For as little as $3,499, a ductless heating and cooling system can be fully installed and ready to use. Prices rise from there, depending on a variety of variables.
In This Article...
Ductless Systems Are Whisper-Quiet
You may already be aware of the benefits of ductless heating and cooling for your house, including lower energy expenses and, in certain cases, a return on investment in terms of energy savings.
But what can a homeowner in Central Pennsylvania expect to pay for this cutting-edge, practical heating and cooling solution?
Although ductless mini-split technology has been around for more than 50 years and dominates the HVAC market in Europe and Asia, Pennsylvania households have only had access to it for roughly thirty years.
The adoption of ductless technology in the United States has been slowed down by lack of knowledge and sporadic access to educational materials, but its effectiveness has prompted large utility companies, governmental organizations, and homeowners to take note.
One of the HVAC industry’s fastest expanding methods of home heating and cooling is ductless technology, which comes with financial benefits. How much would it cost you to install a Mitsubishi ductless system in your home? It depends, really.
Four main criteria primarily impact the cost of a ductless system:
- The unit’s dimensions
- The unit’s kind
- The quantity and size of the zones (or territories) being covered
- The degree of installation difficulties (how far the indoor and outdoor units are from each other, the construction of the outer wall to be drilled to carry the line sets, etc.)
There are numerous configuration options with these systems (whole house, partial house, one room, etc.) that can move your project from the lower end of the cost spectrum to the highest. At its most basic, a ductless system consists of:
Single Zone Mitsubishi Dustless Installation
The cost of professional installation for the simplest, or single zone, arrangement (which consists of a single wall unit and condenser) ranges from $2,800 to $4,500. Numerous uses, including heating and cooling a sunroom, garage, attic, and some smaller homes, are appropriate for this architecture.
A sun room may be comfortably heated or cooled all year long with just one ductless device.
Multi-Zone Mitsubishi Ductless Installation
Some Pennsylvania residents just require a single ductless air conditioner, whereas other applications benefit more from 3, 4, or 5 units. Everything depends on how your house is set up and what suits you the best.
A two indoor evaporator unit multi-zone system normally costs between $5,900 and $7,500.
If you want to have your system prepared for future extension as budgets permit, we can operate up to five interior units with a single outdoor condenser. We can even come back and add indoor units later.
Depending on the features, a 5-zone system can cost you between $12,000 and $20,000.
Is Ductless A Good Value For My Money?
Although the initial cost of ductless heating and cooling may appear high, you will ultimately save a lot of money because to their increased energy efficiency. You won’t lose energy due to leaking ductwork because there are no ducts.
Additionally, ductless systems require less upkeep than conventional ones. With a multi-zone design, you may independently manage the temperature in each room where an air handler is installed, which results in extra energy savings.
You won’t need to maintain a room’s temperature at the same level as the rest of the house if it isn’t being used.
What is the price of a Mitsubishi split?
Your installer might advise installing longer refrigerant lines if your property is very big, which would raise the cost of installation. Mitsubishi Electric supplied an estimate for the installation of a multi-zone system based on the NEEA study and substantiated by its own data.
The organization estimates that you should budget at least $4,000 to $5,500 for each zone and on average. An average whole-home comfort solution is estimated to cost between $4,000 and $20,000 on average.
The cost estimates are subject to change based on the size and capacity of your system, the age and quality of insulation in your home, the quantity and length of the power and refrigerant lines, and other factors.
Expect the overall time and expenses to rise further if your installation pros are replacing an old or out-of-date air conditioning system. In fewer instances, installing your new micro split system may call for the assistance of other contractors and experts, including carpenters or electricians.
In the end, it is up to the chosen contractors to give you a precise pricing estimate of their services. When requesting an estimate, don’t be afraid to give them as much information as you can because it will help them calculate the overall installation costs more precisely.
How much does installing a Mitsubishi cost?
