In order to prevent the headlights from pointing too high if there is weight in the back, AFS adjusts the headlamp level to how the vehicle is sitting. You cannot disable the adaptive system because it must be present by law in any car equipped with LED or HID lighting.
In This Article...
My AFS light is on, why?
When it is safe to do so, pull over to the side of the road and turn off the engine if the AFS indication illuminates and begins blinking while you are driving. When driving with the ignition switch in the ON (II) position, if the AFS indicator blinks continuously or blinks once more, the AFS is malfunctioning (see page ).
Why is there an AFS light on a Lexus?
The term “adaptive front-lighting system” (AFS) refers to headlights that turn in the direction a car is turning, illuminating more of the road in that direction rather than straight ahead.
Many automakers, including Honda, Mazda, Toyota, and others, refer to adaptive front illumination. They are also known as adaptive headlights or curve-adaptive lights, and other manufacturers have their own brand names for them, like the Genesis Adaptive Cornering System and the Porsche Dynamic Light System.
What does AFS on an automobile mean?
A well-illuminated field of view is one of the most crucial elements in reducing driver tiredness and enhancing safety during nighttime driving. According to the conditions of the road, the Adaptive Front-lighting System (AFS) improves the distribution of headlight light. The device directs the low-beam headlights in the direction the driver desires to go based on vehicle speed and steering input.
The technology improves the driver’s field of vision and visibility around curves and at intersections during nighttime driving by illuminating a greater distance and brighter than halogen headlights do. When combined with auto-leveling, the technology provides a consistent light distribution that is unaffected by the location of the vehicle. When a car’s back is loaded down with a lot of people or luggage, its position varies when driving over a bump or up a slope, and the system maintains the lighting axis, it helps keep drivers of incoming vehicles from being blinded.
How can I determine if I have AFS?
When you start the car with the lights on, if your lights move left and right before immediately returning to the center, you have AFS. According to my recall, the AFS won’t work when the car is at a stop; following initial calibration, the lamps must move when the car is going.
What does VSC on a Lexus stand for?
VSC, or “Vehicle Stability Control,” is a safety function in your Lexus ES that aids in preventing skidding if you lose traction when driving through Long Beach.
THE TECHNOLOGY BEHIND IT
Adaptive headlights are not permanently locked in place like regular headlights, which are only able to illuminate the area directly in front of you. These headlights use electronic sensors that use your steering angle to determine which way to swivel in accordance with the direction of your car.
WHAT YOU NEED TO DO
Use these headlights as you normally would, and be aware of any objects or other cars they may be shining on, especially when driving around curves. Always look ahead when driving to check for potential risks or impediments.
TIPS FOR USING IT
- It’s a good habit to look toward the white lines on the side of the road in front of you when approaching oncoming automobiles with your high lights on to assist protect you from being blinded.
- Avoid oversteering at all costs or you risk losing control if you don’t respond quickly enough to a hazard.
- As you approach a curve, slow down and exercise caution.
How is AFS light operated?
Modern vehicles dynamically change the headlights to try to improve nighttime vision. In this post, we’ll first look at this technology’s benefits. The fundamental building blocks and design issues will then be briefly covered.
Introduction
The goal of adaptive front lighting systems (AFS) is to dynamically change the vehicle’s headlights to provide the driver with the best possible nighttime visibility without endangering the safety of other road users. When the car steers or the road is uneven, the AFS uses stepper motors to regulate the headlight angle. Additionally, the adaptive mechanism seeks to prevent a direct glare from hitting approaching cars. It makes use of headlamps with an array of LEDs.
Some of these LEDs automatically dim depending on where the approaching car will be. In this manner, the driver’s side is dimmed while the area around the approaching car is lit. The position of the approaching vehicle is discovered by the AFS using image sensors. Figure 1 demonstrates how the AFS modifies the headlights to lighten the approaching car’s driver side.
How do I reset the AFS light on my Lexus es350?
As installed in the Lexus RX 450h, Lexus’ Intelligent Adaptive Front Lighting System is a driver assistance that modifies the direction of the headlights in reaction to steering inputs and vehicle speed, effectively pointing the low-beam headlights towards the corner and improving your view.
