How To Remove Mitsubishi Steering Wheel

  • Remove the airbag and then unplug the battery. Observe this direction here.
  • To unfasten the nut holding the steering wheel to the steering column, use a 17mm socket and ratchet. To avoid damaging the steering locking mechanism with too much force, it is best to have someone hold the steering wheel while you break the nut loose.
  • Mark the locations where the steering wheel is joined to the spline at 12 o’clock and 3 o’clock before completely removing the nut. This is a crucial step, and the presence of these lines guarantees the steering wheel’s correct alignment with the steering column.
  • If the steering wheel won’t come off, hold the opposing sides and pull while rocking the wheel back and forth.
  • Be careful not to disturb the steering angle sensor as you carefully remove the electrical connector from the back of the steering wheel. It must remain in the same place otherwise it will generate error codes and lead to a number of issues.
  • Transfer the marks to the steering wheel’s spline if you’re replacing the current one. Once more being cautious not to disturb the steering angle sensor, attach the electrical connector. Press the steering wheel back into the splined shaft after aligning the marking on the shaft with the steering wheel.
  • Once it is properly attached, double-check that the steering wheel is lined up appropriately on the shaft based on its marks. Replace the nut if everything seems to be in order. Have someone keep the steering wheel still and torque to specification.
  • Reverse the remaining steps, re-connect the battery, and then start the vehicle. Check to see whether any dash-mounted malfunction indicator lights are being activated by any diagnostic issue codes. You’ve finished!

How is the steering wheel removed?

Steps

  • Before You Begin Security first!
  • wheel straightening If you decide to proceed with the task, park the car with its wheels pointed directly ahead.
  • Remove the battery. Now take the battery’s negative terminal off.
  • Leave Nut Attached.
  • Steering wheel puller with thread on.

The difficulty of changing a steering wheel

You should be able to clearly see the central lug nut holding the steering wheel in place after unplugging the wires. Most of the time, you can remove it using everyday equipment.

But occasionally, because the center lug nut pattern could differ, you’ll require a specific set. But getting rid of it shouldn’t be that difficult.

What is the price of replacing a steering wheel?

The price of a new steering wheel can range from $70 to $75. Depending on variables like the brand and model of your car, labor charges can change. You can save some money by replacing the steering wheel yourself if you have appropriate DIY auto repair skills.