Mitsubishi Ductless Installation for a Single Zone It will cost between $4,000 and $6,500 to have a professional install the single zone arrangement, which consists of one wall unit and condenser.
Are tiny splits energy-intensive?
Individual rooms or regions of your home can be cooled or heated using mini-split systems. They might therefore use less energy than central HVAC systems. But you’ll probably want to ask yourself, “Do mini-splits use a lot of electricity? ” before you put one in your house.
Mini-splits are an energy-efficient solution because they typically use much less electricity than central air conditioning and heating systems. The majority of them use 600 watts per hour or less. However, energy use varies according to use, temperature settings, and the state of the appliance.
Mini splits: Are they worth it?
Do you have a central air conditioner that isn’t performing as it should? Do you own a home that has absolutely no air conditioning, making Boston’s sweltering summers intolerable?
A ductless mini split is an option to take into consideration if you said yes to either of these inquiries. There are numerous advantages as compared to other types of systems, such as central air conditioning and window units:
- highly effective, saving you cash on cooling expenses
- Installation is simple because ducting doesn’t need to be run throughout your house.
- Quiet operation means you won’t ever have to worry about a noisy condenser ruining a relaxing day.
It’s simple to think that a ductless mini split will cost you an arm and a leg with so many advantages. However, there is some good news.
Ductless mini splits are quite inexpensive because of how simple they are to install. This is especially true when contrasted to the price of upgrading an older home or replacing a central air conditioning equipment.
In general, you should budget around $3,000 to install a ductless mini split air conditioning system. Of course, this varies depending on specifics like:
how big your house is
For example, a top-of-the-line Mitsubishi system will cost more than one from a lesser-known manufacturer. Attempt to keep in mind that you get what you pay for. You can reasonably anticipate a ductless micro split from a good manufacturer to last 20 years (or more).
You can save money with a ductless mini split in other ways as well:
- Energy-efficient: Due to the absence of ductwork air loss, ductless mini splits are more energy-efficient than central air conditioning systems. Your cooling expense will be lower in the summer thanks to enhanced efficiency.
- No maintenance fees following installation: An expensive and untidy project is adding central air to an existing house. Ductwork installation necessitates the opening of walls, floors, and ceilings. The next step is to repair and patch up all the openings so they match the rest of the space. Even without accounting for the price of the system itself, this will cost you thousands of dollars.
Ductless mini splits are unquestionably cost-effective when you take into account everything you get in return. You not only save money up front, but you also do so in the long run.
Mini splits last how long?
An HVAC system’s service life is type-dependent. The typical lifespans of common HVAC equipment are as follows:
- Furnaces Gas furnaces typically survive 20 to 30 years or longer with regular maintenance. A furnace is typically replaced when the heat exchanger begins to leak because it is one of the most important and expensive parts. While oil furnaces normally survive just 10 to 15 years due to maintenance issues brought on by the inefficient fuel, systems that are badly maintained or of questionable quality may only last 10 years.
- BoilersBoilers typically have a lifespan of 20 to 35 years, which is slightly longer than that of furnaces. They are typically changed when the heat exchanger begins to leak.
- Most air conditioners have a lifespan of 15 to 20 years, while some may only last 10 years or less. They normally only endure seven to twelve years in coastal areas because of salt exposure. When the compressor breaks down or the condenser develops substantial corrosion and leaks, both air conditioners and heat pumps are typically replaced.
- Heat pumpsHeat pumps typically last 15 years, although they can survive 10 to 20 years depending on usage. Heat pumps perform similarly to air conditioners in terms of functionality, but because they can also offer warmth and cooling, they are often utilized for longer periods of time each year. With typical lifespans of seven to twelve years, heat pumps in coastal regions will also break down early.
- A/C units without ducts
- Ductless mini-splits, like heat pumps, can provide both heating and cooling, and, with the exception of coastal environments, have an average lifespan of 10 to 30 years.