The system is set to be activated by default, but if you’d like to temporarily turn it off, follow the instructions in the tutorial video below or continue reading for a step-by-step ‘how to’.
- Press the “MENU” button on the Lexus RX’s steering wheel, then use the arrow buttons to cycle through the options until “AFS” appears on the dash display.
- By pressing the “ENTER” button on the steering wheel, the system is turned off and the dash display indicator changes to “AFS OFF.”
- To return to the main display, click the “MENU” button one more time.
- Repeat the process to change the display from “AFS OFF” to “AFS ON” to re-activate the system. Resuming operation is the Intelligent Adaptive Front-Lighting System.
What does the Lexus AWD system do?
In order to increase traction, the Lexus AWD system automatically distributes power between two or four wheels, varying the distribution from 50/50 to 30/70, as necessary. Cornering Control is a component of this technology that can correct oversteer and understeer.
What automobiles feature headlights that can curve?
ten vehicles have adaptive headlights
- 2 Door MINI Hardtop.
- Jetta from Volkswagen.
- Toyota Mazda3.
- The Mazda6.
- Elantra by Hyundai.
- Q50 Infiniti.
- Outback Subaru.
- CC Volkswagen
What is Toyota’s AFS?
To enhance vision while cornering at night, intelligent AFS reroutes low-beam light units in line with the steering angle and vehicle speed.
Bits of Knowledge
Depending on the cornering direction and the nation in which you reside, the angle of the irradiation axis can be altered. These variations exist because, for right-hand drive vehicles, the left light is designed to illuminate a wider area than the right light. Toyota has therefore made the left light less movable to prevent blinding oncoming motorists.
How much does a Lexus VSC repair cost?
Lexus VSC repairs would cost between $200 and $300. But that depends on what made the light come on. Vsc collaborates with the ABS and other auto parts.
Can you drive safely with the VSC light on?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.
Why are my traction control light, check engine light, and flashing VSC light on?
You must stop driving the car if the check engine light is flashing. If the engine controller has identified a problem with the engine management system, the check engine light will illuminate steadily. If the defect is likely to harm the catalytic converter, it will flash. The VSC light, which is for the Vehicle Stability Control system, is likely signaling that whatever issue is present, it affects both systems. In other words, you probably only need to do one repair to fix both lights. The warning lights also let you know that the controller has fault codes that can be read by a technician using the right scanning tools. The diagnosis will be aided by this. If you get in touch with YourMechanic, they’ll send a specialist to your house or place of business to check your car’s controllers for codes and advise you on the best course of action.
What is Lexus ECT Snow?
If at all feasible, we advise keeping off the roads when it’s icy. However, if you must brave the bitter cold while driving on snowy or icy streets, the following modern systems can keep you safe.
Snow mode on an electronically controlled transmission (ECT) throttle response is slowed down for more gradual acceleration on ice and snow to help prevent wheel spin. Additionally, the transmission will change into a higher gear more quickly than in regular mode. The road conditions we recently passed through were ideal in this situation.
The ABS sensors are used by TRACTraction Control System (TRAC) to continuously track each wheel’s rotational speed. The algorithm instantly determines the optimal approach to regain traction as soon as they notice that one or more wheels are starting to slip. The brake actuator then applies the necessary amount of braking pressure to the best-suited wheel (or wheels) until traction is regained, after which the engine’s computer control unit adjusts the throttle as necessary. Only shut off if you’re stranded and you need to shake the car to get out.
Vehicle Stability Control (VSC) helps you when you turn too quickly or have to brake hard in the middle of a corner. Sensors track and compare speed, steering angle, yaw rate, and deceleration continually. When the system detects a loss of control, VSC intervenes and temporarily sets the amount of braking force applied to each wheel individually. Additionally, until the tendency of the front to go wide (understeer) or the rear to break away (oversteer) is controlled, the throttle is moderated.
Please don’t hesitate to contact our Park Place Lexus Technology Specialists at Park Place Lexus Grapevine and Park Place Lexus Plano if you have any questions about how the technology features in your Lexus vehicle work.