For as little as $3,499, a ductless heating and cooling system can be fully installed and ready to use. Prices rise from there, depending on a variety of variables.
In This Article...
Ductless Systems Are Whisper-Quiet
You may already be aware of the benefits of ductless heating and cooling for your house, including lower energy expenses and, in certain cases, a return on investment in terms of energy savings.
But what can a homeowner in Central Pennsylvania expect to pay for this cutting-edge, practical heating and cooling solution?
Although ductless mini-split technology has been around for more than 50 years and dominates the HVAC market in Europe and Asia, Pennsylvania households have only had access to it for roughly thirty years.
The adoption of ductless technology in the United States has been slowed down by lack of knowledge and sporadic access to educational materials, but its effectiveness has prompted large utility companies, governmental organizations, and homeowners to take note.
One of the HVAC industry’s fastest expanding methods of home heating and cooling is ductless technology, which comes with financial benefits. How much would it cost you to install a Mitsubishi ductless system in your home? It depends, really.
Four main criteria primarily impact the cost of a ductless system:
- The unit’s dimensions
- The unit’s kind
- The quantity and size of the zones (or territories) being covered
- The degree of installation difficulties (how far the indoor and outdoor units are from each other, the construction of the outer wall to be drilled to carry the line sets, etc.)
There are numerous configuration options with these systems (whole house, partial house, one room, etc.) that can move your project from the lower end of the cost spectrum to the highest. At its most basic, a ductless system consists of:
Single Zone Mitsubishi Dustless Installation
The cost of professional installation for the simplest, or single zone, arrangement (which consists of a single wall unit and condenser) ranges from $2,800 to $4,500. Numerous uses, including heating and cooling a sunroom, garage, attic, and some smaller homes, are appropriate for this architecture.
A sun room may be comfortably heated or cooled all year long with just one ductless device.
Multi-Zone Mitsubishi Ductless Installation
Some Pennsylvania residents just require a single ductless air conditioner, whereas other applications benefit more from 3, 4, or 5 units. Everything depends on how your house is set up and what suits you the best.
A two indoor evaporator unit multi-zone system normally costs between $5,900 and $7,500.
If you want to have your system prepared for future extension as budgets permit, we can operate up to five interior units with a single outdoor condenser. We can even come back and add indoor units later.
Depending on the features, a 5-zone system can cost you between $12,000 and $20,000.
Is Ductless A Good Value For My Money?
Although the initial cost of ductless heating and cooling may appear high, you will ultimately save a lot of money because to their increased energy efficiency. You won’t lose energy due to leaking ductwork because there are no ducts.
Additionally, ductless systems require less upkeep than conventional ones. With a multi-zone design, you may independently manage the temperature in each room where an air handler is installed, which results in extra energy savings.
You won’t need to maintain a room’s temperature at the same level as the rest of the house if it isn’t being used.
How much does a ductless system for the entire house cost?
A ductless system can be installed for anywhere from $5,000 and $28,000, with an average cost of $12,348. Mini-splits, commonly referred to as ductless air conditioners, provide homeowners a great deal of control over the temperature of each room in their house while reducing annual cooling expenditures by up to 50%.
Does a Mitsubishi mini split make sense?
Mitsubishi Electric’s Zoned Comfort SolutionTM, which refers to a line of extremely effective and high-performance single-zone and multi-zone cooling and heating mini split solutions, is a ductless system option. Two installation choices for the Mitsubishi Electric Zoned Comfort Solution are available:
- single-zone heating and cooling. One outside unit and one interior unit work together as a system to allow you to properly control the temperature in a particular room or specified space.
- multi-zone heating and cooling. One outdoor unit is connected to up to eight indoor units, creating a system that allows you to regulate the temperature in several separate rooms, each of which can be adjusted to a different temperature.
- Comfort Zoned Solution
- Allergen Filtration Using Multiple Layers
- 40% Greater Efficiency
- Styles That Go With Your Personality
The majority of Mitsubishi Electric mini splits are Energy Star-rated, have higher SEER ratings, are up to 40% more efficient than conventional systems, are designed to provide the best cooling and heating performance, and are fully furnished with intelligent, potent, and cutting-edge functionalities, features, and technologies. These include, among many other things, remote system management and control, an inverter-driven compressor that uses less energy, Hyper-Heating INVERTER (H2i) technology, and hot-start technology. These systems are relatively simple to install, function silently, and are designed to be unobtrusive.
The ductless mini split models come with a set of smart wired, wireless, and handheld remote controllers, use the ozone-friendly refrigerant R410A, have better filtration technology and washable air filters that can last up to 10 years, and are available in 6,000, 9,000, 12,000, 15,000, 18,000, 24,000, 30,000, and 36,000 BTU configurations. The interior unit of ductless mini split systems is offered in a variety of styles, including wall-mounted, horizontal-ducted, ceiling-cassette, ducted air handler, and floor-mounted, to give you more alternatives.