Even though this is the average lifespan, many homeowners decide to replace their HVAC system earlier. The system will gradually lose efficiency and dependability as it ages, raising maintenance and utility expenses. The monthly energy savings from upgrading to a newer, more efficient model after a system has been in operation for 10 to 15 years can frequently justify the initial cost, particularly if the present system is unreliable or has significant issues.
What does a tiny split system cost?
Depending on the aforementioned variables, the overall cost may differ greatly, but you should plan to spend between $5,000 and $8,000 each zone. It will cost at least $11,000 if you have more than two zones. A full house of ductless units should cost at least $20,000 to install. This results in a range of about $5,000 to $30,000, or perhaps more.
This range takes installation fees into account, which are frequently omitted from cost listings you’ll see online. Depending on the system, the installation might be quite expensive and complicated, requiring specialized skills and equipment as well as flammable and combustible materials. When you acquire quotations, make sure you’re comparing things on an apples-to-apples basis.
The credentials of the installing firm are the other things to look out for when comparing prices. Since Trane and Mitsubishi just joined, we make sure everything is installed in accordance with manufacturer specifications as certified Trane Comfort Specialists. Years off of your system’s lifespan as well as a decrease in efficiency and comfort can be seen between a fantastic installation and a mediocre one. Although it is possible to find cheaper installations, there is a very high likelihood that they will end up costing you more money overall because they won’t provide you with 24/7 support, certified installation and service, or the necessary training to make sure your system is operating as efficiently as you expect it to.
To put it another way: If something is less expensive, there is a reason for it. Before you consider all of your options, be sure you know why.
The lower pricing level, on the other hand, is for single-head systems that require no more than 15 feet of line, no additional installation work, such as cutting into a home’s woodwork, and no condensate pump installation. Multi-head systems at the top of the range would have more complicated mechanical and installation requirements, as well as a more potent outside unit powering the many interior units.
Can I put in a mini-split on my own?
A condensing unit outside the house, an air handler within the house, refrigerant lines connecting the units, and electrical wire powering the units are all necessary for a DIY mini split installation. Because the refrigerant line needs to be cut and charged, the majority of ductless mini split systems are installed by a professional. You may put up the air handler and condenser on your own while hiring a technician to finish the refrigerant line installation.
Select a tiny split system that fits your space before you begin the installation process. Following are your choices:
- Ductless mini splits for one zone. These are made to heat or cool a single room, such as a bathroom, kitchen, extension, attic, or garage. The units have a single condenser and an individual air handler. The smallest and simplest systems to install are these.
- ductless mini splits with two zones. These tiny split units include two air handlers that are each powered by a separate condenser unit and are intended to heat or cool two spaces. For a full house where it is necessary to manage the temperature in various rooms, dual-zone micro split air conditioners and heat pumps are the best option.
- ductless micro splits with many zones. Multi-zone mini splits have a condenser unit made to support several air handlers and are intended to heat or cool distinct zones. Always consult the manufacturer’s instructions when figuring out how to install micro split heat pumps on multi-zone models because these installations can be trickier than others.
The British Thermal Unit (BTU) output of the system will help you choose the proper size mini split for your room. The popular options for providing optimum temperature management for a variety of large and small spaces are t2 ton and f4 ton mini split systems. Measure your room and obtain square footage estimates before making a purchase. This will enable you to pick a tiny split with the right size and BTU output for the room. The product manuals from manufacturers include sizing recommendations in relation to BTU.
What is the average installation time for a mini-split air conditioner?
The length of time needed to build a ductless mini-split system will mostly rely on the number of interior units you have. Naturally, a system involving one room will be completed much faster than one involving multiple rooms. Here’s a brief checklist to help you decide whether each room will require its own mini-split unit.
What is the price of a multi split system?
Depending on how many split air conditioning units are installed, the cost to install a multi-split air conditioning system ranges from $3,900 to $4,500. These units use less energy than central air conditioning systems since they are ductless.