- A cold engine that hasn’t been driven is a must.
- Start the engine, then shift through the P, R, N, and D gears while pausing for five seconds in each one.
- Put the automobile on a level spot. Put the parking brakes on and the gear selector in Park. Keep the car running.
- Open the hood by pulling the hood release located under the dashboard.
- Find the dipstick for the transmission. It is located between the battery and the motor on the driver’s side of the majority of Mitsubishi automobiles.
- Take remove the dipstick and wipe it down with a clean towel. Reinstall it entirely in the transmission tube.
- Removing the dipstick once again The level should fall between the C-marked MIN and MAX mark lines. Since the letter C stands for “cold,” transmission fluid is still cold. Drive the car in a stop-and-go pattern for fifteen minutes, being sure to change through all the gears, if the level is below the MIN mark. If the car has a CVT gearbox, use the shifter lever to manually change into first, second, third, and fourth gears while driving and stopping frequently.
- Repeat procedures 2 through 5 after stopping the car. If you follow the aforementioned technique once the transmission fluid has warmed up, the temperature should now be between 70 and 80 C. The transmission fluid level should be between the H-shaped MIN and MAX indicators when you check it. H is short for hot.
- Add the necessary amount of Mitsubishi transmission fluid specified in your owner’s handbook if the level is low.
Burnt-smelling transmission fluid may be a sign of a damaged torque converter or internal transmission wear. Although there is no assurance, changing the transmission fluid and filter may occasionally solve the issue.
In This Article...
How can I fill up my Mitsubishi Galant’s transmission?
Check the level of the transmission fluid in a Mitsubishi Galant (20042012) ES 2.4L 4 Cyl.
- Access location for transmission fluid: remove dipstick.
- Check Level: To check the level, insert the dipstick and remove it.
- Add Fluid – Select the proper type of fluid and add it.
- Replace the dipstick by reinstalling the dipstick and cap.
A 2008 Mitsubishi Galant’s gearbox fluid should be checked, but how?
While removing the dipstick, take care not to drop or spill any liquid. Like when checking the engine oil, wipe out the dipstick with a clean rag. To check the fluid level, reinstall the dipstick and then remove it once more. Make sure to use the recommended transmission fluid if you need to top it off.
How exactly should transmission fluid be checked?
The dipstick should be removed, cleaned, replaced cautiously, and then pulled back out again. Verify the fluid level by comparing the dipstick’s “full” and “low” or “fill” signs to how high the fluid rises on the stick. You can learn a lot about the condition of your car’s transmission from the color of the transmission fluid.
Describe CVT fluid.
Specifically designed for today’s highly advanced variable gearboxes, CVT Fluid is a fully synthetic automatic transmission fluid. The requirement to supply several, constrained OEM brands is removed by this offering. The performance of CVT Fluid is comparable to, and frequently better than, that of the most popular CVT Fluids used in North America and supplied by top OEMs. In extremely complex variable gearboxes, CVT Fluid offers tailored anti-shudder performance for smooth power transfer as well as outstanding anti-oxidation and anti-wear protection.
What symptoms indicate a low transmission fluid level?
While you wait, it’s a good idea to become aware with the warning indications that your transmission fluid may be running low.
- Leaky transmissions.
- Slow Engagement of Gears.
- Poor Vehicle Acceleration
- The warning light for the check engine or transmission is on.
Checking the gearbox fluid while the engine is running is a must.
Comparable to the engine oil dipstick is the dipstick for transmission fluid. Your vehicle will determine the location. How to find the dipstick is as follows:
- Step 1: Start your automobile with the motor running and pop the hood. When checking the gearbox fluid, the car needs to be warm.
- Step 2: To find the transmission fluid dipstick on an inline engine, check behind the oil dipstick in the direction of the windshield.
- Step 3: Check to the right of your oil if your car has front-wheel drive. The dipstick for the gearbox fluid is probably next to the battery in your automobile.
Safety Advice: To access a particular plug at the bottom of a car with a manual gearbox, the vehicle must be elevated on a hoist. Consult a mechanic for advice on how to check transmission oil if you are unsure about performing this task on your own or if you lack the necessary tools.