owners of different Mitsubishi cars, like the
Eclipse Cross, Lancer, ASX, Montero, Outlander Sport, Mirage, Mirage G4, and Mirage
These DIY instructions may also apply to the Sport, Pajero, Xpander, Strada, and RVR.
to be of service.
The matching light bulb replacement component
These are the specs for the 2020 Mitsubishi Outlander SEL: High Beam # 9005, Front Turn Signal PY21W (amber/orange), Low Beam # H7, and Front
W5W is a side marker (or 2825).
If you’d prefer to have headlights that are
would also not burn out as quickly as the conventional halogen bulbs
furthermore to incandescent lights, add some H7
units for LED, 9005 LED, PY21W LED, and W5W LED.
Observation: Please confirm the
prior to purchasing, look up the part numbers in your owner’s manual or on the old bulbs.
fresh ones. Depending on the model year, the correct part numbers may change.
your geographical region and trim level.
the potential equipment required to reach the bulbs
Depending on the type of bulb that needs to be changed consist of a flat head
removal of a burst rivet and a screwdriver
tool.
The hood must be opened, and the first two stages are
then make your way around to the side of the car that has the burnt-out light bulb.
In close proximity to the center of the
The housing and lens have an eye-like appearance.
Remove the headlight housing by reaching behind it.
by turning the circular black plastic dust cover a quarter turn in the
rotating counterclockwise. Put the dust cap away in a secure location.
PTP Responsive Replace Old 336×280 Index begins with!webbot bot=”HTMLMarkup” and finishes with!webbot bot=”HTMLMarkup” with an i-checksum of 26938.
Pull the old halogen light bulb out slowly.
directly from the electrical connector made of black plastic.
If you experience difficulty removing the old bulb
Try gently jiggling the lightbulb back and forth while pulling it away from the socket.
on it.
If
If the replacement bulb becomes filthy, clean it with a paper towel and some
Rub-On Spirits
Any grease or oil that remains on the glass could
create a hot area that could lead to the bulb prematurely failing.
Insert a fresh H7 into the socket. Ensure that the
Fully seated in the socket is the replacement bulb.
the socket back into the housing, and
1/4 of a turn clockwise should be made.
Pry open the single black plastic disc from the middle.
Using a flat head screwdriver, pop rivet.
Step out of the washer fluid fill tube
a long distance back in the engine compartment.
Turn the cover off 1/4 turns in the
rotating counterclockwise. Place the cover aside in a secure location.
the electrical release tab must be depressed.
before removing it from the previous high beam bulb, attach the connector.
Put a fresh 9005 bulb directly on the power.
plug. The connector should “click” firmly into place.
Do not touch the new glass component.
bulb. If it does become soiled, you can clean it with an alcohol wipe.
If you want your high beams to be brighter
Install some appropriate replacement 9005 LED bulbs for the lights.
Back into the washer fluid fill tube
Put it in place and fasten it with a pop rivet.
It is necessary to remove the turn signal bulb.
you must take out two pop rivets on the air intake component using a socket.
On the plastic radiator cover, there are 10 more pop rivets.
There are a total of 12 pop rivets that must be placed.
be removed so that the front turn signal bulb socket may be easily reached.
Raise the middle to release the pop rivets.
Use a flat head screwdriver to remove the central button or “pin” of each fastener.
then use to pull off the fastener’s base
either a pop rivet removal tool or a screwdriver.
Before installing the bulb, turn the socket 1/4 degree counterclockwise.
pulling it out directly.
The old bayonet-style lightbulb needs to be removed.
Insert it into the socket, then spin it 1/4 turns counterclockwise.
before bringing it out in a straight line.
If you want more illumination
Install appropriate replacement PY21W LED (amber/orange-colored) in the front turn signal lights.
bulbs.
Put the light plug back into the housing and
1/4 of a turn clockwise should be made.
You already own a radiator cover, so
I suggest swapping out the other front turn signal light bulb at the
the same time to prevent having to repeat this process soon.
Make
make certain that the pins or buttons in the elevated center of each pop rivet
and the unlocked state.
The two somewhat larger pop rivets should be replaced.
into the engine air intake assembly’s leading edge.
The location of the front side marker light is at the
outside headlight assembly corner.
If you experience difficulty removing a stuck or
Old light bulb that won’t go out due to rust or other obstructions like sand
Put on some safety gloves, then try gently moving the bulb.
while yanking it out straight.
If you want your front side to be more colorful
Install some appropriate replacement W5W LED units in your marker lights.
Put the lightbulb socket back into the hole in
the housing and give it a quarter-turn in the direction of the clock.
Turn on the light to test the new bulbs.
turn on the hazard lights, turn on the high beams, and flash the headlights.
Please review each of the
Mitsubishi Outlander DIY Repair & Maintenance Manuals, 20142021.
In This Article...
Do Mitsubishi Outlander’s headlights contain LEDs?
The tiny SUV’s basic LED reflector headlights now receive an excellent grade. Due to upgraded lighting, the 2022 Mitsubishi Outlander small SUV is eligible for the Insurance Institute for Highway Safety’s Top Safety Pick+ designation.
How much does a Mitsubishi Outlander headlamp cost?
For your 2019 Mitsubishi Outlander, we presently offer 9 Low Beam Headlight Bulb products with prices ranging from $5.13 to $76.99 in our inventory. For the 2019 Mitsubishi Outlander, Advance Auto Parts provides Reasonable Beam Headlight Bulb products from 5 different reliable brands in addition to low pricing.
What headlight bulb do I need, and how do I get it?
You can also get fitting information from your car’s manufacturer, or you can just look in your owner’s manual, which should list all the fittings your car needs for each kind of light.
You can take the headlight off and examine the bulb if you’re a little more hands-on and competent with tools. The fitting name, such as “H7,” will be written around the bulb’s housing. Look at this illustration:
The Mitsubishi Outlander is produced where?
The Mitsubishi Outlander is the ideal compact SUV for people seeking for a car with seven seats because it is made in Japan using cutting-edge technology. It has undergone a redesign to actively compete in the compact SUV segment. The vehicle provides a comfortable ride and comes with a lengthy guarantee and user-friendly technological features. Because of the underwhelming engine and transmission combination, it could not perform as expected if you plan to drive it on the highway.
Mitsubishi Outlander is produced by who?
A small crossover SUV made by the Japanese automaker Mitsubishi Motors is known as the Mitsubishi Outlander (Japanese:, Hepburn: Mitsubishi Autorand). When it was first presented in Japan in 2001, it was known as the Mitsubishi Airtrek (Japanese:, Hepburn: Mitsubishi Eatorekku).
What is the price of a new Mitsubishi Outlander?
The starting price of the 2022 Mitsubishi Outlander is $25,795. That’s about average for the compact SUV class . The top of the line SEL Launch Edition costs $35,345 and is priced similarly to the highest trims of the majority of competitors.