For as little as $3,499, a ductless heating and cooling system can be fully installed and ready to use. Prices rise from there, depending on a variety of variables.
In This Article...
Ductless Systems Are Whisper-Quiet
You may already be aware of the benefits of ductless heating and cooling for your house, including lower energy expenses and, in certain cases, a return on investment in terms of energy savings.
But what can a homeowner in Central Pennsylvania expect to pay for this cutting-edge, practical heating and cooling solution?
Although ductless mini-split technology has been around for more than 50 years and dominates the HVAC market in Europe and Asia, Pennsylvania households have only had access to it for roughly thirty years.
The adoption of ductless technology in the United States has been slowed down by lack of knowledge and sporadic access to educational materials, but its effectiveness has prompted large utility companies, governmental organizations, and homeowners to take note.
One of the HVAC industry’s fastest expanding methods of home heating and cooling is ductless technology, which comes with financial benefits. How much would it cost you to install a Mitsubishi ductless system in your home? It depends, really.
Four main criteria primarily impact the cost of a ductless system:
- The unit’s dimensions
- The unit’s kind
- The quantity and size of the zones (or territories) being covered
- The degree of installation difficulties (how far the indoor and outdoor units are from each other, the construction of the outer wall to be drilled to carry the line sets, etc.)
There are numerous configuration options with these systems (whole house, partial house, one room, etc.) that can move your project from the lower end of the cost spectrum to the highest. At its most basic, a ductless system consists of:
Single Zone Mitsubishi Dustless Installation
The cost of professional installation for the simplest, or single zone, arrangement (which consists of a single wall unit and condenser) ranges from $2,800 to $4,500. Numerous uses, including heating and cooling a sunroom, garage, attic, and some smaller homes, are appropriate for this architecture.
A sun room may be comfortably heated or cooled all year long with just one ductless device.
Multi-Zone Mitsubishi Ductless Installation
Some Pennsylvania residents just require a single ductless air conditioner, whereas other applications benefit more from 3, 4, or 5 units. Everything depends on how your house is set up and what suits you the best.
A two indoor evaporator unit multi-zone system normally costs between $5,900 and $7,500.
If you want to have your system prepared for future extension as budgets permit, we can operate up to five interior units with a single outdoor condenser. We can even come back and add indoor units later.
Depending on the features, a 5-zone system can cost you between $12,000 and $20,000.
Is Ductless A Good Value For My Money?
Although the initial cost of ductless heating and cooling may appear high, you will ultimately save a lot of money because to their increased energy efficiency. You won’t lose energy due to leaking ductwork because there are no ducts.
Additionally, ductless systems require less upkeep than conventional ones. With a multi-zone design, you may independently manage the temperature in each room where an air handler is installed, which results in extra energy savings.
You won’t need to maintain a room’s temperature at the same level as the rest of the house if it isn’t being used.
What is the price of a Mitsubishi ductless system?
Installation of a Mitsubishi Ductless Single Zone Mini Split It will cost between $2,800 and $4,500 to have a professional install the single zone system, which consists of one wall unit and condenser.
Mitsubishi wall heater costs how much?
According to Mitsubishi, you should budget at least $4,000 to $5,500 for each zone. The general average estimate ranges from a minimum of $4,000 to a high of $20,000 for the whole-home comfort solution.
How much does installing a Mitsubishi cost?
Mitsubishi Ductless Installation for a Single Zone It will cost between $4,000 and $6,500 to have a professional install the single zone arrangement, which consists of one wall unit and condenser.
Can I put in ductless AC myself?
A condensing unit outside the house, an air handler within the house, refrigerant lines connecting the units, and electrical wire powering the units are all necessary for a DIY mini split installation. Because the refrigerant line needs to be cut and charged, the majority of ductless mini split systems are installed by a professional. You may put up the air handler and condenser on your own while hiring a technician to finish the refrigerant line installation.
Select a tiny split system that fits your space before you begin the installation process. Following are your choices:
- Ductless mini splits for one zone. These are made to heat or cool a single room, such as a bathroom, kitchen, extension, attic, or garage. The units have a single condenser and an individual air handler. The smallest and simplest systems to install are these.
- ductless mini splits with two zones. These tiny split units include two air handlers that are each powered by a separate condenser unit and are intended to heat or cool two spaces. For a full house where it is necessary to manage the temperature in various rooms, dual-zone micro split air conditioners and heat pumps are the best option.
- ductless micro splits with many zones. Multi-zone mini splits have a condenser unit made to support several air handlers and are intended to heat or cool distinct zones. Always consult the manufacturer’s instructions when figuring out how to install micro split heat pumps on multi-zone models because these installations can be trickier than others.
