Digital clock adjustments are offered in automatic and manual modes:
You can choose between the automated and manual modes by carrying out the following actions:
1. To turn the audio system ON, press the PWR switch (A).
2. Press the TUNE switch (B) for two seconds to access the function setup mode.
, or more.
3. To choose the CT (Clock Time) mode, continually press the TUNE switch (B).
AFCTREGTP-SLanguage of PTY displaySCVPHONE is the order.
MODE OFF for the function setup (refer to Function setup mode, 5-52).
NOTE:
4. Select ON or OFF by turning the TUNE switch (B) left and right.
You can exit the function setup mode after choosing a mode by taking either
of the subsequent actions:
By utilizing the signal from the clock in the automated mode, the local time can be set
the nearby RDS broadcasters. CT (A) is displayed on the screen in this mode. Consult the radio
system of data (RDS), 5-46.
If the automatic mode displays the inaccurate information, the manual mode is also available.
periods of time when the nearby local RDS stations are situated in several time zones.
Observe RDS 5-46, Radio Data System.
1. Hold down the CLOCK button until the time display starts to flash.
2. To change the time, press the necessary buttons.
3. To stop the time display after the time has been set, hit the DISP button.
flashing.
In the event that the battery cables are severed during maintenance or for any other reason,
After reconnecting, set the clock back to the proper time.
There isn’t a second display on the digital timepiece. the minute display starts
When modified and reset to zero, the selected time’s clock starts at zero seconds
minute.
How does a 2018 Mitsubishi Outlander change the time?
Select the clock icon on the home page. Click the next page “Clock Setup. By using the + andbuttons, you may change the date, year, and time under the Time tab. When you are completed, click “Done.
How does a Mitsubishi Mirage’s clock work?
- Turn the ignition on with the key. To activate the radio, switch it to the accessories setting.
- On the screen, click the Setup menu.
- To continue adjusting the time and date on your radio, tap the clock menu.
- The time and date can be changed by touching the + and – buttons on the radio screen’s clock configuration.
- Changes made to the clock. You can choose whether to turn on or off the GPS time, Daylight Savings, and 24 Hours on the screen.
On the clock, the time zone. If you want to change your time zone, tap on the other time zone on your radio screen. The GPS will automatically show you the time zone you are in.