The taillight assembly should be pulled out of the truck’s back end and forward. Close to each tab on the edge of the tail light lens, place a flat head screwdriver. To get to the bulbs, pry apart the lens. Remove the top bulb from the socket by pulling it.
In This Article...
On an Audi A4, how do you replace a brake light?
You may as well clean while you have the taillight off. To keep my car looking extra clean, I used a spray detailer to remove the dust from below the tail light:
Align the nubs of the new bulbs, then turn them a quarter turn to lock them in place. Check it out briefly before tightening the tail light back in. You don’t even need to go in your car to accomplish this; simply pressing the lock button will turn on the tail light. Just leave the brake light housing rest on the ledge after plugging it back into the vehicle. Then, press the lock button to make sure everything is working.
On a Pajero, how do you replace the headlight bulb?
Let’s complete this.
- Find the headlamp assembly’s back.
- Unplug the wiring.
- the rubber dust cover must be removed.
- Retaining clip removed.
- Change the bulb (Try not to touch the glass, if you do, clean with a soft cloth)
- invert the order of assembly.
How can a brake light be changed?
Replacing a Tail Light
- Step 1: Open the tailgate or trunk.
- Step 2: Remove the tail lamp assembly (if needed)
- Step 3: Remove the bulb.
- Step 4: Insert a replacement bulb after adding bulb grease.
- Step 5: Reattach the component (if needed)
- Repeat step 6 on the opposite side.