Digital clock adjustments are offered in automatic and manual modes:
You can choose between the automated and manual modes by carrying out the following actions:
1. To turn the audio system ON, press the PWR switch (A).
2. Press the TUNE switch (B) for two seconds to access the function setup mode.
, or more.
3. To choose the CT (Clock Time) mode, continually press the TUNE switch (B).
AFCTREGTP-SLanguage of PTY displaySCVPHONE is the order.
MODE OFF for the function setup (refer to Function setup mode, 5-52).
NOTE:
4. Select ON or OFF by turning the TUNE switch (B) left and right.
You can exit the function setup mode after choosing a mode by taking either
of the subsequent actions:
By utilizing the signal from the clock in the automated mode, the local time can be set
the nearby RDS broadcasters. CT (A) is displayed on the screen in this mode. Consult the radio
system of data (RDS), 5-46.
If the automatic mode displays the inaccurate information, the manual mode is also available.
periods of time when the nearby local RDS stations are situated in several time zones.
Observe RDS 5-46, Radio Data System.
1. Hold down the CLOCK button until the time display starts to flash.
2. To change the time, press the necessary buttons.
3. To stop the time display after the time has been set, hit the DISP button.
flashing.
In the event that the battery cables are severed during maintenance or for any other reason,
After reconnecting, set the clock back to the proper time.
There isn’t a second display on the digital timepiece. the minute display starts
When modified and reset to zero, the selected time’s clock starts at zero seconds
minute.
In This Article...
How can I reset the radio in my Mitsubishi Outlander?
Yes, you can modify the settings on a Mitsubishi Navigation System to make all the doors unlock: Then select Power Door Locks > Unlock Operation under SET > Equipment. Using the buttons on your FAST-key fob, you can still modify the settings if you don’t have a navigation system:
- First, hold down the Lock #1 button.
- Step 2: Press and hold Lock #1 for four seconds, then press and hold Unlock #2 for four seconds (do not allow more than ten seconds to pass).
- Step 3: Continue to hold both buttons down, and then let go of Lock #1 first.
- Release the Unlock #2 button second in step four.
Without a key fob, how do you start a Mitsubishi Outlander?
Pushing the lock release buttons on either side will allow you to remove the ignition knob cover (above right). Next, put the emergency key into the lock cylinder that is now visible (right). By pushing and then rotating the key, the vehicle can now be started traditionally.
Changing the time in a 2008 Mitsubishi Outlander is simple.
The audio system can be activated by pressing the PWR switch (A).
By tapping the various buttons as listed below, you can set the time.
- Till the time display flashes, keep the CLOCK button depressed.
- The time can be changed by pressing the relevant buttons.
- The time display will cease flashing after you hit the “DISP button after setting the time.
How does a 2018 Mitsubishi Outlander change the time?
Select the clock icon on the home page. Click the next page “Clock Setup. By using the + andbuttons, you may change the date, year, and time under the Time tab. Click when you are done “Done.