If you are merely replacing the brake pads on a Mitsubishi Outlander, the cost to do so ranges from $195 to $300. This cost increases to $450 to $600 if you replace the rotors at the same time.
You will spend $50 to $150 on parts if you decide to change your Mitsubishi brake pads and rotors by yourself.
In This Article...
Can I replace my own brake pads?
- Depending on your vehicle and driving style, brake pads should be replaced every 25,000 to 75,000 miles. You’ll discover that most professionals and automakers advise changing your brake pads every 50,000 miles on average.
- As part of your standard inspection, ask your mechanic to check your brake pads on a regular basis. Always remember to examine your brake pads to see if they appear worn if you prefer to perform your own vehicle inspections. When you notice severe wear on your brake pads, replace them right once to keep your car safe.
- Squealing, squeaking, and grinding noises are indications of wear. It’s probably time for a replacement if your automobile pulls to one side more than the other when you press the brake pedal or if you experience bouncing when coming to a stop.
- Your car’s performance, dependability, and safety can all be enhanced by replacing the brake pads. You can tackle replacing your own brake pads as a DIY project if you’re confident performing your own vehicle maintenance. As with any auto modification or repair, check your owner’s manual for any special instructions or instructions before you start.
What is the price of replacing the brakes on a Mitsubishi Outlander?
Best in Automotive Repair Replacement brake pads for a Mitsubishi Outlander typically cost between $196 and $218. The cost of labor is expected to be between $85 and $107, while the cost of parts is $111. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account.
How much does a Mitsubishi brake pad replacement cost?
Generally speaking, labor charges range from $100 to $150. Add the price of your new pads to that. This may cost as little as $50 per axle or as much as $100 each axle (on the higher end). Therefore, the overall cost, including labor and parts, will be between $150 and $300 per axle.
How durable are Mitsubishi brake pads?
How frequently do the brake pads on a 2020 Mitsubishi Outlander need to be changed?
It mostly depends on the terrain and your driving style.
Brake pads typically last between 30,000 and 40,000 kilometers.
Your brake pads may last longer if you generally go on highways and brake smoothly.
Your brake pads may wear out more quickly if you often transport big items or ride your brakes.
The type of brake pads on your Outlander will determine how frequently you need to repair them.
Certain types of brake pads tend to live longer than others.
Fortunately, Firestone Complete Auto Care provides a limited Lifetime Parts Warranty on brake pad replacement for Mitsubishi Outlanders.
Some of our most well-liked services are brake inspections and brake pad replacements. We will use brake parts for your Outlander that are up to Mitsubishi’s standards or better.
When changing pads, do the brakes need to be bled?
Your braking system is the most important one in terms of essential parts. You must be able to stop at any time, no matter how quickly you’re moving. Hydraulic braking systems for vehicles operate by pushing pressurized fluid. There will be less pressure, spongy-feeling brakes, and lengthier stops if there is an air bubble in the system. But that’s only the start. The car might not stop at all if left unattended.
There is a technique to avoid this in addition to fixing it. Let’s examine when and how brakes should be bled.
When to Bleed Your Brakes
First off, you aren’t truly bleeding brakes; rather, you are removing air bubbles that may have developed prior to pouring fresh brake fluid by bleeding fluid and air out of the braking system.
When should you bleed your brakes?
- when the brakes begin to feel soft.
- when pauses take longer and you start to lose confidence.
- if you discover a leak Air may also be let in through leaks in addition to fluid. Bleeding your brakes after fixing the leak is the only way to ensure that your system isn’t affected by an air bubble.
- if you’re changing out worn-out brake pads, as this could lead to air getting into the master cylinder. More brake fluid is needed while braking with worn brake pads, which empties the reservoir and leaves room for air.
- if you replace your brake pads or rotors. For the purpose of safety, every brake job needs to include a brake bleed.
- As part of good preventive maintenance, once a year.
How to Bleed Your Brakes
You’ll need a screwdriver for Torx screws (detectable by the six-pointed groove on their heads), as much fresh brake fluid your car needs, and a container to catch the used fluid for all four methods of bleeding brakes.
Here are the four techniques for bleeding brakes:
- Put a container underneath the bleeder screw, turn the screw to let the old fluid fall into the container by gravity. Afterward, there will be cleanup. The liquid won’t fall in a straight line; instead, it will drip down components in the space between the container and the bleeder screw.