The British Thermal Unit (BTU) output of the system will help you choose the proper size mini split for your room. The popular options for providing optimum temperature management for a variety of large and small spaces are t2 ton and f4 ton mini split systems. Measure your room and obtain square footage estimates before making a purchase. This will enable you to pick a tiny split with the right size and BTU output for the room. The product manuals from manufacturers include sizing recommendations in relation to BTU.
Are Mitsubishi split systems effective?
Mitsubishi Electric’s Zoned Comfort SolutionTM, which refers to a line of extremely effective and high-performance single-zone and multi-zone cooling and heating mini split solutions, is a ductless system option. Two installation choices for the Mitsubishi Electric Zoned Comfort Solution are available:
- single-zone heating and cooling. One outside unit and one interior unit work together as a system to allow you to properly control the temperature in a particular room or specified space.
- multi-zone heating and cooling. One outdoor unit is connected to up to eight indoor units, creating a system that allows you to regulate the temperature in several separate rooms, each of which can be adjusted to a different temperature.
- Comfort Zoned Solution
- Allergen Filtration Using Multiple Layers
- 40% Greater Efficiency
- Styles That Go With Your Personality
The majority of Mitsubishi Electric mini splits are Energy Star-rated, have higher SEER ratings, are up to 40% more efficient than conventional systems, are designed to provide the best cooling and heating performance, and are fully furnished with intelligent, potent, and cutting-edge functionalities, features, and technologies. These include, among many other things, remote system management and control, an inverter-driven compressor that uses less energy, Hyper-Heating INVERTER (H2i) technology, and hot-start technology. These systems are relatively simple to install, function silently, and are designed to be unobtrusive.
The ductless mini split models come with a set of smart wired, wireless, and handheld remote controllers, use the ozone-friendly refrigerant R410A, have better filtration technology and washable air filters that can last up to 10 years, and are available in 6,000, 9,000, 12,000, 15,000, 18,000, 24,000, 30,000, and 36,000 BTU configurations. The interior unit of ductless mini split systems is offered in a variety of styles, including wall-mounted, horizontal-ducted, ceiling-cassette, ducted air handler, and floor-mounted, to give you more alternatives.
The various series that make up the Mitsubishi ductless micro split systems are divided into models that are tailored for certain special uses. The following are three of the top air conditioning options:
These modern, incredibly quiet, and highly effective room air conditioners are made to fit in small to medium-sized rooms. These cooling/heating options are compact and discreet, making them suitable for use in any room setting, including small offices, houses, and other business or domestic small spaces. Although some fixed-speed variants are also available for heat pump and cooling solutions solely, all M Series models are constructed using the robust inverter-driven compressors. The indoor units for the inverter-driven variants come in wall-mounted, compact floor, or 1-way cassette varieties. The MSZ-F series, MSZ-G series, MSZ-H series, and MSZ-S series all have wall-mounted models. The 1-way cassette units are part of the MLZ series, whereas the compact floor variants are part of the MFZ series. On the other hand, the fixed-speed variants, which include the MS(H)-G series, are often only wall-mounted.
This is a line of strong, very energy-efficient packaged air conditioners that are suited for medium-sized spaces like offices, stores, server rooms, and even restaurants. They were created with commercial applications in mind. The Mr. Slim models, a line of very efficient units with high SEER ratings, utilize much less energy than conventional systems in the same settings. Additionally, these machines are developed with cutting-edge control features and are incredibly quiet and unobtrusive. The majority of Mr. Slim models use Power Inverters, while some also use Standard Inverters. R32, a more environmentally friendly refrigerant, is also used. The Mr. Slim indoor units come in a variety of styles, including wall-mounted ceiling cassette, suspended ceiling, and ceiling concealed ducted.
The MXZ versions are intended for multi-system air conditioning and provide exceptional energy efficiency as well as flexibility when expanding the ductless solution in a multi-room setting. Applications that call for connecting several indoor units to one outdoor unit can use the MXZ units. Eight (air handlers) can be used, spread among the same number of rooms, but only one exterior unit is required. If you want to have comfort throughout your entire home but don’t want to use more than one outdoor unit, MXZ Multi-splits are your best option.
It has been established that the best way to address the cooling and heating issues that traditional systems can’t handle is with a ductless mini split system. The ductless micro split systems from Mitsubishi Electric provide a high level of technology, efficiency, performance, and flexibility to satisfy your highest expectations in terms of comfort and convenience despite these constraints. Mitsubishi ductless systems are an excellent solution for your heating and cooling needs because they are constructed with high-tech components and are intended for a variety of purposes. Choose from one of the several Mitsubishi ductless mini split systems we have available to get the ideal unit for your home.
