace them to help you save money. Read on to discover more.
In This Article...
How much time is required to replace the rear struts?
Is the stop of your vehicle taking longer than usual? Is it strangely bumpier? The symptoms definitely indicate that your struts have failed, thus I believe it is time to replace them. Fortunately, you can either do it yourself or hire a professional to replace them.
Most professional mechanics agree that changing struts typically takes one to two hours. As long as you have prior mechanical experience and perform the procedure correctly, the expected time is the same even if you choose to replace them on your own.
The ability to manage and control the vehicle may be compromised if struts are not replaced in a timely manner.
Are there particular tools required to install struts?
Driving on old struts actually results in higher costs since the unregulated bouncing quickly wears out expensive suspension parts like ball joints, control arm bushings, stabilizer bar end links, and tie rod ends. It also swiftly damages your tires. In addition, worn struts increase your stopping distance from 60 mph by roughly 10 feet and cause steering instability, which is dangerous, especially on curves at higher speeds.
It used to be dangerous for a do-it-yourselfer to replace struts. While hoping the spring wouldn’t let go and rip out an eye or a limb, you had to compress it and remove the strut. Furthermore, if the internal hex pulled out, removing the rusty nut at the top of the strut might become a nightmare. However, you can now purchase a full strut assembly that does away with the need to disassemble the strut, spring, and mount. With these assemblies, you may quickly and easily replace both of your front struts. Even though you’ll need to have an alignment afterwards (costs roughly $100), doing the work yourself will still result in a $300 save. You’ll also need a thin piece of plywood, pin punches, large screwdrivers, wrenches, and rust penetrant. You might need to purchase a breaker bar and a couple large sockets. These are the procedures.
Do you require an alignment after strut replacement?
Here are the responses to the query in brief
After changing shocks and struts, do you require an alignment? Yes, if the automaker advises an alignment following a replacement. Yes, if you made any modifications to your suspension that did not adhere to the manufacturer’s instructions.
How much do rear strut repairs cost?
Depending on the brand and model, struts typically cost $150 to $450. Usually, it is necessary to replace both struts at once. A pair of struts will cost you between $300 and $900 to replace. It can take several hours to replace a strut.
How can I tell if my struts need replacement?
Although several factors (hello, potholes) affect the lifespan of your shocks or struts, Reina claims that if you experience any of these seven signs, it’s time for replacements.
- erratic behavior at motorway speeds. On the highway, your car never feels entirely solid and is always going up and down. Despite how little the movement may be, you may feel it.
- Vehicle “In turns, it leans to one side. Your car leans or slides when you exit a ramp or make a sharp turn “It seems unstable and tips to the outside of the turn.
- During forceful braking, the front end drops more than is normal. You might not realize this until you have to use the brakes quickly.
- When accelerating, stoop from the rear. You’ll observe that the front of your car is rising while the back “during rapid acceleration, squats.
- severe bouncing of the tires. You can feel a tire (or tires) reacting or moving after hitting a bump “bouncing briefly. There can also be a clunking sound.
- uncommon tire wear The tread wears unevenly instead of wavy because the tire isn’t being held tightly to the road.
- leakage of fluid from shocks or struts’ outside surfaces. This indicates that the internal fluids necessary for proper operation are escaping because the seals have cracked.
Do I need to adjust my struts with a spring compressor?
Shock and strut replacement might be risky if you don’t know what you’re doing. Before attempting to disassemble your car, please read these guidelines to ensure the project’s efficiency and safety.
Spring Compressor
Many automobiles have integrated springs inside the shocks and struts, which, if removed improperly, could cause you harm or damage your car. In these situations, you’ll need a spring compressor to safely disassemble everything.
Your neighborhood auto parts store may rent out spring compressors, but it’s crucial to know how to operate them. You must exercise caution because this step is crucial to changing shocks and struts. If you’re unsure about removing the springs, you might want to think about taking your car to a repair.
Raise the Vehicle
When all of your components and tools are prepared, you should use a car jack to raise your vehicle one side at a time. To maintain stability once it is upright, put a jackstand behind the front wheel. Otherwise, a lift is available.
Prior to trying to loosen anything or climbing beneath the vehicle, just make sure it is secured.
Remove Old Shocks and Struts
You must first remove the wheels. Next, using your spring compressor, search for the three bolts holding the shock or strut in place at the bottom. These bolts should be loosened, but not yet totally taken out.
Another bolt inside the engine compartment secures the top of the shock or strut. To loosen it, use an impact wrench with a socket extension. Your shock or strut should come free once you’ve managed to get this loose and finished removing the other bolts.
Installing New Shocks and Struts
You can just swap in the new shocks and struts after removing the old ones. Make certain that all of the bolts are tightly tightened. To perform this, you most likely need a torque wrench.