The various series that make up the Mitsubishi ductless micro split systems are divided into models that are tailored for certain special uses. The following are three of the top air conditioning options:
These modern, incredibly quiet, and highly effective room air conditioners are made to fit in small to medium-sized rooms. These cooling/heating options are compact and discreet, making them suitable for use in any room setting, including small offices, houses, and other business or domestic small spaces. Although some fixed-speed variants are also available for heat pump and cooling solutions solely, all M Series models are constructed using the robust inverter-driven compressors. The indoor units for the inverter-driven variants come in wall-mounted, compact floor, or 1-way cassette varieties. The MSZ-F series, MSZ-G series, MSZ-H series, and MSZ-S series all have wall-mounted models. The 1-way cassette units are part of the MLZ series, whereas the compact floor variants are part of the MFZ series. On the other hand, the fixed-speed variants, which include the MS(H)-G series, are often only wall-mounted.
This is a line of strong, very energy-efficient packaged air conditioners that are suited for medium-sized spaces like offices, stores, server rooms, and even restaurants. They were created with commercial applications in mind. The Mr. Slim models, a line of very efficient units with high SEER ratings, utilize much less energy than conventional systems in the same settings. Additionally, these machines are developed with cutting-edge control features and are incredibly quiet and unobtrusive. The majority of Mr. Slim models use Power Inverters, while some also use Standard Inverters. R32, a more environmentally friendly refrigerant, is also used. The Mr. Slim indoor units come in a variety of styles, including wall-mounted ceiling cassette, suspended ceiling, and ceiling concealed ducted.
The MXZ versions are intended for multi-system air conditioning and provide exceptional energy efficiency as well as flexibility when expanding the ductless solution in a multi-room setting. Applications that call for connecting several indoor units to one outdoor unit can use the MXZ units. Eight (air handlers) can be used, spread among the same number of rooms, but only one exterior unit is required. If you want to have comfort throughout your entire home but don’t want to use more than one outdoor unit, MXZ Multi-splits are your best option.
It has been established that the best way to address the cooling and heating issues that traditional systems can’t handle is with a ductless mini split system. The ductless micro split systems from Mitsubishi Electric provide a high level of technology, efficiency, performance, and flexibility to satisfy your highest expectations in terms of comfort and convenience despite these constraints. Mitsubishi ductless systems are an excellent solution for your heating and cooling needs because they are constructed with high-tech components and are intended for a variety of purposes. Choose from one of the several Mitsubishi ductless mini split systems we have available to get the ideal unit for your home.
How much does installing a Mitsubishi cost?
Mitsubishi Ductless Installation for a Single Zone It will cost between $4,000 and $6,500 to have a professional install the single zone arrangement, which consists of one wall unit and condenser.
A ductless air conditioner can cool how many square feet?
Mini-splits, often known as ductless air conditioners, are a quick and effective way to cool your house. Every homeowner’s decision to install a mini-split will typically be influenced by a variety of factors. The size of your house, the number and size of the rooms you want to cool, and the configuration of your current HVAC system are a few crucial factors to take into account. However, how much space can a single ductless air conditioner cool?
Smaller units typically start at around 9,000 BTUs and can cool about 350 square feet of space, while larger ductless systems with a BTU of 36,000 can efficiently cool a room of up to 1,500 total square feet (the size of approximately 2-3 bedrooms).
Similar to other types of AC units, ductless air conditioner systems are available in a range of capacities and can be set up for various home or office HVAC configurations. Before investing in a mini-split system, it’s critical to understand the ductless unit’s capacity for your house. We’ll go over some of the variables that go into calculating this in this post. Let’s look at it.
Are tiny splits energy-intensive?
Individual rooms or regions of your home can be cooled or heated using mini-split systems. They might therefore use less energy than central HVAC systems. But you’ll probably want to ask yourself, “Do mini-splits use a lot of electricity? ” before you put one in your house.
Mini-splits are an energy-efficient solution because they typically use much less electricity than central air conditioning and heating systems. The majority of them use 600 watts per hour or less. However, energy use varies according to use, temperature settings, and the state of the appliance.
How many micro splits will I need for a home that is 1500 square feet?
This is a typical inquiry regarding the necessary quantity of mini splits. A 1,500 square foot home would require roughly 30,000 BTU (2.5 tons) of cooling output, which translates to the demand for one, two, or three micro splits (we talk about single-zone, 2-zone, and 3-zone mini splits).
Now, we frequently receive inquiries about the ideal number of small splits to install. Here are just a few of them (we’ll address and respond to each one later on):
- “A micro split can cool how many rooms?
- “Do all the rooms need mini splits?
- “A micro split can cool how many square feet?
- “For a mini split, how many BTU are there per square foot?
Single-zone mini splits and multi-zone (2-zone, 3-zone, 4-zone, 5-zone, 6-zone, 7-zone, 8-zone) micro splits account for 77% of all air conditioners globally, according to Statista’s 2016 analysis. The most common sort of AC unit used today is a mini split, therefore it’s not surprising that so many people are attempting to calculate the number of mini splits they require.
We have provided a Mini Split Number Calculator and Mini Split Number Chart below to assist everyone in determining how many mini splits they require. To determine how many mini split units you require, you can speak with either of them.
Let’s first understand how these multi-split calculations operate and then tackle some questions that come up.