- By hand: Place a container beneath the bleeder screw and open it as someone gently presses and releases the brake pedal, forcing the fluid and air out of the system. Smoothly use the brakes to prevent the formation of further air bubbles that could linger and contaminate the fresh fluid. Make sure the fluid isn’t frothy, as that indicates that new air bubbles are beginning to form.
- Once more, place a container under the bleeder screw and open it to provide pressure. The fluid and air should then be forced through the system and into the container using a tank of pressurized braking fluid at the master cylinder.
- Vacuum: For this technique, when you open the bleeder screw, fasten a vacuum bleeder to it. It extracts the liquid and air into a connected container.
Regardless of the route you take, bleeding your brakes when there is a problem or as part of routine maintenance ensures that your braking system operates as effectively as possible and keeps you and your passengers safe.
NAPA Online has a comprehensive selection of brake fluid; or, visit one of our 17,000 NAPA AutoCare facilities for regular maintenance and repairs. Visit your neighborhood NAPA AUTO PARTS store to speak with a trained specialist for more details on bleeding your brakes.
What equipment will I need to replace my brake pads?
Most of the equipment required to change brakes is probably already in your toolbox or garage. If not, buying these tools is essentially an investment since the majority of them may be put to a variety of other uses. The equipment needed to change brakes is shown below.
Start With the Right Protection
Make sure you are adequately protected before beginning any work on your car. To prevent breathing in brake dust, you should wear a dust mask, protective eyewear, and a pair of mechanic’s gloves to protect your hands.
Brake Pads and Rotors
Make sure you have the appropriate replacement components on hand for the job before you begin. This applies to brake fluid if you plan to bleed your brakes while the brakes are being replaced, as well as brake pads and rotors if those are being replaced.
Jack and Jack Stand
To work on the brakes, you’ll need to remove the tires from the car, so you’ll need a jack and jack stand. Your car probably came with a jack so you could change those annoying flats, but a service jack is considerably more useful. Additionally, you need to buy jack stands. These increase the stability of your car while it is elevated and lessen the possibility that it will slide and crash while you are adjusting your brakes. NEVER work underneath a car that is only being held up by a jack.
Lug Nut Wrench
Before lifting the automobile and setting it on jack stands, the lug nuts should be removed. Use the lug nut wrench to completely remove the nuts once the vehicle’s weight is securely supported by the jack supports. Then, remove the wheel to reveal the brakes.
To fit around the bigger, thicker brake pads, the piston or pistons must be retracted. Using a brake caliper tool is the simplest way to accomplish this (or a C-clamp will do in a pinch). Depending on the caliper, the piston may need to retract by being compressed while also being turned. Here is where a specialized tool excels.
Brake Bleeder Wrench
A brake bleeder wrench may or may not be required from the list of tools required to change brakes, depending on the task. You need this tool to check sure there isn’t any air trapped in the hydraulic lines if you disconnected the brake hose to replace the brake calipers.
Allen Wrench Set
Another perhaps, but an Allen wrench set is a necessity for anyone who intends to work on their car. As the brake calipers are frequently secured in place by Allen bolts that must be removed, it is one of the tools required to change brakes.
Depending on the task, lubricants and greases can also be required, but having at least these fundamental tools on hand guarantees that you’re prepared to change your brakes.
You can easily and safely repair the brakes on your car with the help of these tools. If you don’t already have a set of these tools, buying one is a good idea because maintaining your car’s brakes is an essential component of car ownership.
If you need routine maintenance and repairs, turn to one of our 17,000 NAPA AutoCare locations or browse all the brake system parts we have available on NAPA Online. Speak to a qualified specialist at your neighborhood NAPA AUTO PARTS shop for further details on the parts you need to change the brakes on your automobile.
How much time is required to replace the front brake pads?
Brake pad replacement can be completed in 4 hours if you have familiarity with simple repairs. If you have prior expertise performing minor repairs, changing front brake pads will take roughly 4 hours because it is easier than replacing rear disc brakes.
Brakes for a 2018 Mitsubishi Outlander cost how much?
Whatever the circumstance, Advance Auto Parts carries the Rear Brake Pads item you sorely require. For your 2018 Mitsubishi Outlander, we now have 12 Rear Brake Pads products with prices ranging from $27.99 to $88.90 in our inventory.