It’s critical to be aware of the signs of a damaged blower motor if you’re trying to diagnose the issue.
Here are 4 typical signs of a failing blower motor:
- Vent airflow is minimal or absent. Air vent airflow that is restricted is a common indicator of a faulty blower motor. There won’t be any airflow if the blower motor is totally damaged.
- The blower is making strange noises. Depending on the problem, blower motors can generate a variety of noises. When a blower is malfunctioning, it may generate noises like vibrations, grinding, and high-pitched noises.
- The circuit breaker frequently trips. A seized-up blower motor will undoubtedly trigger a circuit breaker. (Check the circuit breaker first; a faulty capacitor will also trip it.)
- burning or hot odor coming from the air vents. Sometimes a malfunctioning blower motor will overheat, emitting a “hot scent” via your air vents. Your blower motor can potentially start to burn in the worst-case conditions. Yikes!
In This Article...
How much does a blower motor replacement cost?
The average cost to replace a blower motor is $450, with costs often ranging from $250 to $800. You might spend as little as $150 on labor alone if you have a warranty. You may have to pay up to $2,000 for high-end versions, such as those with powerful motors or accessibility problems.
What is a blower motor?
The blower motor is the component of the furnace or air handler that propels conditioned air through the ductwork and into the house. The same blower motor is often used by the furnace and air conditioner to move warm or cooled air.
How long does it take to replace a blower motor?
It typically takes 2 to 3 hours to replace a blower motor. Typically, the blower motor is hidden behind a control panel and other furnace components. An HVAC technician removes other components as needed, replaces the motor, cleans the fan, tests the new motor, and reassembles the furnace.
How to test if a blower motor is bad?
Electrical expertise and a multimeter are required for testing a blower motor’s capacitor and electrical windings. In order to test the motor without calling an HVAC specialist, use these troubleshooting steps:
- Verify that the home’s electrical panel’s circuit breaker has not tripped.
- Verify that the furnace’s outside on/off switch is turned “on.”
- Inspect the air filter for dirt accumulation and change it as necessary.
- Turn off the electricity and remove the furnace cover to reveal the parts if the blower operates but the system does not.
- Get rid of any dirt and debris that may be on or near the blower motor.
- Restart the electricity.
- If the blower motor problem continues, contact an HVAC professional.
Is it challenging to swap out a blower motor?
Find a good mechanic if you don’t want to shiver or perspire. The blower motor replacement is a popular and simple repair, therefore most companies will do the work on the same day.
What could stop a blower motor from operating?
A blower motor resistor typically fails as a result of corrosion or overheating. Sometimes the mechanical resistance to the motor spinning results in an excessive electric current, which can cause the blower motor resistor to overheat and suffer early damage.
Will my car still start without a blower motor?
The blower motor in your car is required for more than just your air conditioner to work. Your engine faces the risk of overheating if the blower motor isn’t operating properly.
How can you detect whether the blower motor or resistor is malfunctioning?
A blower motor that is stuck on one setting is a typical sign of a bad blower motor resistor. The element immediately in charge of regulating the blower motor fan speed is the resistor. The blower motor may become stuck at one fan speed if the resistor shorts out or fails. The resistor will need to be changed in order to fully functionally repair the heating and cooling systems, even though they may still run at one speed.
A blower motor is situated where?
Depending on how the climate system is configured and the fan speed chosen, the blower motor is the fan that propels warm or cooled air via the dashboard vents.
A signal to speed up or slow down the blower motor is sent when the fan speed is changed by a resistor. Depending on the chosen fan speed, the blower motor resistor modifies the amount of current going to the blower motor. Based on the amount of outside air entering the climate system, only a little amount of air will pass through the inside vents when a blower motor fails. Before blaming the blower motor if the fan isn’t working, make sure the motor’s fuses are still in good condition. For the blower motor, many cars have two fuses, one in the interior fuse block and the other under the hood. Typically, the blower motor is located on the passenger side under the dashboard. Blower motors that squeak or rattle loudly may be worn out and close to giving up, but occasionally these noises are made by leaves or other debris that may be cleaned out when the motor is taken out of the car.
The blower motor is creating noise; why?
Screeching and squealing noises are frequently the result of a blower motor problem. The motor’s bearings have a history of drying out. Adding grease frequently solves problems with motor bearings. If you decide to apply the lubrication yourself, make sure you use an appropriate lubricant (either a mineral or synthetic oil).
Additionally, a broken belt may make squealing and screeching noises. To aid you with belt replacement and keep your furnace from breaking down, call a qualified furnace specialist.
Why is the blower motor in my car so loud?
It’s not always a sign that something major is amiss when you hear a faint, rattling, or grinding noise while your heater or air conditioner is blowing lightly, or when it blows so hard that it seems like your dashboard is vibrating. The good news is that while the car AC fan noise is annoying and noisy, it may be reasonably easy to fix.
What’s causing that loud AC noise?
Blower motor problems are often indicated by loud noises you hear when your car’s heater or air conditioner are on. The good news is that something as simple as garbage or trash that got caught in it may be the cause of a blower motor issue like this.