How to determine whether you require 1, 2, 3, 4, 5, or more micro splits is as follows:
- Determine the necessary BTUs based on the size of your home (primary factor). Typically, we follow a 20 BTU per square foot guideline. Example: You would require 1,50020 = 30,000 BTU output for a dwelling with 1,500 square feet. Use one mini split with 30,000 BTUs, two with 15,000 BTUs, or three with 10,000 BTUs.
- Be mindful of the airflow and entrances to various areas (secondary factor). It is insufficient to match the cooling output (BTUs). The airflow from a single 30,000 BTU mini split, for instance, won’t be sufficient to reach every room in a bigger space. Hot pockets and uneven temperature distribution will be what’s left. The chilly air cannot enter a closed room if the doors are closed.
We can simply determine how many mini splits you need based on these two variables. We’ll demonstrate how to compute BTUs, the available mini split indoor handler sizes, and how many mini splits are required for how many rooms. Let’s use the BTUs now:
Mini splits last how long?
An HVAC system’s service life is type-dependent. The typical lifespans of common HVAC equipment are as follows:
- Furnaces Gas furnaces typically survive 20 to 30 years or longer with regular maintenance. A furnace is typically replaced when the heat exchanger begins to leak because it is one of the most important and expensive parts. While oil furnaces normally survive just 10 to 15 years due to maintenance issues brought on by the inefficient fuel, systems that are badly maintained or of questionable quality may only last 10 years.
- BoilersBoilers typically have a lifespan of 20 to 35 years, which is slightly longer than that of furnaces. They are typically changed when the heat exchanger begins to leak.
- Most air conditioners have a lifespan of 15 to 20 years, while some may only last 10 years or less. They normally only endure seven to twelve years in coastal areas because of salt exposure. When the compressor breaks down or the condenser develops substantial corrosion and leaks, both air conditioners and heat pumps are typically replaced.
- Heat pumpsHeat pumps typically last 15 years, although they can survive 10 to 20 years depending on usage. Heat pumps perform similarly to air conditioners in terms of functionality, but because they can also offer warmth and cooling, they are often utilized for longer periods of time each year. With typical lifespans of seven to twelve years, heat pumps in coastal regions will also break down early.
- A/C units without ducts
- Ductless mini-splits, like heat pumps, can provide both heating and cooling, and, with the exception of coastal environments, have an average lifespan of 10 to 30 years.
Even though this is the average lifespan, many homeowners decide to replace their HVAC system earlier. The system will gradually lose efficiency and dependability as it ages, raising maintenance and utility expenses. The monthly energy savings from upgrading to a newer, more efficient model after a system has been in operation for 10 to 15 years can frequently justify the initial cost, particularly if the present system is unreliable or has significant issues.
A small split can it cool an entire house?
It’s a frequent fallacy that the only way to chill an entire house is with central air conditioning. While still a possibility, ductless mini split systems should also be taken into account.
Even though a strong system is required, particularly in a large home, a ductless mini split is capable of handling the job. It is capable of chilling a full house, from the basement all the way up to the attic, with the proper size system in place.
A ductless mini split may be the solution to your cooling issues for the following reasons:
Should I always leave my tiny split on?
You are undoubtedly already aware of the advantages of effective heating and cooling, zone temperature control, and silent operation if you have a mini-split heat pump system. Mini-splits are simple to use and require little upkeep. Check out these seven suggestions to get the most out of your mini-split heat pump system and increase summer comfort while maximizing its efficiency and reducing energy bills.
Don’t obsess on the phone number. You might find that you need to set your mini-splits’ temperature higher or lower than you anticipated while using the remote control. This is partially caused by the temperature being recorded at the inside air handler unit level, which is normally 7-8 feet above the ground. Choose a situation where you feel most at ease and stick with it.
Just forget about it. When a mini-split system runs continuously, that is, around-the-clock, it uses less energy and maintains temperatures the best. In addition, unlike a thermostat-controlled central heating and cooling system, you don’t need to turn the units on and off or change the temperature settings while you’re away.
You don’t need to select a fan speed. When in AUTO mode, the air handlers will automatically alter the fan speed to maintain comfort and save energy consumption.
To ensure that your system circulates cool air properly and efficiently, perform some routine maintenance. During the summer, take off the air handlers’ covers to occasionally clean the air filter and wipe down the evaporator coils with a soft cloth. Make sure the exterior unit is clean and free of debris. Make sure to turn off the power to the system before using a garden hose to rinse it off.
Condensation that accumulates on the evaporator coils while your system cools your home should drain outside. Condensate draining away from the external condenser unit should be checked. Your system may not be draining properly if you don’t see any while it’s operating; in that case, you should get in touch with a qualified heating and cooling specialist.
Your home will heat up in the summer, making your mini-split system work a little bit harder to keep it cool. However, you may give your cooling system a break by keeping the blinds and drapes drawn throughout the day, especially in the hottest portion of the day, the late afternoon.
Keep inside doors open to allow fresh air to circulate. Doors left open or closed may experience a difference of up to 5 F. Once more, this will make your system operate less frequently than is necessary, saving you energy and extending the life of the system.