The directions given here apply to all Mitsubishi vehicles manufactured between 1996 and the present, such as the Outlander, Galant, Mirage, Lancer, Eclipse, etc. You will require an Airbag OBD2 Scanner for this process.
- Connect the Mitsubishi airbag scanner to the driver-side OBD2 port under the dashboard.
- Start the engine, then let the scanner come to life.
- Select the year and model of your Mitsubishi. For instance, Lancer in 2017.
- From the main menu, select SRS / Airbag Control unit.
- Choosing Read Fault Codes. Make a note of all the codes and confirm they aren’t present.
- Select Clear Fault Codes from the main menu after returning there.
You should only clear Mitsubishi airbag fault codes if they are in Stored or Past status.
Never remove Current, Active, or Present codes before addressing the issue. Usually, no matter how hard you attempt to remove the current Mitsubishi airbag codes, the car will restart with them still present.
In This Article...
Why does the SRS light continue to be on?
Ever wondered what that bothersome light at your instrument cluster signified while it was on?
The Supplemental Restraint System (SRS) warning light is also referred to as the airbag system light. This airbag deployment system, which is computer-controlled, may have one or more side, passenger, and driver airbags. The seat belts are also tightened by the computer to prevent the passengers from bodily injury during a collision’s impact.
Because the vehicle occupants do not need to do anything in order for the SRS system to activate when the enabling criteriaspeed and decelerationare satisfied, the system is also known as a passive restraint system. Seat belts, on the other hand, are an active restraint system. Each seat belt must be actively latched by a driver or passenger for it to function. Even with automatic seat belts, the lap belt needs to be manually fastened.
The Bulb Check: SRS Warning Light
The SRS light should be illuminated for 1 to 5 seconds when the car is first started when the system does a self-test. The system is ready if the light goes out. If the indicator continues to illuminate, the SRS system is malfunctioning. The system is currently turned off. The seat belts won’t tighten, the airbags won’t deploy, and no other features will engage in the event of a collision.
What to Do: SRS Warning Light
After doing the self-test, if the SRS light is still on, you should take your car to a reputable repair facility to have it thoroughly examined and inspected. It is a good idea to look for any manufacturer recalls that may apply to your car because they may cover some airbag system repairs or provide you with an extended warranty. Don’t hesitateif there is an accident or collision, you could not be adequately covered.
Not many people are aware that the SRS system includes a “black box that resembles a passenger jet. It not only keeps track of accident-related information like speed, “The length of time the SRS system was deactivated due to a fault condition is just as important as the G forces, how many seat belts were fastened, etc. In particular, if they conclude that a functioning airbag system would have averted the injuries, the insurance company may not be prepared to pay for any injuries if they determine that the SRS system was in a fault mode for a period of time they deem to be lengthy.
Take the SRS light carefully if it is on or blinking. You and your passengers are at risk because the vehicle’s safety systems are compromised due to a fault situation.
Background Information: SRS Warning Light
The motion or “G” sensors, vehicle speed sensors, steering system sensors, vehicle angle sensors, and seat belt sensors all send input data to the SRS computer system, which continuously analyses. The SRS system will decide which airbags, if any, to deploy and which seat belts to tighten when the enabling criteria have been satisfied, such as a vehicle speed above 25 mph and a highly abnormal rate of deceleration. The airbags’ main function is to soften or prevent passengers from slamming their bodies onto the dashboard or steering wheel, especially their heads. The seat belts tighten to prevent the car’s occupants from moving forward.
The driver and passenger are lowered into a prone position by newer, improved SRS systems that recline the front seatbacks, helping to better absorb the whiplash/recoil phase of an impact and hopefully preventing any neck or spinal injuries. To prevent occupants of modern automobiles from colliding with the side pillars, particularly with their heads, many of them are equipped with side airbags. Some modern cars also have SRS curtains, which lower to shelter the passengers from flying glass from windows and windshields.
What exactly does SRS on a Mitsubishi mean?
“Safety Resistance System” air bags are referred to as SRS. scan it; it can be something as basic as a light bulb. It was useful to 7 individuals. 7 years ago, FordNut responded. System of additional restraint. Seatbelt pre-tensioners that tighten up automatically when airbags deploy and airbags themselves.
What does it cost to repair the airbag light?
Reset Airbag Light, at No. 1 This procedure typically takes several hours and costs a few hundred dollars, though depending on the car, it might cost as much as $600.
Can a blown fuse turn on the airbag light?
The car could have blown a fuse, for example. There are other fuses that could be to blame, but fuse #13 is most likely the one. You probably need to change fuse #13 and perhaps other fuses if your airbag light is on and your rear windshield wiper is not working. The airbag light can undoubtedly turn on as a result of blown fuses.
The airbag light may also abruptly turn on in a number of other situations. A mechanic or auto parts store should be able to decipher the code that the airbag system emits when it is acting up, which will give them a hint as to what specific issue the airbag is experiencing. There are numerous potential issues with the airbag because it is a complicated system of sensors, wiring, and programming that must suddenly activate during an accident after lying dormant for years. Check the fuse box to see whether you have a blown fuse first, but if not, you’ll likely need to take it to the dealer or a qualified mechanic for service.
Driving while the airbag light is on is it safe?
When the airbag light comes on, the vehicle’s airbag system is malfunctioning. Due to this flaw, the airbag is unlikely to deploy after an accident. As a result, it is not advised that you use the car until the system has been fixed.
Never disregard the important caution. There’s no need to gamble with the car, even though it doesn’t make it unsafe to drive.
The light does, however, show that the SRS parts are not functioning properly. This may potentially indicate that the airbags won’t activate in the event of a collision. You shouldn’t wait until you are involved in an accident to determine whether the airbags will keep you safe.
Can an airbag light be caused by a low battery?
This light indicates that your airbags are deactivated while it is on. It implies that if you have an accident, they won’t deploy properly. The backup battery that powers the airbags may have also run out if your car’s main battery recently discharged.
How can the airbag light be turned off?
Resetting an Airbag Light
- Turn the switch to the “on” position after inserting the key into the ignition.
- Pay attention for the airbag light to activate. It will remain lit for seven seconds before turning off on its own. Turn the switch off right away and wait three seconds after it shuts off.
- Steps 1 and 2 should be repeated twice more.
SRS malfunction: what is it?
Supplemental Restraint System is referred to as SRS. If your Mercedes Benz’s warning light continues to illuminate, there may be an issue with the airbags or other SRS system components.
What do SRS lights do?
When the SRS light comes on while you are driving, there is a problem with the airbag system of the vehicle. Additionally, it implies that if you are in an accident, the airbags might not deploy. Take your automobile to have the SRS sensor checked as soon as possible if the light illuminates.