What kind of air conditioner is Mitsubishi?
Mitsubishi provides high-quality items and a ton of features that are just unavailable from other suppliers, but if you don’t invest in a good installation, you won’t get anything out of the firm. The best method to find a skilled technician to install or repair your system is to use a Factory-Authorized contractor. Mitsubishi itself has educated and approved these contractors to service their machinery. When you employ one of these experts, you can be sure that they will handle the system correctly and will know what to do with it. To effectively discuss your budget with your HVAC installer, be prepared with information on local HVAC installation costs.
Mitsubishi HVAC is a trustworthy manufacturer of equipment. Mitsubishi is a great choice if you’re looking for cutting-edge heat pumps, powerful controllers, and quiet equipment that won’t disturb.
Which tiny split brand is the best?
Those who have basements or garage workshops without a central HVAC system may believe that suffering through a hot summer is unavoidable. People who live in older homes without ducting could likewise dread the summer. With the help of ductless air conditioners, you can combat the summer heat without having to spend a lot of money on ducting upgrades.
The condenser of a ductless air conditioner is located outside the house, and the air handler is mounted to the interior wall. Up to 34,000 BTUs (British Thermal Units) of power can be output by these strong AC units, which is sufficient to cool a room larger than 1,400 square feet. Many include heating capabilities as well, which helps keep a space warm in the winter and cool in the summer.
- Senville SENL-24CD Mini Split Air Conditioner Heat is the best overall.
- Della 12000 BTU Mini Split Air Conditioner: BEST VALUE FOR THE MONEY
- Pioneer Diamante Ductless Mini-Split Air Conditioner: BEST FOR LARGE SPACES
- Cooper & Hunter’s 9,000 BTU Ductless AC/Heating System is the best option for small spaces.
- The DAIKIN 18,000 BTU Ductless AC Heat Pump System is BEST FOR GARAGES AND BASEMENTS.
- The MRCOOL DIY 24k BTU Ductless Heat Pump Split System is the smartest.
- Think about the SereneLife SLPAC portable air conditioner as well.
Are mini-splits energy-intensive?
Individual rooms or regions of your home can be cooled or heated using mini-split systems. They might therefore use less energy than central HVAC systems. But you’ll probably want to ask yourself, “Do mini-splits use a lot of electricity? ” before you put one in your house.
Mini-splits are an energy-efficient solution because they typically use much less electricity than central air conditioning and heating systems. The majority of them use 600 watts per hour or less. However, energy use varies according to use, temperature settings, and the state of the appliance.
How durable are Mitsubishi mini-splits?
An HVAC system’s service life is type-dependent. The typical lifespans of common HVAC equipment are as follows:
- Furnaces Gas furnaces typically survive 20 to 30 years or longer with regular maintenance. A furnace is typically replaced when the heat exchanger begins to leak because it is one of the most important and expensive parts. While oil furnaces normally survive just 10 to 15 years due to maintenance issues brought on by the inefficient fuel, systems that are badly maintained or of questionable quality may only last 10 years.
- BoilersBoilers typically have a lifespan of 20 to 35 years, which is slightly longer than that of furnaces. They are typically changed when the heat exchanger begins to leak.
- Most air conditioners have a lifespan of 15 to 20 years, while some may only last 10 years or less. They normally only endure seven to twelve years in coastal areas because of salt exposure. When the compressor breaks down or the condenser develops substantial corrosion and leaks, both air conditioners and heat pumps are typically replaced.
- Heat pumpsHeat pumps typically last 15 years, although they can survive 10 to 20 years depending on usage. Heat pumps perform similarly to air conditioners in terms of functionality, but because they can also offer warmth and cooling, they are often utilized for longer periods of time each year. With typical lifespans of seven to twelve years, heat pumps in coastal regions will also break down early.
- A/C units without ducts
- Ductless mini-splits, like heat pumps, can provide both heating and cooling, and, with the exception of coastal environments, have an average lifespan of 10 to 30 years.
Even though this is the average lifespan, many homeowners decide to replace their HVAC system earlier. The system will gradually lose efficiency and dependability as it ages, raising maintenance and utility expenses. The monthly energy savings from upgrading to a newer, more efficient model after a system has been in operation for 10 to 15 years can frequently justify the initial cost, particularly if the present system is unreliable or has significant issues.